Resumen del contenido incluido en la página 1
User’s manual
CL2909 Speakerphone
with caller ID/call
waiting
LOWER
Resumen del contenido incluido en la página 2
Congratulations on purchasing your new AT&T product. Before using this AT&T product, please read the Important safety information on pages 33-34 of this manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model #: CL2909 Type: Speakerphone with caller ID
Resumen del contenido incluido en la página 3
Make sure to install four See page 4 for easy AA alkaline batteries instructions. STOP! (not included). If you subscribe to high-speed Internet service (digital subscriber line - DSL) through your telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack (see page 5). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. Your product may b
Resumen del contenido incluido en la página 4
Parts checklist Check to make sure your telephone package includes the following items. LOWER Telephone base with mounting Handset Coiled handset cord bracket and directory card attached Short telephone line cord Long telephone line cord LOWER LOWER User’s manual Quick start guide
Resumen del contenido incluido en la página 5
User’s manual CL2909 speakerphone with caller ID/call LOWER waiting Table of contents Redial .......................................................15 Getting started Chain dialing ........................................16 Product overview ....................................1 Flash/call waiting ..............................17 Quick reference guide ..........................2 Hold ..........................................................17 Base lights .......................................
Resumen del contenido incluido en la página 6
Table of contents Review directory entries ................24 Dial a directory number .................24 Delete a directory entry .................24 Caller ID operation Caller ID operation .................................25 Caller ID information .......................25 Information about call history ....26 Caller ID .................................................27 Review call history ............................27 Remove call records ........................28 Display dial ..............
Resumen del contenido incluido en la página 7
Getting started Product overview This AT&T CL2909 speakerphone with caller ID/call waiting can be used flat on a tabletop or mounted on a wall and does not require AC power for operation. The CL2909 features a speakerphone for hands-free use and a data port that allows the use of another device such as a modem, fax machine, or answering system with the same wall jack. The CL2909 also features a 14-number memory for fast dialing and has a directory that can store up to 25 additional number
Resumen del contenido incluido en la página 8
Getting started Quick reference guide CALL LIST REMOVE Press to review call history Press to delete the displayed records (page 27) or scroll entry (page 21, 24, 28). through options when in the When the telephone is idle, feature menu. press and hold to remove all DISPLAY DIAL call history entries (page 28). Press to dial the displayed number (page 28). OPTIONS Press to display the menu CLEAR (page 10). Press to return to idle mode. When in the menu, press to LOWER save your setting an
Resumen del contenido incluido en la página 9
Getting started Quick reference guide Base lights CALL INFO SPEAKER • On when the line is in use. On when speakerphone • Flashes slowly when a call is on hold. is in use. -OR- Flashes slowly when the connected LOWER telephone line cord is not plugged into a MUTE wall jack. -OR- On when speakerphone Flashes slowly when a telephone on the or handset microphone same line is in use. is muted. • Flashes quickly when there is an incoming call. Screen icons ERR There is an error in the calle
Resumen del contenido incluido en la página 10
Getting started Battery installation Before using the telephone, you should install four good AA alkaline batteries (not included) to provide memory backup and enable the use of some features. The four AA batteries are required for the following features to work: speakerphone, hold, mute, flash, caller ID features, screen display, feature options menu, directory, clock, and the CALL INFO light. If you unplug the telephone from the wall jack, or you lose telephone service for over 10 minute
Resumen del contenido incluido en la página 11
Getting started Installation options The telephone base comes with the mounting bracket already installed for tabletop use. If you want to mount your telephone on a wall, use the provided wall bracket to connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronic retailers. You might need a professional to install the mounting plate. If you subscribe to high-speed Internet service (di
