Resumen del contenido incluido en la página 1
29086
Caller ID with Call Waiting
User's Guide
NEW
3:27 PM 1/05 CALL W A ITING CALL# 4
CALL WAITING DIAL BACK
NEW CALL/VOICE MAIL
DELETE OPTIONS
Resumen del contenido incluido en la página 2
FCC REGISTRATION INFORMATION Your telephone equipment is registered with the Federal Communications Commission and is in compliance with parts 15 and 68, FCC Rules and Regulations. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the FCC Registration number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining t
Resumen del contenido incluido en la página 3
INTERFERENCE INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection again
Resumen del contenido incluido en la página 4
FEATURES • Displays caller’s name and number as well as time and • Dual review buttons allow forward or backward review of date of the call. call records. • Displays caller’s name and number of the call waiting. • Electronic display contrast control. • Three-line display. • Delete button allows individual or collective deletion of call records. • Three language display - English, French and Spanish. • Programmable area code. • 15 dot matrix characters used for caller Name and Number service. • N
Resumen del contenido incluido en la página 5
TABLE OF CONTENTS FCC REGISTRATION INFORMATION ................... 2 OPERATION ........................................ 16 INTERFERENCE INFORMATION ........................... 3 RECEIVING CALLS ............................................ 16 FEATURES ............................................ 4 CALL WAITING DISPLAY ................................... 17 BEFORE YOU BEGIN .............................. 6 REVIEWING CALL RECORDS ............................... 18 DELETING CALLS ...................
Resumen del contenido incluido en la página 6
BEFORE YOU BEGIN PARTS CHECKLIST Make sure your package includes the following items NEW CALL# 3:27 PM 1/05 CALL W A ITING 4 CALL WAITING DIAL BACK NEW CALL/VOICE MAIL DELETE OPTIONS Caller ID unit AC power supply Telephone line cord 6
Resumen del contenido incluido en la página 7
INTRODUCTION TO CID SERVICE Congratulations on your purchase of this Caller ID unit. This device allows you to take advantage of the Caller Identification Delivery with Call Waiting service. • This unit can be used to screen unwanted calls, eliminate harassment from annoying calls, or to get prepared before answering a call. • When used with Caller ID service, after the first ring, this unit displays the name (if available) and telephone number of the person calling, along with the date and time
Resumen del contenido incluido en la página 8
INSTALLATION IMPORTANT INSTALLATION INFORMATION INSTALLING THE BATTERIES • Never install telephone wiring during a Your Caller ID uses 3 AAA-size alkaline batteries lightning storm. for receiving and storing Caller ID records. • Never touch uninsulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. IMPORTANT: You have approximately 60 seconds to replace the batteries before the call • Use caution when installing or modifying records are lo
Resumen del contenido incluido en la página 9
1. If the telephone line cord or a phone is NOTE: If the low battery icon appears in connected to the unit, disconnect them from the display, you need to replace the batteries. It is important that you replace the batteries as soon as the unit. possible in order to maintain Caller ID operation. 2. Use a screwdriver or other flat tool to open the battery compartment door. IMPORTANT: If you’re not going to use the unit for more than 30 days, remove the batteries 3. Insert 3 AAA-size alkaline batt
Resumen del contenido incluido en la página 10
USING THE AC POWER SUPPLY CONNECTING A TELEPHONE You must use the AC power 1. To install this unit, disconnect your telephone supply (included) to operate your by removing the plug at the end of its line cord Caller ID unit. The unit is designed from the existing telephone wall jack. to retain stored records after you 2. Plug the line cord from your telephone into the disconnect the adapter or during a jack marked PHONE on this unit. power failure. 3. Plug one end of the line cord supplied with
Resumen del contenido incluido en la página 11
4. Plug the remaining end of the line cord 6. If this unit is connected with an answering connected to this unit’s LINE jack into the machine, please refer to the following drawing telephone wall jack. and set your answering machine to answer the phone for at least 2 rings. This will assure that 5. Plug the supplied AC power supply into the this unit will receive the CID information existing wall outlet and the adapter tip to the correctly. jack at the rear side of unit. 11
Resumen del contenido incluido en la página 12
