Resumen del contenido incluido en la página 1
s550
models
s650
Resumen del contenido incluido en la página 2
CONGRATULATIONS Congratulations for choosing a Directed cones and neodymium motors, the Studio neodymium component speaker Directed Studio line of automotive system from Directed Electronics. speakers will excite and delight the auto sound enthusiast with years of high Directed Electronics has been the quality audio reproduction. industry leader in high-quality automo- tive security and audio equipment since Directed Studio speakers are covered by 1990, and with the introduction of the a two-yea
Resumen del contenido incluido en la página 3
LIMITED TWO-YEAR CONSUMER WARRANTY Directed Electronics, Inc. (DEI) promises to WARRANTY OF MERCHANTABILITY, FITNESS the original purchaser, to replace this FOR PARTICULAR PURPOSE, AND WARRANTY product should it prove to be defective in OF NON-INFRINGEMENT OF INTELLECTUAL workmanship or material under normal use, PROPERTY ARE EXPRESSLY EXCLUDED TO for a period of two years from the date of THE MAXIMUM EXTENT ALLOWED BY LAW, purchase from the dealer as indicated by the AND DEI NEITHER ASSUMES NOR
Resumen del contenido incluido en la página 4
FEATURES Woofer Swiveling flush and surface mount tweeter housings provided. Retuned neodymium design supplies enhanced midbass perfor- mance. Crossover Outboard 6/12 dB per octave Lightweight injection-molded fiber- crossovers with Zobel compensa- glass-reinforced low-profile basket. tion, tweeter attenuation, and dual Basket incorporates break-away tweeter protection elements. sections for universal domestic and Mylar capacitors in all series pass import applications. positions. Vented
Resumen del contenido incluido en la página 5
SOUND QUALITY Obtaining the highest quality sound designing and installing an auto sound reproduction in the mobile environment system. requires installation techniques and To achieve the best sound quality knowledge of vehicle interiors that go possible from your Directed Studio loud- far beyond simple replacement of stock speakers, Directed recommends the speakers. Speaker location, orientation, installation be performed by an MECP phasing, and the vehicles interior mate- certified technician.
Resumen del contenido incluido en la página 6
WOOFER INSTALLATION Review the Installation Precautions 5. Route the supplied wires through the speaker location to the section of this guide before proceeding. crossover. 1. Place the cutout template against the mounting surface in the desired 6. Install the screw speed clips if not location for the woofer. installing into a metal panel. 2. Draw the speaker hole and 7. Connect the speaker wire to the mounting screw locations on the woofer taking care to observe panel with a marker. proper spea
Resumen del contenido incluido en la página 7
TWEETER INSTALLATION Review the Installation Precautions ring as a template to mark the proper size hole. Cut out the hole. section of this guide before proceeding. 5. With the tweeter assembled, route Flush Mounting into the wires through the hole and the Removed Panels pressure ring and slip the pressure 1. Determine the tweeter mounting ring over the tweeter assembly. location, then route the wires from the crossover to the tweeter location. 6. Align the tweeter so the Directed logo faces th
Resumen del contenido incluido en la página 8
Flush Mounting into proper length machine bolt through Mounted Panels the center hole of the housing and 1. Determine the tweeter mounting connect to the spring steel X- location, then route the wires from bracket. (See Figure 3.) the crossover to the tweeter loca- 6. Connect the speaker wires tion. observing the correct polarity. 2. Mark the center point of the 7. Press the X-bracket portion of the tweeter location. assembly through the hole until its 3. If using a hole saw, first drill a pil
Resumen del contenido incluido en la página 9
Tweeter Surface Mounting 5. After removing the surface mount tweeter assembly trim ring, route 1. Determine the tweeter mounting the tweeter wires through the larger location, then route the wires from hole in the housing and connect to the crossover to the tweeter loca- the speaker wires from the tion. crossover. (See Figure 4.) 2. Place the surface mount housing 6. Insert the excess speaker wire into against the panel and mark the two the hole and position the housing so holes at the rear of
Resumen del contenido incluido en la página 10
Removing Trim Rings housing with the Viper logo at the bottom and turn in a counter clock- Hold the tweeter housing while gently wise direction until the trim ring turning the trim ring in a clockwise direc- clicks into place. tion until it releases. The trim ring can then be easily lifted away from the S Su urrffa ac ce e M Mo ou un nt t A As ss se em mb blly y - Insert the tweeter housing. trim ring into the housing and turn in a counter clockwise direction until Installing Trim Rings the t
Resumen del contenido incluido en la página 11
SPECIFICATIONS Directed model s550 s650 Frequency response 45Hz-21kHz 40Hz-21kHz Power handling RMS 50 60 Power handling peak 100 120 Impedance 3.764 3.435 Magnet weight 52.82 g 5282 g Vas 3.25L 9.28L Fs 88.63 Hz 65.44 Hz Qts 0.42 0.33 Efficiency (1W/1M) 89.209 89.718 Mounting Depth 2.12 2.45 Mounting hole diameter 4.75 5.5 C Co om mm mo on n D Drriiv ve err S Sp pe ec ciiffiic ca at tiio on ns s:: Magnet type Neodymium Neodymium Magnet diameter 1” 1” Voice coil former Kapton Kapton Voice coi
Resumen del contenido incluido en la página 12
The company behind this system is Directed Electronics, Inc. Since its inception, Directed has had one purpose, to provide customers with the finest vehicle security, car stereo products, rear seat entertainment, and accessories available. The recipient of more than 20 patents in the field of advanced electronic Directed Electronics, Inc. technology, Directed is ISO 9001 registered. Vista, California 92083 Directed® is committed to delivering world-class quality products and services that excit