Resumen del contenido incluido en la página 1
2-9191
12-Number Memory
Call Waiting Caller ID
Telephone
User's Guide
1
We bring good things to life.
Resumen del contenido incluido en la página 2
IMPORTANT INFORMATION NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements. The Industry Canada does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be insta
Resumen del contenido incluido en la página 3
INTERFERENCE INFORMATION This equipment generates and uses radio frequency energy which may interfere with residential radio and television reception if not properly installed and used in accordance with instructions contained in this manual. Reasonable protection against such interference is ensured, although there is no guarantee this will not occur in a given installation. If interference is suspected and verified by switching this equipment on and off, the user is encouraged to try to correc
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS IMPORTANT INFORMATION ............................................................ 2 INTERFERENCE INFORMATION ........................................................ 3 HEARING AID COMPATIBILITY ....................................................... 3 INTRODUCTION .......................................................................... 5 CALLER ID WITH CALL WAITING ................................................. 5 BEFORE YOU BEGIN ..........................................
Resumen del contenido incluido en la página 5
INTRODUCTION Your Caller ID phone stores and displays specific information, provided by your local telephone company, to subscribers of Caller ID or similar caller identification services. You must subscribe to one of these services in order to use this unit. Your Caller ID phone enables you to: • Identify callers before you answer the phone. • View the time and date of each incoming call. • Record up to 60 Caller ID messages sequentially. • Know who called while you were away. CALLER ID WITH CA
Resumen del contenido incluido en la página 6
BEFORE YOU BEGIN PARTS CHECKLIST Make sure your package includes the following items: Short cord Store Quick Dial Caller ID AB ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 OPER RINGER VOLUME # 0 * OFF LO HI Volume Memory Redial Flash Telephone line Coiled cord cord Base Handset MODULAR JACK REQUIREMENTS You need an RJ11(CA11A) type modular jack, which is the most common type of phone jack and might look like the one pictured here. If you don’t have a modular jack, call your local phone co
Resumen del contenido incluido en la página 7
IMPORTANT: You will have approximately 60 seconds to replace the batteries before the memories stored in the handset are lost. Please read the instructions before replacing the batteries and have the batteries ready to be inserted beforehand. 1. If both the straight and coiled line cords are already connected, disconnect them from the base unit. Place the handset off to the side. 2. Use a screwdriver to loosen the two screws on the battery doors located on the bottom of the base. Once the screws
Resumen del contenido incluido en la página 8
SETTING UP THE CALLER ID MENU You should not plug the telephone into the wall line jack while setting up the Caller ID menu. An incoming call may invalidate the change if it was not yet saved. The phone must display xx CALLS before you can enter the setup menu. CALLER ID PHONE SETUP MENU delete dial review 1. Press and hold the REVIEW up button then press and hold the REVIEW down button. Continue to hold both buttons for 3 seconds. SETUP MENU ^ v appears. 2. At this point you can press either R
Resumen del contenido incluido en la página 9
TO SET YOUR LOCAL AREA CODE The telephone uses the programmed area code to determine the number format to display when a valid Caller ID signal is received and is also used for the Dialback feature. 1. Press and hold the REVIEW up button then press and hold the REVIEW down button. Continue to hold both buttons for 3 seconds. SETUP MENU ^ v appears. 2. Press the REVIEW up button until LOCAL AREA CODE appears. 3. To enter or change the area code, press the DELETE button. The display shows the pres
Resumen del contenido incluido en la página 10
3. Press the DELETE button to show the current language setting. The default is English. 4. Press REVIEW up or down to change the language. 5. Press DIAL to store the language and return to the CID LANGUAGE display. TO SET THE LCD CONTRAST This adjustment allows optimization of the contrast and viewing angle of the display. 1. Press and hold the REVIEW up button then press and hold the REVIEW down button. Continue to hold both buttons for 3 seconds. SETUP MENU ^ v appears. 2. Press the REVIEW up
Resumen del contenido incluido en la página 11
4. To change the dial mode, press REVIEW up or down. The display will alternate between the two modes. 5. Press DIAL to store the dial mode and return to the T/P DIAL MODE display. TO EXIT SETUP To exit the setup mode after your changes have been made, you can immediately exit by selecting the EXIT SETUP menu and pressing the DIAL button. NOTE: The phone will exit setup after 10 seconds if no buttons are pressed. REMINDER: The time and date are programmed automatically when the first Caller ID i
