Manual de instrucciones de Shindaiwa X7502824900

Manual de instrucciones del aparato Shindaiwa X7502824900

Aparato: Shindaiwa X7502824900
Categoría: Podadora eléctrica
Fabricante: Shindaiwa
Tamaño: 2.03 MB
Fecha de añadido: 6/24/2013
Número de páginas: 28
Imprimir el manual

Descargar

¿Cómo se utiliza?

Nuestro propósito es proporcionarte el acceso más rápido posible a los contenidos incluidos en los manuales de instrucciones del aparato Shindaiwa X7502824900. Utilizando la vista previa online, puedes ver rápidamente el índice de contenidos y pasar a la página donde encontrarás la solución a tu problema con Shindaiwa X7502824900.

Para tu comodidad

Si ver los manuales de instrucción de Shindaiwa X7502824900 directamente en esta página no es cómodo para ti, puedes utilizar dos soluciones posibles:

  • Vista en pantalla completa – Para ver cómodamente los manuales de instrucciones (sin descargarlos en tu ordenador) puedes utilizar el modo de vista en pantalla completa. Para activar la vista del manual Shindaiwa X7502824900 en pantalla completa, utiliza el botón Pantalla completa
  • Descargar al ordenador – también puedes descargar el manual de instrucciones de Shindaiwa X7502824900 a tu ordenador y guardarlo en tu colección. Sin embargo, si no quieres ocupar espacio en tu dispositivo, siempre podrás descargarlo de ManualsBase.
Shindaiwa X7502824900 Manual de instrucciones - Online PDF
Advertisement
« Page 1 of 28 »
Advertisement
Versión impresa

Muchas personas prefieren no leer el documento en la pantalla, sino en versión impresa. La opción de impresión también está prevista y puedes utilizarla haciendo clic en el enlace más arriba - Imprimir el manual. No tienes que imprimir el manual completo de Shindaiwa X7502824900, solo las páginas que elijas. Ahorra papel.

Resúmenes

A continuación encontrarás resúmenes de los contenidos incluidos en las páginas posteriores del manual de instrucciones para Shindaiwa X7502824900. Puedes utilizarlos si quieres ver rápidamente el contenido que se encuentra en la siguientes páginas del manual.

Resúmenes de contenidos
Resumen del contenido incluido en la página 1

SHINDAIWA OWNER’S/OPERATOR’S MANUAL
T254 TRIMMER
WARNING!
Minimize the risk of injury to yourself and
others! Read this manual and familiarize yourself
with the contents. Always wear eye and hearing pro-
tection when operating this unit.
X7502824900
04/10

Resumen del contenido incluido en la página 2

Introduction The Shindaiwa H4 series of hand-held power equipment is designed and built to deliver superior performance and reliability without compromise to quality, comfort, safety or durability. Shindaiwa engines represent the leading edge of high-perfor- mance engine technology, delivering exceptionally high power with remarkably low displacement and weight. As an owner/ operator, you’ll soon discover for yourself why Shindaiwa is simply in a class by itself! IMPORTANT! The information c

Resumen del contenido incluido en la página 3

Warning and Operational Labels WARNING !Surface can be hot. Al- Make sure no one is within ways wear gloves when handling Read and follow this operator's 50FEET 15 M / 50 feet of an operating (15m) this unit. manual. Failure to do so could machine. result in serious injury.. HOT SURFACE Beware of thrown or Wear eye and hearing protection richocheted objects at all times during operation of this unit. Wear head protection where there is a risk of falling objects. Safety Work Safely Trim

Resumen del contenido incluido en la página 4

Safety Labels READ THE OPERATOR’SMANUAL HOT SURFACE WEAR HEARINGAND ANSI Z87.1 APPROVED EYEPROTECTION 50FEET (15m) KEEP BYSTANDERSAWAY ATLEAST50 FEET(15m) BEWAREOFTHROWN OR RICOCHETED OBJECTS This label indicates the minimum distance between front handle and rear grip per ANSI B175.3. DO NOTOPERATETHIS MACHINEWITH A BLADE ShindaiwaInc. 19422-00028 IMPORTANT! Safety and Operation Information Labels: Make sure all information labels are undamaged and readable. Immediately replace damaged or mis

Resumen del contenido incluido en la página 5

Be Aware of the Working Environment Make sure bystanders Reduce the risk of bystanders being or observers struck by flying debris. Make sure no outside the one is within 15 meters (50 feet)— Avoid long-term 15 meter (50 that’s about 16 paces of an operating operation in very hot feet) “danger attachment. Stop immediately if a child, or very cold weather. zone” wear eye pet, or person comes within a 15 meter protection. (50 feet)radius. Outside this radius, there is still a risk of inj