OPTIONS MENU If there is a transparent overlay label covering the LOCAL AREA CODE (default ---) display, remove it prior to use. 10 DIGIT ACs : (default --- --- ---) After applying power for the first time, the EXIT "CALLS" summary screen appears. • You have 10 seconds following any key press NOTE: Proceed immediately to change any of the before the phone will automatically return to following factory preset settings as required. the "CALLS" summary screen. 1. To enter the Options menu, press th
Resumen del contenido incluido en la página 13
SETTING THE CID LANGUAGE SETTING THE LCD CONTRAST This adjustment changes the Caller ID prompts to This adjustment allows optimization of the be displayed in English, French, or Spanish. contrast and viewing angle of the display. 1. To enter the Options menu, press the OPTIONS 1. To enter the Options menu, press the OPTIONS button. OPTIONS MENU < > appears. button. OPTIONS MENU < >appears. 2. Press the left or right arrow button until CID 2. Press the left or right arrow button until LCD LANGUAG
Resumen del contenido incluido en la página 14
5. When the desired digit is flashing, press the SETTING THE LOCAL AREA CODE right arrow button to advance to the next digit. The Caller ID unit uses the programmed area 6. Repeat steps 4 and 5 until all the digits for your code to determine the number format to display when a valid Caller ID signal is received and is area code are correct. also used for the Dial Back feature. 7. Press OPTIONS again to store the local area code and return to the LOCAL AREA CODE 1. To enter the Options menu, pres
Resumen del contenido incluido en la página 15
5. When the desired digit is flashing, press the SETTING THE 10-DIGIT REGIONAL right arrow button to advance to the next digit. AREA CODES 6. Repeat steps 4 and 5 until all the digits for your Depending on your telephone company and your regional area code are correct. location, it may be required that you dial a 7. Press OPTIONS again to store the regional 10-digit number (area code + local number) for area code and return to the 10 DIGIT AC's some calls. You can store up to six display. 10-dig
Resumen del contenido incluido en la página 16
OPERATION • The red NEW CALL indicator comes on, RECEIVING CALLS confirming new calls have been received. This unit has a built-in real time clock that will • After 20 seconds without activity, the display keep the current time and date accurately. The will change to the "CALLS" summary screen. It clock is automatically set and updated each time will remain until another call is received or any Caller ID information is received. button is pressed. You can see the total IMPORTANT: Allow at least
Resumen del contenido incluido en la página 17
TIP: If you choose not to use any of the Call CALL WAITING DISPLAY Waiting options, you may simply ignore the call waiting beeps and continue your conversation. With Call Waiting Caller ID service, a tone also The person calling will hear a continuous ring, as alerts you there is a new call coming while you if you are not home, or may be transferred to a are on an existing call. You will experience a voice mail account if available. short period of silence as the Caller ID informa- tion is pro
Resumen del contenido incluido en la página 18
REVIEWING CALL RECORDS DELETING CALLS • When the red NEW CALL indicator is on, you TO DELETE AN INDIVIDUAL CALL have received new incoming calls. Next to the When reviewing calls, you can delete an NEW symbol is the total number of calls. Press individual call by pressing the DELETE button the left or right arrow button to review the once. The contents of the display will be erased stored calls. and the rest of the Caller ID records will be • If the red NEW CALL indicator is still on when renumb
Resumen del contenido incluido en la página 19
1. Use the arrow buttons to scroll to the number DIAL BACK you want to call back. Use the DIAL BACK button to dial any telephone 2. If the number will not dial as shown, press the number shown in the display when connected to OPTIONS button. Repeat if necessary, until the a touch tone line. correct number of digits is shown. IMPORTANT: All phones on the line must be 3. Press DIAL BACK. The number dials hung up for this feature to work. automatically. CHANGING THE NUMBER FORMAT IMPORTANT: All pho
Resumen del contenido incluido en la página 20
VOICE MESSAGING Provided your phone company offers voice messaging service and you subscribe to it, the NEW CALL/VOICE MAIL indicator will flash to NEW CALL# 3:27 PM 1/05 CALL W AITING 4 show there is a message waiting. It will stop flashing after the message has been reviewed. CALL WAITING DIAL BACK NEW CALL/VOICE MAIL DELETE OPTIONS NEW CALL/VOICE MAIL indicator 20
