Resumen del contenido incluido en la página 1
PROFESSIONAL DIRECT DRIVE TURNTABLE
OWNER'S MANUAL
VESTAX CORPORATION
1-18-16 Wakabayashi, Setagaya-ku, Tokyo 154-0023 Japan
Phone : 03-3412-7011 Fax : 03-3412-7013
E-mail : info@vestax.com
www.vestax.com
VESTAX Europe Ltd.
Unit 5, Riverwey Industrial Park
Alton, Hampshire GU 34 2QL, England.
Phone : (0)1420-83000 Fax : (0)1420-80040
www.vestax.co.uk
Resumen del contenido incluido en la página 2
CONGRATULATION Thank you for purchasing the Vestax PDX-2300MkII/MkII Pro, Professional Direct Drive Turntable. Please read this owner's manual carefully, so that you will fully understand all of the special features and enjoy the full use of this product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RlSK OF ELECTRlC SHOCK ( ) DO NOT REMOVE COVER OR BACK NO USER-SERVICEABLE PARTS INSIDE REFER SERVlCING TO QUALIFIED SERVlCE PERSONNEL The lightning flash with arrowhead, symbol
Resumen del contenido incluido en la página 3
IMPORTANT SAFEGUARDS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read instructions-All the safety and operating instructions 13. Protective Attachment Plug-The appliance is equipped with an should be read before the appliance is operated. attachment plug having overload protection. This is a safety feature. See I
Resumen del contenido incluido en la página 4
FEATURES • Advanced analogue turntable. • Enhanced pitch control. Fast and accurate beat matching adjustment with a 100mm +/-10% fine pitch fader. Ultra pitch control with a +/-50% control fader. Combined the total amount you can adjust the pitch by is a huge +/-60%pitch. Furthermore, with the pitch bend joystick, you can quickly push or pull the pitch for smooth mixes or dynamic effects. • Digital Pitch Display. A large display, showing the current pitch setting, allows you to accurately set th
Resumen del contenido incluido en la página 5
PARTS Front Turntable Platter(Option 2 ) Spare Cartridge Stand Center Spindle Tone-Arm Height Fixed Screw Balance Weight(Option 5 ) Dynamic Needle Power Switch Pressure Adjustment Knob EP Adapter Holder Tone-Arm Height Gauge Tone Arm Arm Rest Slip Mat(Option 3 ) Headshell (Option 4 ) START/STOP Button Speed Select Button Fine Pitch Fader Detachable Stylus Illumination Jack START/BRAKE Controller Reverse Switch Ultra Pitch Fader Pitch Bend Joystick Rear Remote-control Jack SERIAL NO. RL REMO
Resumen del contenido incluido en la página 6
ASSEMBLY AND SET-UP Turntable Assembly DRIVER qPlace the platter on the center spindle. The platter will adjust itself to best fit over the spindle. w Adjust the positioning of the platter so that the screw holes line e up perfectly. r e Screw and tighten accordingly. r Place the slip mat on the platter. w *** Care should be taken to avoid dropping either/both, the platter or the cabinet. q • If the player is operated without fixing the screws, the platter may not rotate properly. • Do not plug
Resumen del contenido incluido en la página 7
Cartridge Installation qMake sure that you follow the instructions included with your NUT cartridge. wConnect the lead wires to the respective terminals. Industry standard cartridges come with color-coded wires. Make sure that you match these colors correctly. SHELL LEAD WIRE (OPTIONr) SHELL WEIGHT TERMINAL (OPTIONy) (ACCESSORY) If using a light weight cartridge, we suggest the use of CARTRIDGE the shell weight enclosed. (ACCESSORY) STYLUS (ACCESSORY) SCREWS (ACCESSORY) eThe overhang of your ca
Resumen del contenido incluido en la página 8
INSTALLATION AND CONNECTION Power Connection Player Installation Plug in the unit to a power outlet. • Do not expose this unit to direct sunlight, or install in an area that is typically humid and/or damp. • Place this unit on a stable, horizontal service in order to limit vibration and poor tracing/action of the tone arm. This unit has been manufactured to strict quality and • Locate this unit at a suitable distance from any speakers so as safety standards. PLEASE ENSURE that you use to avoid
Resumen del contenido incluido en la página 9
( ) ADJUSTMENT S Adjustment of Overhang As shown in the illustration, overhang indicates the distance from the stylus tip to the center of the turntable spindle when the stylus tip falls on the extension of a straight line from the pivot of the tonearm to the center of the spindle. If this adjustment is not correct, the stylus will not track the grooves properly. ToneArm Center q Loosen the two cartridge mounting screws. Center Spindle w Position the tonearm over the center spindle. eSlide the
Resumen del contenido incluido en la página 10
Adjustment of Stylus Puressure qHold the balance weight with one hand as shown in the drawing, and rotate only counter ring to bring the numeral "0" Balance Weight of the ring into alignment with the center line on the tone-arm rear shaft. Rotate this part If the balance weight is moved, readjust the horizontal Counter Ring balance again. wTurn the balance weight to present the reading on the gauge to the designed stylus force of your cartridge. Balance Weight As counter ring moves in step with
Resumen del contenido incluido en la página 11
OPERATION q Place a record on the slip mat. wSwitch on the unit using the Power on/off switch located on the rear panel. e Remove the stylus protector if applicable. r Start the platter spinning with the START/STOP button. t Position the tone arm over the record and gently lower to begin playback. y Set the playing speed to either 33 1/3 or 45 RPM. When turned on this unit is set to play at 33 1/3 RPM. To adjust to a 45RPM speed setting, press the 45 RPM button. This unit does not use a cue lev
Resumen del contenido incluido en la página 12
Advanced Pitch Control Features The PDX-2300MkII/MkIIPro features advanced digital pitch control features. Through three different controls you are able to adjust the playing pitch by up to +/-60%. qPITCH BEND & ULTRA SHIFT Using the pitch bend joystick will allow you to quickly pull or push the playing pitch of this unit. To pull means to slow down, push means to speed up. Pushing the joystick towards the tone arm will result in you being able to pull (minus) the playing pitch. Pushing the jo
Resumen del contenido incluido en la página 13
Start Speed You can adjust the starting speed of the platter by adjusting the SPEED ADJUSTMENT 'START' dial. A clockwise rotation slows down the starting speed whilst an anti clockwise rotation will speed it up. At its maximum setting after pressing the START button, the PDX-2300MkII/MkIIPro has an amazingly quick start up (to full speed) of around 0.5 seconds. Brake Speed As well as being able to change the start speed, you can alter the speed at which the platter brakes or slows down. A clockw
Resumen del contenido incluido en la página 14
SPECIFICATION 12AZ851010