Resumen del contenido incluido en la página 6

Specifica tions Engine Name T254 Engine Type 4-cycle, vertical cylinder, air cooled Dry Weight (Without guard and strap) 5.0 kg/11.0 lb. Bore x Stroke 34 x 27 mm (1.3 x 1.1 in.) Displacement 24.5 cc (1.5 cu. in.) Fuel/Oil Ratio 50:1 with *ISO-L-EGD or JASO FD class engine oil Fuel Tank Capacity 590 ml (20 oz.) Carburetor Type Diaphragm-type carburetor Ignition One-piece electronic, program-controlled Spark Plug** NGK CMR5H Spark Plug Gap 0.6 mm (0.024 in) Torque 16.7 - 18.6 N∙m (148-165 in •

Resumen del contenido incluido en la página 7

Cutting attachment shield CAUTION A Wear Gloves or personal injury may result: • Cutof f knife is sharp. • Gearcase and surrounding area may be hot. NOTE The plastic shield is for use with the Nylon Line Head only. Install Metal B Shield when using plastic or metal blades. C 1. Remove plastic threaded shaft sleeve and adapter plate (C) from PTO shaft (A). 2. Place the shield on the bottom of the bearing housing flange. 3. Place shield plate (B) on shield, align holes. Install three (3)

Resumen del contenido incluido en la página 8

Front handle installation NOTE Label shows minimum spacing for front handle location. 1. Position front handle for comfortable operation and secure screws. Adjust throttle lever free play The throttle lever free play should be approximately 4 - 6 mm (3/16” - 1/4”). Make sure that the throttle lever operates smoothly without binding. If it becomes necessary to adjust the lever free play, follow the procedures and illustrations that follow. 4-6 mm (3/16”-1/4”) Throttle Free Play Throttle lev

Resumen del contenido incluido en la página 9

Mixing Fuel WARNING! Alternative fuels, such as E15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting Shindaiwa requirements are NOT approved for use in Shindaiwa gasoline engines. Use of alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement. Alternative fuels may also cause premature deterioration of fuel lines, gaskets, carburetors and other engi

Resumen del contenido incluido en la página 10

Storage - Fuel storage laws vary by locality. Contact Mixing Instructions your local government for the laws affecting your area. 1. Fill an approved fuel container with half of the required As a precaution, store fuel in an approved, airtight con- amount of gasoline. tainer. Store in a well-ventilated, unoccupied building, 2. Add the proper amount of engine oil to gasoline. away from sparks and flames. 3. Close container and shake to mix oil with gasoline. 4. Add remaining gasoline, clos

Resumen del contenido incluido en la página 11

Starting the Engine IMPORTANT! Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and “O” for OFF or STOP. WARNING! Never start the engine from the operating position. 1. Slide the ignition switch to the “ON” position. 2. Set the throttle lever to the “fast idle”: ON a. Depress and hold the throttle lock, then squeeze the throttle trigger. b. Depress and hold the fast idle button. c. Release the throttle trigger and throttle loc

Resumen del contenido incluido en la página 12

6. When the engine starts, slowly move the choke lever to the “OPEN” posi- tion. (If the engine stops after the initial start, close the choke and restart.) 7. Operating the throttle will automatically disengage the fast idle setting. Open IMPORTANT! If the engine fails to start after several attempts with the choke in the closed position, the engine may be flooded with fuel. If flooding is suspected, refer to the ”Starting a Flooded Engine” section of this manual. After engine starts, move ch

Resumen del contenido incluido en la página 13

Operation WARNING Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause uncon- sciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and body. Cutting grass with a trimmer head Your Shindaiwa unit may be equipped with one of several Shindaiwa trimmer head models, each with features for specific applications and/or operational requirements. NOTE: For proper oper

Resumen del contenido incluido en la página 14

Maintenance General maintenance IMPORTANT! MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND SYSTEMS MAY BE PERFORMED BY ANY REPAIR ESTABLISHMENT OR INDIVIDUAL; HOWEVER, WARRANTY REPAIRS MUST BE PERFORMED BY A DEALER OR SERVICE CENTER AUTHORIZED BY ECHO,INC. THE USE OF PARTS THAT ARE NOT EQUIVALENT IN PER- FORMANCE AND DURABILITY TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF THE EMISSION CON- TROL SYSTEM AND MAY HAVE A BEARING ON THE OUTCOME OF A WARRANTY CLAIM. NOTE: Us

Resumen del contenido incluido en la página 15

Maintenance (continued) 10-Hour maintenance (more frequently in dusty Loosen fasteners conditions) 1. Remove the air filter cover by loos- ening the cover screw(s) and lifting. Prefilter 2. Remove and inspect the pre-filter. If the pre-filter is torn or otherwise damaged, replace it with a new one. Filter element 3. Clean the pre-filter with soap and water. Let dry before reinstalling. 4. Inspect the air filter element. If the element is damaged or distorted, replace it with a new one.

