Resumen del contenido incluido en la página 1
COMMERCIAL
PRODUCTS
DIVISION
Commercial Climber Owner's Manual
C764
COMMERCIAL PRODUCTS DIVISION
Resumen del contenido incluido en la página 2
COMMERCIAL PRODUCTS DIVISION IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be taken, including the following: • To ensure your safety and to protect the unit, read all the instructions before assembling and using the climber. To ensure the proper use and safety of the C764, make sure that all users read this manual. Please make this manual a part of your club’s training program. Remind the club users that before beginning any fitness program,
Resumen del contenido incluido en la página 3
COMMERCIAL PRODUCTS DIVISION IMPORTANT SAFETY INSTRUCTIONS Wear proper exercise clothing and shoes during a workout—no loose clothing. Tie long hair back. Do not rock the unit. Do not stand on the display console or casing. Do not overexert yourself or work to exhaustion. If you feel any pain or abnormal symptoms, stop your workout immediately and consult your physician. SAFETY APPROVAL When identified with the ETL-c logo, the climber has been tested and conforms to the requirements of CAN
Resumen del contenido incluido en la página 4
COMMERCIAL PRODUCTS DIVISION Table of Contents Important Safety Instructions ............................................................. 2 Safety Approval .......................................................................... 3 Grounding Instructions ............................................................... 3 Radio Frequency Interference (RFI) ........................................... 6 European Applications ............................................................... 6 Obtainin
Resumen del contenido incluido en la página 5
COMMERCIAL PRODUCTS DIVISION C764 Courses ....................................................................................... 34 Using Manual Mode and the QuickStart Key.............................. 34 Preprogrammed Courses ........................................................... 34 Changing the Interval Course Profile On the C764 .................... 35 Using the Random Course on the C764 Climber ....................... 35 Maintenance ....................................................
Resumen del contenido incluido en la página 6
COMMERCIAL PRODUCTS DIVISION RADIO FREQUENCY INTERFERENCE (RFI) Federal Communications Commission Part 15 Federal Communications Commission Part 15 Federal Communications Commission Part 15 Federal Communications Commission Part 15 Federal Communications Commission Part 15 The climber has been tested and found to comply with: The IEC EMC Directive (international electromagnetic compatibility certifica- tion) The limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
Resumen del contenido incluido en la página 7
COMMERCIAL PRODUCTS DIVISION Do not attempt to service the climber yourself except for the maintenance tasks described in this manual. The climber does not contain any user-serviceable parts. For information about product operation or service, visit the Precor Web Site at www.precor.com or contact an authorized Precor Commercial Products Customer Support Representative at 1-888-665-4404. To help customer support personnel expedite your call, have your serial number available. The serial number c
Resumen del contenido incluido en la página 8
COMMERCIAL PRODUCTS DIVISION page 8
Resumen del contenido incluido en la página 9
COMMERCIAL PRODUCTS DIVISION Unpacking the C764 Climber Thank you for purchasing the Precor C764 climber. Built to the exacting standards of the health club environment, the C764 is intended for commercial use and can withstand the rigors of daily club use with little maintenance. Important: Before using the climber, we urge you to familiarize yourself and your staff with the entire Owner’s Manual. Understanding this manual will help you and your customers use the C764 safely and successfully. Y
Resumen del contenido incluido en la página 10
COMMERCIAL PRODUCTS DIVISION Diagram 2 Hardware kit J AC F H BD G (B) E HARDWARE KIT Carefully unpack the parts from the shipping container. Open the hardware kit and make sure that you have the following items: ❏ (A) four hex head screws—for installing the upper column support ❏ (B) six split lock washers—attach to screws on upper column support and to the handrail clamp screws ❏ (C) three screws—for installing electronic console display ❏ (D) three split lock washers—attach to bolts on electro
Resumen del contenido incluido en la página 11
COMMERCIAL PRODUCTS DIVISION Setting Up the C764 Climber You do not need any special knowledge or experience to set up a C764 climber, however you will need assistance. Ask for one or more assistants to help you assemble the climber. INSTALLATION REQUIREMENTS Follow the installation requirements below when installing the climber. If you do not install the climber according to the following guidelines, you could void the Precor limited warranty. Set up the C764 climber on a solid, flat surface.
