Resumen del contenido incluido en la página 1
325RJ
X-SERIES
Operator's manual
Read through the Operator‘s manual carefully and
understand the content before using the machine.
101 91 73-26
Resumen del contenido incluido en la página 2
15 m 50FT SYMBOL EXPLANATION Symbols • Always wear approved protective gloves. WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator • Use anti-slip and stable boots. or others. Read through the Operator‘s Manual carefully and understand the content before using the machine. • Only use non-metallic, flexible cutting elements, that is trimmer head with trimmer cord. Always use • A protective helmet where
Resumen del contenido incluido en la página 3
CONTENTS Husqvarna AB has a policy of continuous product List of contents development and therefore reserves the right to modify the design and appearance of products without prior notice. SYMBOL EXPLANATION Symbols ............................................................................... 2 CONTENTS List of contents .................................................................... 3 SAFETY INSTRUCTIONS WARNING! Personal protective equipment .............................................
Resumen del contenido incluido en la página 4
SAFETY INSTRUCTIONS Personal protective equipment The machine‘s safety equipment This section describes the machine‘s safety equipment, its MPORTANT INFORMATION function and how checks and maintenance are carried out to • A clearing saw, brushcutter or trimmer used ensure that it operates correctly. (See the chapter “What is incorrectly or carelessly can become a dangerous what“ to locate where this equipment is positioned on your tool, that can cause serious or fatal injury to the machine.) ope
Resumen del contenido incluido en la página 5
SAFETY INSTRUCTIONS 3. Cutting 4. Vibration attachment guard damping system This guard is intended to Your machine is equipped prevent objects from being with a vibration damping thrown towards the system, which is designed operator and to protect the to give as vibration-free operator from and comfortable use as unintentionel contact with possible. the cutting attachment. Use of incorrectly wound cord or incorrect cutting equipment increases the level of vibration. The machine’s vibration dampi
Resumen del contenido incluido en la página 6
SAFETY INSTRUCTIONS 5. Muffler 6. Cutting 1 equipment The muffler is designed to give the lowest possible noise 1) Grass blades are level and to direct the engine‘s intended for brush cutting. exhaust fumes away from the operator. Muffler fitted with catalytic converter is also designed to reduce harmful exhaust components. 2 In countries that have a warm 2) The trimmer head is and dry climate the risk of fire intended for trimming is obvious. We have therefore grass. fitted certain mufflers wit
Resumen del contenido incluido en la página 7
SAFETY INSTRUCTIONS 3. Cutting Control, maintenance and service of attachment guard the machine‘s safety equipment • Ensure that the spray IMPORTANT INFORMATION guard is undamaged and is not cracked. • All service and repairs to the machine require special training. • Replace the guard if it • This applies especially to the machine‘s safety has been exposed to equipment. If the machine does not meet any of impact or is cracked. the controls listed below you should contact your service workshop.
Resumen del contenido incluido en la página 8
SAFETY INSTRUCTIONS 6. Cutting equipment 7. Locking nut This section describes how through correct maintenance and • Protect your hand from through using the right type of cutting equipment you can: injury when assembling, • Reduce the machine‘s tendency to kickback use the blade guard as • Obtain maximum cutting capacity. protection when tightening • Increase the service life of the cutting equipment. with a socket spanner. Tighten the nut by turning The three basic rules: against the direction
Resumen del contenido incluido en la página 9
SAFETY INSTRUCTIONS Cutting equipment • Generally smaller machines require a small trimmer head and vice versa. This is because when clearing using a cord IMPORTANT INFORMATION the engine must throw out the cord radially from the trimmer head and also meet resistance from the grass being The section describes how through correct cleared. maintenance and through using the right type of cutting equipment you can reduce the machine‘s • The length of the cord is also important. A longer cord tendenc
Resumen del contenido incluido en la página 10
SAFETY INSTRUCTIONS Fuel safety General safety instructions IMPORTANT INFORMATION • Always use a fuel container • The machine is only designed for trimming grass. with an anti-spill valve. • The only accessories to be used with the engine unit as a drive source are the cutting units we • Never fill the machine recommend in the chapter “Technical data“. while the engine is • Never use the machine if you are tired, if you running. Always stop the have consumed alcohol, or if you are taking engine
Resumen del contenido incluido en la página 11
