Manual de instrucciones de Fusion ElectronicsPP-CM525

Resumen del contenido incluido en la página 1

POWERPLANT
COMPONENT SPEAKERS
WARNING: Do not drill mounting holes with speaker in place, as this could allow drill shavings to damage the voice coil.
Always ensure the audio system is turned off before making any connections to the amplifier, speakers, crossover or
PP-CM525, PP-CM650
source unit. Failure to do so could result in permanent damage to the audio system.
When wiring the speakers, ensure that the wire is protected from sharp metal objects, and always use rubber grommets
Speaker

Resumen del contenido incluido en la página 2

Diagram A - mesh grille Diagram B - Custom grille Crossover Installation 1. FUSION crossovers are manufactured specifically for use with the FUSION full range component system. Use of any Mesh other crossover may result in damage to one or more of the components. 2. The x-over is designed for installation under the vehicle dash, under the rear parcel shelf or in the trunk of the vehicle. They should not be located where they are subject to moisture, such as a leaky do