Resumen del contenido incluido en la página 12
COMMERCIAL PRODUCTS DIVISION 2. Remove the climber from the shipping pallet. Be sure to remove the lag bolt that holds the climber on the pallet. The lag bolt is located under the right foot pedal next to the casing. Ask for assistance to lift the climber off the shipping pallet. 3. Make sure that the climber is unplugged and turned OFF. Do not assemble the C764 climber if it is plugged into a power outlet. 4. Take the following steps to secure the upper column to the base frame assembly. Refer
Resumen del contenido incluido en la página 13
COMMERCIAL PRODUCTS DIVISION Remove the handrail Diagram 4 clamp. Handrail clamp Nylock nuts inside upper column Upper column ® 5. Remove the handrail clamp from the upper column. Diagram 4. Nylock nuts inside the upper column secure the two handrail clamp screws. Hold the two screws with a 3/16-inch Allen wrench and use a 1/2-inch box end wrench to loosen the nuts. Carefully place your hand inside the upper column to catch the nuts as they become loose. Set the fasteners and clamp aside for use
Resumen del contenido incluido en la página 14
COMMERCIAL PRODUCTS DIVISION Diagram 6 Attach the upper portion 1 of the handrails to the handrail clamp. Handrail Foam grip Handrail clamp Rotate handrail clamp. Secure handrails in clamp. 2 3 8. Attach the upper portion of the handrails to the handrail clamp (removed in step 5). Position the handrails as shown in Diagram 6, #1. Slide the handrails into the clamp. 9. Rotate the handrail clamp so that it aligns with the mounting holes on the upper column. Diagram 6, #2. 10. Secure the handrails
Resumen del contenido incluido en la página 15
COMMERCIAL PRODUCTS DIVISION Diagram 8 Secure the handlebar bracket and handrail clamp to the upper column. Vertical handlebar Handrail Handlebar bracket Upper column Heart rate cable Handrail clamp Reinsert screws and washers removed in step 5. 13. Align the holes in the handlebar bracket and the holes in the handrail clamp with the two holes in the upper column. Diagram 8. Insert the two screws with washers that were removed in step 5. 14. Replace the nylon-end nuts (removed in step 5) onto
Resumen del contenido incluido en la página 16
COMMERCIAL PRODUCTS DIVISION Diagram 9 Attach the display 2 console. Cables found in back of the display console. 1 Route the ribbon cable through the upper column. Connect the heart rate cable. 3 16. Attach the display console by taking the following steps: a. Gently unwrap the cables found in the back of the display console. Diagram 9, #1. b. Hold the display console above the upper column and route the ribbon cable down through the column and out its base. Diagram 9, #2. c. Carefully lower th
Resumen del contenido incluido en la página 17
COMMERCIAL PRODUCTS DIVISION Diagram 10 Secure the display console to the upper column. Display console Upper column Screws (C), lock washers (D), and washers (E) Make sure that the base of console is parallel to the top of the handrail clamp. d. Remove three screws (C), lock washers (D) and washers (E) from the Hardware kit. Place the lock washers and then the washers onto the screws. Align the mounting holes on the display with the upper column and insert the screws so that the washers are aga
Resumen del contenido incluido en la página 18
COMMERCIAL PRODUCTS DIVISION Diagram 11 Connect the ribbon cable 1 2 and complete the C764 assembly. Pull ribbon cable through upper column. Tabs on receptacle Connect the ribbon cable. 3 4 Push excess cable into upper column. Lower the rubber boot over the base mounting plate. 17. Connect the ribbon cable. Return to the upper column where it is mounted to the base assembly and take the following steps: a. Pull the ribbon cable out of the upper column. Diagram 11, #1. b. Open the tabs on the rib
Resumen del contenido incluido en la página 19
COMMERCIAL PRODUCTS DIVISION Programmable Options on the C764 Climber These next few pages provide information that lets you customize the C764 for your Club. It is not information that your customer needs to see. This section covers the following information about how to: select the units of measure set maximum workout and pause times customize a course Note: If your customers are interested in the learning more about the C764, you may wish to direct them to the manual available on Precor
Resumen del contenido incluido en la página 20
COMMERCIAL PRODUCTS DIVISION Diagram12 R C764 www.precor.com WORK LEVEL 1 2 3 4 5 6 7 8 9 0 1 TIME FLOORS CLIMBED FLOORS PER MINUTE RATE PER MINUTE Meters Feet Steps 46 150 225 43 140 210 40 130 195 37 120 180 34 110 165 30 100 150 27 90 135 24 80 120 21 70 105 20 65 98 SEGMENT TIME LEFT CALORIES STEPS PER MINUTE 18 60 90 17 55 83 WATTS CALORIES PER MINUTE FEET PER MINUTE 15 50 75 14 45 68 METS HORIZONTAL DISTANCE METERS PER MINUTE 12 40 60 11 35 53 OFF OFF OFF 9 30 45 1 Step = 8 inches Horizont
