Resumen del contenido incluido en la página 1
DVI DVI FM FM 200 2000 0 0 0
EXT-DVI-FM2000
User Manual
www.gefen.com
DVI DVI FM FM 200 2000 0 0 0
EXT-DVI-FM2000
User Manual
www.gefen.com
Resumen del contenido incluido en la página 2
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday, Pacifi c Time Write To: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com support@gefen.com Notice Gefen, LLC reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. DVI FM 2000 Extender is a trademark of Gefen, LLC © 20
Resumen del contenido incluido en la página 3
CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Layout 5 Sender Unit Descriptions 6 Receiver Unit Layout 7 Receiver Unit Descriptions 8 Connecting the DVI FM 2000 9 Wiring Diagram 10 Specifications 11 Warranty CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Layout 5 Sender Unit Descriptions 6 Receiver Unit Layout 7 Receiver Unit Descriptions 8 Connecting the DVI FM 2000 9 Wiring Diagram 10 Specifications 11 Warranty
Resumen del contenido incluido en la página 4
INTRODUCTION Congratulations on your purchase of the DVI FM 2000. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products supplement cross-platform computer systems, professional audio/video environments and HDTV systems of all sizes with hard-working solutions that are easy to implement and si
Resumen del contenido incluido en la página 5
OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVI DUAL LINK FIBER EXTENDER • The DVI Dual Link Fiber Extender only uses multi-mode SC fi ber cables. ATTENTION: Multi-mode fi ber optic cable with a core diameter of 50/125 is required, in order to extend to distance of 1000 feet (300 meters). • In most situations, only the Sender Unit need be powered. However, if the sink (e.g. Display) does not supply enough voltage to the Receiver Unit, then connect the second power supply
Resumen del contenido incluido en la página 6
FEATURES Features • Extends Dual Link DVI up to 1000 feet (300 meters) using multi-mode (50/125) fi ber optic cable. • Supports HD resolutions up to 1080p Full HD. • Supports VESA resolutions up to 1920 x 1200 (WUXGA) @ 60 Hz and 2560 x 1600 (WQXGA) @ 60 Hz. • Optical signal transmission provides improved immunity from electromagnetic interference (EMI). • Supports HDCP pass-through. Package Includes (1) DVI Dual Link Fiber Extender - Sender Unit (1) DVI Dual Link Fiber Extender - Receiver Unit (
Resumen del contenido incluido en la página 7
SENDER UNIT LAYOUT Top Front 3 2 1 Back Back 4 4 4 SENDER UNIT LAYOUT Top Front 3 2 1 Back Back 4 4
Resumen del contenido incluido en la página 8
SENDER UNIT DESCRIPTIONS 1 Status This LED indicator will glow bright blue, indicating that there is a valid connection between the Sender Unit and Receiver Unit. This LED will glow red when there is an interruption in the signal between the Sender Unit and the Receiver Unit. 2 Power Receptacle Connect this cable to the included 5 V DC power supply. 3 SC Fiber Connectors Connect two SC Fiber Optic cables from the Sender Unit to the Receiver Unit. Make sure that the Fiber Optic cables from bo
Resumen del contenido incluido en la página 9
RECEIVER UNIT LAYOUT Top Front 3 2 1 Bac Backk 4 6 6 RECEIVER UNIT LAYOUT Top Front 3 2 1 Back Back 4 6
Resumen del contenido incluido en la página 10
RECEIVER UNIT DESCRIPTIONS 1 Status This LED indicator will glow bright blue, indicating that there is a valid connection between the Receiver Unit and Sender Unit. This LED will glow red when there is an interruption in the signal between the Receiver Unit and the Sender Unit. 2 Power Receptacle Connect this cable to the included 5 V DC power supply. 3 SC Fiber Connectors Connect two SC Fiber Optic cables from the Receiver Unit to the Sender Unit. Make sure that the Fiber Optic cables from b
Resumen del contenido incluido en la página 11
CONNECTING THE DVI FM 2000 How to Connect the DVI FM 2000 1. Connect the Dual Link DVI source to the Sender Unit. 2. Connect the Dual Link DVI display to the Receiver Unit. 3. Connect the Sender Unit and Receiver unit together using two SC multi-mode fi ber optic cables. IMPORTANT: On the bottom of both the Sender Unit and Receiver Unit, each fi ber optic port is identifi ed by the letter A or B. Make sure that the fi ber optic cables between the Sender Unit and Receiver Unit are connected to the
Resumen del contenido incluido en la página 12
WIRING DIAGRAM Wiring Diagram for the DVI FM 2000 SC FIBER OPTIC CABLE Sender DVI Source Receiver DVI Display EXT-DVI-FM2000 ATTENTION: This product should always be connected to a grounded electrical socket. 9 WIRING DIAGRAM Wiring Diagram for the DVI FM 2000 SC FIBER OPTIC CABLE Sender DVI Source Receiver DVI Display EXT-DVI-FM2000 ATTENTION: This product should always be connected to a grounded electrical socket. 9
Resumen del contenido incluido en la página 13
SPECIFICATIONS Maximum Pixel Clock................................................................................................................2 x 165 MHz Input Video Signal.....................................................................................................................1.2 volts p-p Input DDC Signal................................................................................................................5 volts p-p (TTL) DVI Connector (Sender / Receiver)..............
Resumen del contenido incluido en la página 14
WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notifi ed within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifi cations. The two year warranty is only valid on new products purchased as of January 2007. All products purchased bef
Resumen del contenido incluido en la página 15
Rev A1 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.com This product uses UL listed power supplies. Rev A1 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com support@gefen.com This product uses UL listed power supplies. *ma-DVI-FM2000* *ma-DVI-FM2000*
