Manual de instrucciones de Uniden FP098

Resumen del contenido incluido en la página 1

FP098
Adjustable Volume
Controls
8 One Touch
Speed-dial
OWNER’S
Memories
MANUAL
Mute Button

Resumen del contenido incluido en la página 2

CONTENTS Contents and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Your FP098 Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Back-up Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Location and Controls & Connections . . . . . . . . . . . . .

Resumen del contenido incluido en la página 3

1 Telephone YOUR FP098 PACKAGE Your FP098 Package will contain: FP098 2 screws Adjustable Volume Controls 8 One Touch Speed-dial OWNERS Memories MANUAL Mute Button This Manual 1 - Telephone line -or- 1 - Telephone line cord (Australia) cord (New Zealand) SET UP Connecting Line Cords Plug one end of the supplied telephone cord into the telephone wall jack. Then plug the other end into the telephone base line jack. Plug the handset cord into the side of the base. Telephone Socket New Zealand or HI

Resumen del contenido incluido en la página 4

LOCATION OF CONTROLS & CONNECTIONS Handset Base Unit Handset Hookswitch M1 button M2 button In use indicator M3 button M4 button Handset Retainer Tab M5 button M6 button M7 button M8 button Flash/Transfer button Mute button Redial button Store button Visual ringer Rear of Base Unit HI LO VOLUME RINGER Handset volume control Ringer HI/LO switch LINE jack 3 3

Resumen del contenido incluido en la página 5

INSTALLATION WALL MOUNTING You can mount your phone directly on a wall. Before mounting your phone, consider the following: • Select a location away from electrical cables, pipes or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Make sure the wall material is capable of supporting the weight of the 5mm Telephone. • Use the screws (supplied) with anchoring devices suitable for the wall material where the telephone is placed. 85mm 1. I

Resumen del contenido incluido en la página 6

OPERATION Redial If you need to call the last number dialed, simply pick up the handset and press . The telephone will automatically redial the last number dialed. If any button is Flash - Call Waiting pressed before , the last If the Call Waiting tone sounds while you are on a call - number will New Zealand: Press to switch between callers. not redial. Australia: Press then to switch between callers. Centrex - Transfer If you subscribe to the Telecom Centrex service, flash may be used to

Resumen del contenido incluido en la página 7

SPEED DIAL NUMBERS Eight speed dial numbers can be programmed into the memory of your M1 M8 telephone ( - ). Each memory location can store a maximum of 16 digits. Storing One-Touch Speed Dial Numbers 1. Pick up the handset. store 2. Press . 3. Enter phone number using the keypad (up to 16 digits). store 4. Press . 5. Press the speed dial location you wish to store the number to M1 M8 - . 6. Hang up the handset. Dialing Speed Dial Numbers To dial a stored memory num

Resumen del contenido incluido en la página 8

WARRANTY One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited ELEMENT OF WARRANTY: Uniden warrants to the original retail owner for the duration of this warranty, its FP098 (herein after referred to as the Product), to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to