Resumen del contenido incluido en la página 12
Getting started 4. Connect the handset to the telephone. Plug the coiled handset cord into the handset jack on the left side of the telephone base. Plug the other end of the coiled cord into the handset, then hang up. LOWER 5. Check for dial tone. Lift the handset and listen for a dial tone. If you cannot hear a dial tone, press VOLUME . If you still do not hear a dial tone, see the Troubleshooting section on pages 30-31 of this manual. Your telephone will work immediately after installation
Resumen del contenido incluido en la página 13
Getting started Installation options Wall installation 1. Reposition the mounting bracket for wall use. Press on the mounting bracket as shown in figure a to release the bracket. Rotate the bracket as shown in figure b so that the larger end is toward the bottom of the telephone. Lock the bracket by positioning it as shown in figure c, and pressing it (as shown by arrow) into the telephone base until it locks in place. figure a figure b figure c 2. Connect the short telephone line cord to th
Resumen del contenido incluido en la página 14
Getting started 3. Reverse the handset tab. This tab holds the handset when you hang up. Hold down the switchhook, and slide the handset tab up and out of its slot. Turn the tab so that the end with the hook is up. Then insert the handset tab back into its slot. Switchhook Handset tab 4. Connect the short telephone line cord to a wall jack and mount the telephone on the studs on the mounting plate. Make sure the short telephone line cord snaps firmly into place. Place the telephone on the wa
Resumen del contenido incluido en la página 15
Getting started Data port If you want to connect another device (such as a modem or fax machine) to the wall jack, use the jack on the telephone labeled DATA. A call picked up at another extension connected with the same line may interrupt a fax, modem or message transmission. Data port TEL DATA 9
Resumen del contenido incluido en la página 16
Telephone settings Telephone settings The screen will display prompts to help you set up the telephone when you first install it. You can always get back to these setup screens by pressing OPTIONS. NOTE: You can exit feature setup at any time by pressing CLEAR or by lifting the handset when LOWER there is no incoming call. For complete feature setup, see Set remaining features on page 13. Language selection You can select ENGLISH, ESPANOL (Spanish) or FRANCAIS (French) as the language in
Resumen del contenido incluido en la página 17
Telephone settings Telephone settings Set home area code You must program your area code, so your telephone can properly recognize and dial calls. For calls within your area code You dial Enter in step 2 7 digits Your area code (telephone number, no area code) 10 digits 0 0 0 (area code + telephone number) -OR- 11 digits (1 + area code + telephone number) 1. Press OPTIONS repeatedly until the screen LOWER displays: AM 12:00 1-01 HAC-_ _ _ HOME AREA CODE? 2. Use the dial pad keys (0-9) to ente
Resumen del contenido incluido en la página 18
Telephone settings Telephone settings Set local area code You can program up to four local area codes. For calls outside your area For: You dial: Enter in step 2: All calls outside 11 digits (1 + area code No local area your area code + telephone number code Some calls 10 digits Area codes that outside your do not require (area code + telephone area code a 1 number) If you dial 10 digits (area code + telephone number) for calls within your own area code, include your area code as a local
Resumen del contenido incluido en la página 19
Telephone settings Telephone settings Set time and date 1. Press OPTIONS repeatedly until the screen displays: AM 12:00 1-01 SET CLOCK LOWER 2. Use the dial pad keys (0-9) to change the blinking digits. • Press CALL LIST to move to the previous digit or CALL LIST to move to the next digit. • Press # to select between AM and PM. 3. When the correct time and date (month-year) are shown, press OPTIONS to save the new setting and move to the next option. Set remaining features You can cust
Resumen del contenido incluido en la página 20
Telephone settings Telephone settings Feature summary (Default settings indicated by *) Feature/options Function SET CLOCK Set the date and time. Use # to select between AM and PM. Use AM CALL LIST or CALL LIST to choose a digit to edit, then use the dial 12:00 1-01* pad keys to change the digits. WHICH LANGUAGE? Choose whether the display appears is English, Spanish, or French. ENGLISH* ESPANOL FRANCAIS SET CONTRAST Adjust screen brightness to a comfortable level, from 1 (light) to 4 (da