Resumen del contenido incluido en la página 12
INSTALLING THE PHONE TO INSTALL ON A DESKTOP 1. Plug the coiled cord into the handset. Plug the other end into the jack on the bottom end of the base. 2. Plug the long straight line cord into jack on the bottom of the base. Plug the other end into a wall jack. 3. Set the RINGER switch on the base to HI. • LO = Sound will be lower. • OFF = Telephone will not ring. 1 2 3 RINGER VOLUME OFF LO HI PB
Resumen del contenido incluido en la página 13
TO MOUNT ON A WALL 1. Plug the short line cord into the jack on the bottom of the base and connect the other end to a wall phone jack. 2. Feed the short line cord through the grooves provided so that the base area is flat and ready to mount on the wall. 3. Slip the mounting holes of the base (on bottom of unit) over the wall plate posts and slide the base down until the phone is firmly in place. 4. Plug the coiled cord into the handset. Plug the other end into the jack on the lower end of the ba
Resumen del contenido incluido en la página 14
CALLER ID FEATURES SUMMARY SCREEN The Summary Screen shows the current time, AM PM current date and number of new calls to be reviewed. It is displayed until any button is pressed. Within 10 seconds of receiving a new call, the Summary Screen will be displayed and the New Call LED will flash. NOTE: The number of new calls is displayed until any new calls have been reviewed. RECEIVING AND STORING CALLS This unit receives and displays information transmitted by your local phone company. This infor
Resumen del contenido incluido en la página 15
REVIEWING CALL RECORDS • Press either the REVIEW up or REVIEW down button to view the newest call record. • Press the REVIEW down button to scroll through the call records from the most recent to the oldest. • Press the REVIEW up button to scroll through the call records from the oldest to the newest. • When all of the messages have been viewed, START/ END appears in the display. DELETING CALL RECORDS • To delete the record shown in the display, press the DELETE button once. • To delete all reco
Resumen del contenido incluido en la página 16
IF YOU PROGRAMMED YOUR LOCAL AREA CODE IN THE SETUP MENU 1. Use the REVIEW up and down buttons to display the number you want to dial. • If you see a number with 7 digits (i.e. 555-1234), then the call was received from within your area code. However, this does not guarantee the call is a local call. • If you see a number with 11 digits (i.e. 1-234-555- 1234), then the call received was not from your area code. 2. Press the DIAL button and the display shows PICKUP or ADJ. A 15 second timer will
Resumen del contenido incluido en la página 17
2. See steps 2 through 4 in the above section to complete the dialback sequence. NOTE: If only PICKUP PHONE shows on the display, no other changes to the number can be made. The information sent from the telephone company is known to be a valid number for dialing back (available only in limited areas). Once you pickup the phone, the number will be automatically dialed. CALLER ID WITH CALL WAITING Provided your telephone company is able to integrate CALLER ID PHONE Caller ID and Call Waiting 12:3
Resumen del contenido incluido en la página 18
MESSAGE INDICATORS The following special messages indicate the status of a message or the unit: NO CALLS The caller memory is empty. UNKNOWN CALL The incoming call does not have Caller ID service or their service area is not linked to yours. If UNKNOWN CALL appears along with a calling number, the name information for that number was not available. LOW Battery power level is low. BLOCKED CALL The caller of the incoming call is registered as “Private Number” and their Caller ID information is wit
Resumen del contenido incluido en la página 19
TELEPHONE BASICS CHANGING THE VOLUME You are able to control the listening level with the VOLUME button, which has 3 levels. At the lowest level, the phone beeps once. It remains at the last level set until you change it. REDIALING A NUMBER If you want to call the last number you dialed again (up to 32 digits), use REDIAL. 1. Pick up the handset. 2. Press REDIAL. 3. The last number called is automatically redialed. USING ONE TOUCH REDIAL If the last call you dialed was busy, you can redial it im
Resumen del contenido incluido en la página 20
USING MEMORY FEATURES Before you store any telephone number into memory, make sure the dial mode is correct for the type of telephone you’re using. The default dial mode is tone (touch-tone), so if you have pulse (rotary) service, you must first change the dial mode. See “To Set the Dial Mode.” TO STORE EMERGENCY/QUICK DIAL NUMBERS 1. Pick up the handset. 2. Push STORE. 3. Enter the telephone number (up to 20 digits). If you make a mistake, hang up and repeat the procedure for storing from the b
