Manual de instrucciones de Pro-Ject RPM 1.3 Genie

Resumen del contenido incluido en la página 1

INSTRUCTIONS FOR USE
Pro-Ject RPM 1.3 Genie

Resumen del contenido incluido en la página 2

9 8 10 4 1 13 12 11 5 6 2 16 7 3 14 Controls, features and connections 1/11 Power switch, motor unit with stepped drive pulley 2 Drive belt * 3 Platter 4 Tonearm counterweight * 5 Tonearm lift lever 6/16 Tonearm rest and removable transport lock 7 Tonearm tube 8 Power supply socket 9 Phono output sockets and earth connection 10 Anti-skating weight * 12 Anti-skating weight support hoop 13 Anti-skating weight adjustment scale 14 Headshell with finger lift and fitted Ortofon OM 3E

Resumen del contenido incluido en la página 3

PRO-JECT RPM 1.3 Genie Dear music lover, thank you for purchasing a PRO-JECT AUDIO record player. In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully. Warning of a hazard for the user, the unit or possible misuse. Important notice. The record player is supplied with a factory fitted and adjusted cartridge. ** The following instructions for adjusting the cartridge are provided in case the cartridge is r

Resumen del contenido incluido en la página 4

Adjusting the azimuth ** The cartridge needle must be vertical in the record groove in order to trace the groove wall modulations correctly. A small screw at the bearing end of the arm allows incorrect azimuth to be corrected if your needle is not mounted exactly perpendicular to the cartridge body (which is often the case). Screw Slacken off the screw just enough to be able to revolve the arm tube without applying force. Please note: do not remove the screw completely! With the aid of

Resumen del contenido incluido en la página 5

Changing replay speed Put the belt (2) over the larger diameter part of the motor pulley (11). To revert to 33 1/3 r.p.m. repeat the proceedings using the smaller step on the pulley. When the Pro-Ject Speed Box ore the Speed Box SE are used speed change between 33 and 45 r.p.m. is electronic. There is no need to move the belt manually. For detailed product information please refer to the Pro-Ject web site www.project-audio.com. Maintenance and cleaning Your record player requires little

Resumen del contenido incluido en la página 6

Potential incorrect use and fault conditions PRO-JECT turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included. The platter doesn't turn although the unit is switched on: The unit is not connected to the m

Resumen del contenido incluido en la página 7

Platter Chassis Motor © Audio Trade GmbH · Pro-Ject RPM 1.3 Genie / Ortofon OM 3E · Revision 4.5.09/15.10.09 7 Power supply Interconnect cables