Manual de instrucciones de Stanton SA-5

Resumen del contenido incluido en la página 1

SA-5
The Official Mixer of
The Allies All-star Beatdown
OWNER’S M A N U A L
STANTON MAGNETICS, INC
info@stantonmagnetics.com
www.STANTONDJ.com
© 2003, Stanton Magnetics, Inc.

Resumen del contenido incluido en la página 2

W E L C O M E ! W A R R A N T Y This unit has been designed and manufactured using quality components. Thank you for making Stanton your first choice in professional DJ mixers. This Therefore, it is warranted to be free from defects in materials (limited as specified innovative mixer has been developed with input from the professional DJ below), and workmanship for a period of twelve (12) months from the original community, bringing to the marketplace a previously unavailable, affordable purchas

Resumen del contenido incluido en la página 3

T E C H N I C A L S P E C I F I C AT I O N S S A - 5 F E A T U R E S Line input: 2 (RCA) x 2 channels, -10 dBV / 10 kOhm The SA-5 “The Official Mixer Of The Allies All-Star Beatdown” Session Input: 2 (RCA), -10 dBV / 10 kOhm Phono input: 2 (RCA) x 2 channels, -50 dBV / 47 kOhm Introducing the world’s first all fader battle mixer. Designed by Stanton based on DJ Infamous’ requirements, the SA-5 is a high-end, affordable mixer with all the Mic input: 1(1/4") -50 dBV / 2.4 kOhm balanced requirement

Resumen del contenido incluido en la página 4

DESCRIPTION OF FUNCTIONS FADER CLEANING AND REPLACEMENT 5. Examine the center channel of the fader body (found inside the bottom of 2 3 4 the fader casing) and if dirty, clean using cotton buds. 6. Re-assemble and lubricate the fader as follows: a) Secure the end block and guide rail onto the fader body. b) Insert track into the fader body. 1 c) Insert slider assembly onto guide rail and into the fader body. Move 6 slider from end to end to disperse the oil evenly. Carefully wipe away any excess

Resumen del contenido incluido en la página 5

FADER CLEANING AND REPLACEMENT M I X E R F U N C T I O N S After constant scratching, the SA-5 faders may need to be cleaned and 6. Crossfader Reverse: Reverses the direction of the crossfader. When lubricated from time to time. This will ensure long life and keep a smooth feeling switched down, channel 1 will be assigned to the right side of the throughout the fader's lifetime. Follow the instructions below to lubricate and crossfader, and channel 2 to the left side. clean your faders: 7. OS2 l

Resumen del contenido incluido en la página 6

BACK P A N E L B A C K PA N E L 28. Headphone output: Standard 1/4” headphone output connector. 22 23 25 26 26 27 25 29. Session/Mic switch: Used to assign the Session/Mic fader to either the Session input or the MIC input. 30. Microphone input: 1/4” connector for connecting a microphone. 31. Phono Inputs: Phono level inputs for channels 1 and 2. Do not plug line 20 outputs into phono inputs. 28 32. Line inputs: Line level inputs for channels 1 and 2. 29 19 30 F R O N T PA N E L 21 24 31 32