Resumen del contenido incluido en la página 1
Preparation Basic Operation Advanced Operation Useful Information
2.4GHz Digital Cordless Phone
Operating Instructions
Model No. KX-TG2239B
Pulse-or-tone dialing capability
Caller ID Compatible
PLEASE READ BEFORE USE AND SAVE.
Charge the battery for about 15 hours before initial use.
Panasonic World Wide Web address: http://www.panasonic.com
for customers in the USA or Puerto Rico
Resumen del contenido incluido en la página 2
Thank you for purchasing your new Panasonic cordless telephone. Please read IMPORTANT SAFETY INSTRUCTIONS on page 65 before use. Read and understand all instructions. Caller ID and Call Waiting Service and Voice Mail Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller’s name and phone number. Call Waiting Caller ID, which displays a second caller’s name and phone number while the user is on the phone line with the first caller
Resumen del contenido incluido en la página 3
Resumen del contenido incluido en la página 4
Contents Preparation Location of Controls ...................................................................... 6 Display............................................................................................. 8 Settings ...........................................................................................11 Connections ..................................................................................11 Installing the Battery in the Handset ............................................
Resumen del contenido incluido en la página 5
Preparation Cordless Telephone Basic Operation Advanced Operation Answering System Useful Information Intercom ..........................................................................................47 Transferring a Call Using the Intercom .........................................48 Voice Mail Service..........................................................................49 Storing a Voice Mail Access Number ...........................................50 Setting the Voice Mail (VM) Tone Dete
Resumen del contenido incluido en la página 6
Resumen del contenido incluido en la página 7
Preparation Handset Back side Antenna Speaker Receiver (p. 24) (p. 21) Display (p. 8) (MUTE) Button (p. 53) (VOICEÒENHANCER) Button (p. 25) (FUNCTION) Button (OFF) Button (p. 16, 34, 40, 49) (p. 21, 30, 40, 47) Headset Jack (p. 58) Navigator Key ( , , , ) (p. 16, 22, 24, 30, 40, 49) (TALK) Button (p. 21, 28, 32) (HOLD/INTERCOM/CLEAR) (Speakerphone) Button (p. 24, 36, 40, 47) Button (p. 22, 28, 32) (REDIAL/PAUSE) Button (TONE) Button (p. 53) (p. 23, 54) Mic
Resumen del contenido incluido en la página 8
Display The handset shows you instructions and information on the display. These display prompts are shown below. “V.E.” (Voice Enhancer) on the display means V.E. that the V.E. mode is turned on (p. 25). The battery needs to be charged. Place the V.E. handset on the base unit to charge the battery Recharge (p. 13). The display shows that you have received new V.E. calls (p. 30). To check the new calls, lift the Received calls handset and press Ö or Ñ. (Handset on the base unit) The display sh
Resumen del contenido incluido en la página 9
Preparation When a call is received, the display shows the caller’s name and number after the first ring. ROBINSON,TINA 1-000-222-3333 During a conversation, the display shows the Talk V.E. length of the call (ex. 1 hour, 6 minutes and 35 01-06-35 seconds). The battery strength is also displayed (p. 13). The handset has lost communication with the No link to base base unit. Place the handset on the base unit Place on cradle and try again. and try again. SMITH,JACK This is a name from the Caller
Resumen del contenido incluido en la página 10
Resumen del contenido incluido en la página 11
Resumen del contenido incluido en la página 12
Resumen del contenido incluido en la página 13
Preparation Battery strength You can check the battery strength on the handset display. The battery strength is as shown in the chart below. Display prompt Battery strength Fully charged Medium Low (flashing) Needs to be recharged. Recharge Recharge the battery when: V.E. —“Recharge” is displayed on the handset, Recharge —“ ” flashes on the display, or —the handset beeps intermittently while it is in use. •If you DO NOT recharge the handset battery for more than 15 minutes, the display will conti
Resumen del contenido incluido en la página 14
Resumen del contenido incluido en la página 15
Preparation Line Mode If the line is connected to a low voltage system such as a PBX, set to “B”. Your phone comes from the factory set to “A”. Make sure the unit is not being used and the handset is lifted off the base unit. Press (FUNCTION). -------------- 1 HSave directory Ringer volume Scroll to “Program” by pressing Ö or Ñ. Ringer tone 2 HProgram -------------- Pressá. -------------- 3 HSet flash time Save VM acces# Scroll to “Set line mode” by pressing VM tone detect 4 Ö or Ñ. HSet line m
Resumen del contenido incluido en la página 16
Programmable Functions You can program the following function items using the handset near the base unit. The display shows the programming instructions. See the corresponding pages for function details. Make sure the unit is not being used and the handset is lifted off the base unit. Press (FUNCTION). * -------------- HSave directory To store an item in the directory (p. 40). Ringer volume To select the ringer volume (p. 18). Ringer tone To select the ringer tone (p. 19). Progra
Resumen del contenido incluido en la página 17
Preparation Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing or . If you want to use this feature, turn the feature ON by programming. Your phone comes from the factory set to OFF. Make sure the unit is not being used and the handset is lifted off the base unit. Press (FUNCTION). 1 Scroll to “Program” by pressing Ö or Ñ. Ringer tone 2 HProgram -------------- Pressá. 3 Scroll to “Auto talk” by pressing Ö or Set dial mode
Resumen del contenido incluido en la página 18
Programmable Functions Ringer Volume You can program the handset or base unit ringer volume to HIGH, LOW or OFF. If set to OFF, the handset or base unit will not ring. Your phone comes from the factory set to HIGH. Make sure the unit is not being used and the handset is lifted off the base unit. With the handset Press (FUNCTION). 1 Scroll to “Ringer volume” by Save directory 2 pressing Ö or Ñ. HRinger volume Ringer tone Press á. Ringer 3 HIGH Low ❚❚❚❚❚❚ High GF H=Save Select the desired volume b
Resumen del contenido incluido en la página 19
Preparation Ringer Tone You can select the handset or the base unit ringer tone out of 6 patterns. When an incoming call is being received, the unit rings in the selected tone. Your phone comes from the factory set to 1. Make sure the unit is not being used and the handset is lifted off the base unit. With the handset Press (FUNCTION). 1 Scroll to “Ringer tone” by pressingÖ or Ringer volume 2 Ñ. HRinger tone Program Press á. Ringer tone 3 :1 •The current setting is displayed. GF H=Save Select t
Resumen del contenido incluido en la página 20
Programmable Functions LCD Contrast You can program the handset LCD contrast (5 levels). To make the handset display clearer, set to high level. Your phone comes from the factory set to level 3. Make sure the unit is not being used and the handset is lifted off the base unit. Press (FUNCTION). 1 Scroll to “Program” by pressing Ö or Ñ. Ringer tone 2 HProgram -------------- Press á. 3 Scroll to “LCD contrast” by pressing Ö CallerID edit 4 or Ñ. HLCD contrast -------------- Pressá. LCD contrast 5 L