Resumen del contenido incluido en la página 16

Maintenance (continued) 50 hour maintenance Remove and replace the fuel filter element. ■ Use a hooked wire to extract the fuel filter from inside the fuel tank. Inspect the fuel filter element. If it shows signs of contamination, replace with a genu- ine Shindaiwa replacement fuel filter element. ■ Before reinstalling the new filter ele- ment, inspect the condition of all the fuel system components (fuel pick-up line, fuel return line, tank vent line, tank vent, fuel cap and fuel tank).

Resumen del contenido incluido en la página 17

Maintenance (continued) 135-Hour Maintenance ■ Replace the spark plug annually: ■ Combustion chamber should be Use only the type recommended in decarbonized, and the valve clear- the ”Specifications” section or an ance should be adjusted. It is highly equivalent resistor type spark plug recommended that this is done of the correct heat range. Set spark by a Shindaiwa-trained service plug electrode gap to 0.6 mm. technician. IMPORTANT! The valve clearance should be adjusted. It is high

Resumen del contenido incluido en la página 18

Maintenance (continued) Spark Arrester Screen Maintenance If the engine becomes sluggish and low on power, check and clean the spark arrester screen. Engine Cover WARNING! Engine Cover Never operate the unit with a Screws damage or missing muffler or spark arrester! Operating with a missing or damaged spark arrester is a fire hazard and could also damage your hearing. 1. With a 3 mm hex wrench remove the Muffler engine cover screws and the engine Muffler Gasket cover. 2. With a 4 mm

Resumen del contenido incluido en la página 19

Maintenance (continued) Adjusting Engine Idle The engine must return to idle speed whenever the throttle lever is released. Idle speed is adjustable, and must be set low enough to permit the engine Idle clutch to disengage the cutting attachment. Ajust- ment Screw WARNING! The cutting attachment must NEVER rotate at engine idle! If the idle speed cannot be adjusted by the procedure described here, return the unit to your Shindaiwa dealer for inspection. Idle Speed Adjustment 1. Place the uni

Resumen del contenido incluido en la página 20

Troubleshooting Guide ENGINE DOES NOT START OR HARD TO START Remedy Possible Cause What To Check Let cool completely and restart. Engine hot/heat soaked. Vaporlock. Refill with fresh, clean unleaded gasoline with a pump octane Low fuel quality. of 89 or higher mixed with an air cooled engine oil that meets or exceeds ISO-L-EGD and/or JASO FD classified oils at 50:1 gasoline/oil ratio. Valve adjustment. Valve clearance too tight. Consult with an authorized Shindaiwa servicing dealer. Adjust v


Manuales de instrucciones similares
# Manual de instrucciones Categoría Descargar
1 Shindaiwa 63848-94010 Manual de instrucciones Podadora eléctrica 14
2 Shindaiwa 80844 Manual de instrucciones Podadora eléctrica 8
3 Shindaiwa 80974 Manual de instrucciones Podadora eléctrica 3
4 Shindaiwa 68800-94313 Manual de instrucciones Podadora eléctrica 2
5 Shindaiwa 80775 Manual de instrucciones Podadora eléctrica 0
6 Shindaiwa 81601 Manual de instrucciones Podadora eléctrica 1
7 Shindaiwa 81606 Manual de instrucciones Podadora eléctrica 0
8 Shindaiwa 81372 Manual de instrucciones Podadora eléctrica 0
9 Shindaiwa 81010 Manual de instrucciones Podadora eléctrica 0
10 Shindaiwa 81605 Manual de instrucciones Podadora eléctrica 0
11 Shindaiwa 81646 Manual de instrucciones Podadora eléctrica 0
12 Shindaiwa 81643 Manual de instrucciones Podadora eléctrica 0
13 Shindaiwa 81642 Manual de instrucciones Podadora eléctrica 0
14 Shindaiwa 82014 Manual de instrucciones Podadora eléctrica 0
15 Shindaiwa 89309 Manual de instrucciones Podadora eléctrica 0
16 Sony PCS-G70P Manual de instrucciones Podadora eléctrica 12
17 Sony PCS-G70 Manual de instrucciones Podadora eléctrica 12
18 ABC Office 440 Manual de instrucciones Podadora eléctrica 2
19 Sony 370A Manual de instrucciones Podadora eléctrica 83
20 ABC Office 448 Manual de instrucciones Podadora eléctrica 2