Manual de instrucciones de Winegard MS-2006 BULK

Resumen del contenido incluido en la página 1

®
WINEGARD
®
METROSTAR VHF/UHF
OMNIDIRECTIONAL TV ANTENNA
AMPLIFIED MODEL MS-2000 (MS-2006 BULK), MS-2002
NON-AMPLIFIED MODEL MS-1000 (MS-1006 BULK), MS-1002
(MAST NOT INCLUDED)
Made in U.S.A.
INSTRUCTIONS
WARNING!
WARNING!
DANGER OF ELECTROCUTION TO PREVENT FIRE OR SHOCK HAZARD, DO
CHECK AREA AROUND ANTENNA SITE NOT EXPOSE POWER SUPPLY SECTION OF
FOR OVERHEAD WIRES. DO NOT ALLOW THIS APPLIANCE TO RAIN OR MOISTURE.
ANTENNA, MAST OR GUY WIRES TO CONTACT
OVERHEA

Resumen del contenido incluido en la página 2

DESCRIPTION PARTS LIST ® Winegard’s MetroStar antenna with fixed FM trap MS-2000 (88 to 108 MHz) (MS-2000/2002/2006 only) provides Amplified Antenna Head ............................................. excellent reception of VHF/UHF TV channels for home Mounting Bracket.......................................... 3720317 use in most viewing locations. The MetroStar antenna’s 1 Mast Clamp ............................................... 3640051 compact modern styling is unobtrusive and blends well

Resumen del contenido incluido en la página 3

ANTENNA MOUNTING INSTRUCTIONS TIPS: STEP 1: Attach mounting bracket to bottom of antenna If splitting the signal to multiple TVs or combining with as shown in Figure 1 and mount antenna on mast. The another signal source, it is strongly recommended that tab on the plastic screw and notch on the bracket ensure the power injector be installed between the antenna a secure connection. Use center set of holes on bracket. and the splitter/combiner input. In this case, the cable Tighten U-bolt

Resumen del contenido incluido en la página 4

TYPICAL HOME INSTALLATIONS ROOF MOUNT ATTIC MOUNT WALL MOUNT HOW TO PROVIDE LIGHTNING PROTECTION FOR EXAMPLE OF ANTENNA Antenna lead in wire GROUNDING AS PER YOUR TV ANTENNA AND SET NATIONAL ELECTRICAL CODE (For outside mount) INSTRUCTIONS Mount lightning arrestor as close as possible to where lead-in enters house. Ground wires for both mast and lead- in should be copper or aluminum wire, number 8 or larger. Ground Clamp Lead-in wire from antenna to lightning Antenna discharge unit arresto