SAFETY INSTRUCTIONS General working instructions Basic working techniques • Always drop to idling speed after each working operation. IMPORTANT INFORMATION Longer periods running at full throttle without loading the • This section takes up the basic safety engine (that is without resistance, which the engine feels precautions for working with the trimmer. from the cutting equipment when trimming) can lead to serious engine damage. • If you encounter a situation where you are uncertain how to pro
Resumen del contenido incluido en la página 12
SAFETY INSTRUCTIONS Trimming Grass trimming • The trimmer is ideal to using the trimmer cut grass that is difficult head and plastic to reach using a normal knifes lawn mower. Keep the cord parallel to the • Hold the trimmer head ground when cutting. just above the ground at Avoid pressing the an angle. It is the end of trimmer head against the the cord that carries out ground as this can ruin the work. Let the cord the lawn and damage the work at its own pace. Do tool. not press the cord into t
Resumen del contenido incluido en la página 13
WHAT IS WHAT? 30 29 28 27 = = ¥ ¢ What is what on the trimmer? 16. Clutch cover 1. Trimmer head 17. Handlebar adjustment 2. Grease filler cap 18. Locking nut 3. Angle gear 19. Support flange 4. Spray guard 20. Drive disc 5. Shaft 21. Socket spanner 6. Loop handlebar 22. Operator‘s Manual 7. Throttle 23. Allen key 8. Stop switch 24. Locking pin 9. Throttle trigger lock 25. Support cup 10. Cylinder cover 26. Blade 11. Starter handle 27. Transport guard 12. Fuel tank 28. J-handle 13. Choke 29. Hang
Resumen del contenido incluido en la página 14
ASSEMBLY Assembling the J-handle Assembling the spray guard and trimmer head Superauto II • Clip the loop handle onto the shaft. Note that the • Fit the guard (A) intended loop handle must be for use with the trimmer fitted between the arrows head. Hook the guard onto on the shaft. the shaft fitting and secure it with the bolt (L). • Slide the spacer into the • Fit the drive disc (B) on the slot in the loop handle. output axle. • Fit the nut, knob and • Turn the blade axle until bolt. Do not ove
Resumen del contenido incluido en la página 15
ASSEMBLY Fitting the combination guard, grass Assembling other guards and cutting blade and grass knife equipment • Hook the guard (A) onto • Fit the guard (A) the bracket on the shaft intended for use with and secure with 1 bolt. the trimmer head. Hook NOTE! Use the the guard onto the shaft recommended blade guard. fitting and secure it with G “See Technical data“. the bolt (L). F • Fit the drive disc (B) on E the output axle. • Fit the disc drive (B) on the output axle. D • Turn the blade axle
Resumen del contenido incluido en la página 16
FUEL HANDLING Mixture Fuel mixture • Always mix petrol and oil in a clean container intended for NOTE! petrol. The machine is fitted with a two-stroke engine and must always be run on a mixture of petrol and two-stroke oil. It is • Always start by filling half the quantity of petrol required. important to measure the quantity of oil accurately, to ensure Then add the entire oil quantity. Mix (shake) the fuel the correct mixture ratio. Small discrepancies in the amount of mixture. Fill the remain
Resumen del contenido incluido en la página 17
START AND STOP Cold engine Control before starting IGNITION: For reasons of safety follow Set the stop switch to the these recommendations! start position. • Check the blade to ensure CHOKE: that no cracks have formed Set the choke control in the at the bottom of the teeth choke position. or by the centre hole. The AIR PURGE: most common reason why Press the air purge cracks are formed is that diaphragm repeatedly until sharp corners have been fuel begins to fill the formed at the bottom of diap
Resumen del contenido incluido en la página 18
MAINTENANCE Basic setting Carburettor • The carburettor is set to its basic setting when test run at the Your Husqvarna product has been designed and factory. The basic setting is richer than the optimal setting manufactured to specifications that reduce harmful and should be kept during the machine‘s first working emissions. hours. Thereafter the carburettor should be finely adjusted. After your unit has been run 8-10 tanks of fuel the engine Fine adjustment should be carried out by a skilled h
Resumen del contenido incluido en la página 19
MAINTENANCE Final setting of the idling speed T Correctly adjusted carburettor Adjust the idling speed with A correctly adjusted carburettor means that the machine the screw T, if it is necessary accelerates without hesitation and the machine 4-cycles a to readjust. First turn the little at max speed. Furthermore, the cutting attachment idle speed adjusting screw T must not rotate/move at idling. A too lean adjusted low clockwise until the cutting speed needle L may cause starting difficulties a
Resumen del contenido incluido en la página 20
MAINTENANCE Muffler Cooling system NOTE! To maintain as low opera- Some mufflers are fitted with a catalytic converter. See ting temperature as possible “Technical data” to see whether your machine is fitted with a the engine is equipped with catalytic converter. a cooling system. 4 The cooling system consists The muffler is designed to of: 3 dampen the noise level and 1.An air intake on the 2 to direct the exhaust fumes starter unit. away from the user. The 2.Cooling fins on the exhaust fumes a
