Manual de instrucciones de Flymo CONTOUR 500 XT

Resumen del contenido incluido en la página 1

Contour 500 XT
Original Instructions
For all customer enquiries or for replacement parts, contact:-

01325 300303
www.flymo.com
customer.services@husqvarna.co.uk
IMPORTANT INFORMATION
Read before use
& retain for future reference

Resumen del contenido incluido en la página 2

360º Carton Contents Switch Handle Steady Handle Tube Trimmer Head Electric Cable with Instruction moulded on plug Manual Safety- Guard Wheel Plant and Tree Guard IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd. Customer Service Department direct Telephone : 01325 300303 Fax : 01325 302530 Safety If not used properly this trimmer can be dangerous! This trimmer can cause serious injury t

Resumen del contenido incluido en la página 3

7. Do not pull cable around sharp objects. other than grass. 8. Always switch off at the mains before disconnecting 8. Never operate the trimmer with damaged guards or any plug, cable connector or extension cable. without guards in place. 9. Never pull on the cable to disconnect any of the plugs. 9. Never fit metal cutting elements. 10.Switch off, remove plug from mains and examine electric 10.Keep hands and feet away from the cutting means at supply cable for damage or ageing before winding cab

Resumen del contenido incluido en la página 4

Assembly Instructions cont’ B1 B2 Wheel Assembly (B1) & (B2) 1. Fix the 2 halves of the wheel together as illustrated in fig B1. 2. Attach the wheel to the trimmer making sure that it is located into the groove on the trimmer head (B2). 3. Clip the wheel together on the other side, making sure it is secure. 4. The wheel should turn freely. Safety Guard Assembly (C1) & (C2) C1 C2 1. Locate the safety guard over the cutting head. Ensure the nylon line is fed through the hole in the safety guard a

Resumen del contenido incluido en la página 5

How to use  WARNING H J1  The use of eye protection is recommended. Do not lean over the trimmer whilst trimming or edging, objects may be thrown by the cutting line. Do not allow cutting head to rest on the ground. Do not overload your trimmer. Overloading can be avoided by making sure the motor speed does not drop unduly. DISCONNECT FROM THE MAINS ELECTRICITY SUPPLY BEFORE ATTEMPTING ANY MAINTE- NANCE OR ADJUSTMENT.  BEFORE USE  Make sure that both lines are fed out.  Make sure motor

Resumen del contenido incluido en la página 6

Manual line feed To manually feed the nylon line (Q) Q 1. If required line can be fed out manually. 2. To operate, press and release manual line feed button, whilst gently pulling on one of the lines until the line reaches the line cutter. 3. When the required amount of line is fed out, gently pull on the second line (there is no need to press the man- ual line feed button again). 4. If the line extends past the line cutter, too much line manual line has been fed out. feed button 5. If too much

Resumen del contenido incluido en la página 7

Maintenance V  WARNING Disconnect from the mains electricity supply, be- fore attempting any maintenance or adjustment. Cutting head continues to rotate after the trimmer has been switched off. Keep fingers and hands clear of the line cutter on leading edge of guard. W Caring for your product After you have finished using your product follow the pro- cedure below: AVOID ACCIDENTAL STARTING. REMOVE PLUG FROM MAINS AND KEEP FEET AWAY FROM THE SWITCH LEVER WHEN: CLEANING AROUND THE IN- SIDE OF T

Resumen del contenido incluido en la página 8

Fault Finding Chart WARNING Disconnect from the mains electricity supply before attempting any maintenance or adjustment. FAULT CHECK ACTION Is the automatic line feed work- Manually feed out line. LINE NOT FEEDING No SEE “MANUAL LINE FEED” ing? OR Is the line fed out and visible? Remove cap and spool, free line LINE TOO SHORT No Has line been removed from and re-fit spool and cap. SEE OR cleat? “CUTTING HEAD” TRIMMER VIBRATES The line may be jammed on the spool. Rewind line to remove Is the

Resumen del contenido incluido en la página 9

EC Declaration of Conformity Husqvarna UK Ltd., Aycliffe Industrial Park Newton Aycliffe, Co. Durham, DL5 6UP, England Declare under our sole responsibility that the product(s); Category............................Electric Lawn Trimmer Type(s) ............................CTXT25 Identification of Series.......See Product Rating Label Year of Construction..........See Product Rating Label Conforms to the essential requirements & provisions of the following EC Directives: 98/37/EC (until 31.12.09)