Resumen del contenido incluido en la página 1
XL340
www.philips.com/support
EN Telephone
!
Warning
Use only rechargeable batteries.
Charge each handset for 24 hours before use.
Resumen del contenido incluido en la página 2
Welcome mode Note Welcome mode is not available for some countries. Before using your XL340, you need to configure it according to the country of use. When you switch on the phone for the first time, your phone displays a welcome message in different languages. After a few seconds, your phone displays the countries available for selection. You can configure the country now. 1 View the countries available for selection. 2 Press the country number on the keypad to make a selection. For ex
Resumen del contenido incluido en la página 3
Table of contents 1 Important information 3 3.5 Using GAP standard compliance 9 3.6 Standby mode 9 1.1 For your safety 3 3.7 Verify the signal 9 1.2 Power requirements 3 1.3 Telephone connection 3 4 Using your phone 10 1.4 Need help? 3 4.1Call 10 1.5 Safety information 3 4.2 Answer a call 10 1.6Conformity 3 4.3 Loudspeaker phone 10 1.7 Safety precautions 3 4.4 Adjust the audio volume 10 1.8 Environmental care 3 4.5 End a call 10 1.9 Recycling & disposal 3 4.6 Make a second call 11 2 Your phone 5
Resumen del contenido incluido en la página 4
Table of contents 7 Quick reference table for menus 19 8 Technical data 20 9 Frequently asked questions 21 10Index 22 Table of contents 2
Resumen del contenido incluido en la página 5
1.5 Safety information 1 Important information ! Warning This equipment is not designed to make emergency calls when the power fails. An 1.1 For your safety alternative has to be made available to allow Before installing your XL340, carefully read the emergency calls. following information. 1.6 Conformity Hereby, Philips declares that the XL340 is in 1.2 Power requirements compliance with the essential requirements and The product requires an electrical supply of other relevant provision
Resumen del contenido incluido en la página 6
available treatment, recovery and recycling techniques to ensure human health and high environmental protection. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Do not dispose of your old product in your general household waste bin. Inform yourself about the local separate collection system for electrical and electronic products marked by this symbol. Use one of the following disposal options: Dispose of the complet
Resumen del contenido incluido en la página 7
2Your phone 2.1 What’s in the box 2 rechargeable batteries Base unit Handset Battery door Power adaptor for base Line cord* User manual Quick start guide Guarantee Make sure you have all these items in the box. For missing item(s), contact your dealer. In multi-handset packs, you will find additional handsets, chargers, power supplies, and batteries. Note *You may find in the box the line adaptor delivered separately from the line cord. In this case, please plug first this line adapter onto the
Resumen del contenido incluido en la página 8
AEarpiece 2.2 Overview of the phone BDisplay C Direct memory keys Use to access direct memories. D Talk key Use to take the line and answer a call. A In viewing memory, use to dial out the number. Use to end a call. E Speaker key B Use to turn on or off the speaker. Use to change the ringing melody. F Redial, Cancel & Recall key Use to cancel an operation. C Use to redial the last dialed number. D Use to send out a flash. F E G Digit keys Use to dial digits and enter characters. Use to access
Resumen del contenido incluido en la página 9
2.3 Overview of the base 2.4 Display icons When being used for the first time, it is A sometimes necessary to wait until the batteries are sufficiently charged before the icons appear B on the display. The display gives information about the operation of your telephone. The following icons can be shown in the headline of the display. Displays the current battery level. It scrolls during charging. The phone is in use. It blinks during ringing. There is a new voice mail in your network A
Resumen del contenido incluido en la página 10
2 Connect the charger adaptor to the wall mains supply. 3 Getting started 3.1 Connect the base Place the base station close enough to the telephone and the mains power sockets so that the cables will reach. 3.3 Insert the batteries in the handset 1 Place the two rechargeable batteries (included) into the battery compartment. ! Warning Verify the batteries polarity when inserting the batteries. Incorrect polarity may damage the product. 1 Connect the telephone line cord to the phone socket
Resumen del contenido incluido en la página 11
Place handset on the base unit or the charger and Battery life in talking mode: Up to 12 hours let the batteries continuously charge for 24 hours Battery life in standby mode: Up to 150 hours before using. Indoor range: Up to 50 meters Outdoor range: Up to 300 meters 3.5 Using GAP standard compliance The GAP standard guarantees that all DECT™ GAP handsets and base stations comply with a minimum operating standard irrespective of their makes. XL340 handset and base station are GAP compliant
Resumen del contenido incluido en la página 12
4.1.5 Call from phonebook memory 4 Using your phone Press while viewing a memory. The phonebook memory appears on display and is dialed. 4.1 Call Note ! Warning If the number is longer than 12 digits, only the last This telephone is not designed for making 12 digits are shown on display. emergency telephone calls when the power fails. For more details on the phonebook memory Alternative arrangements should be made for function, see “Phonebook memory”, page 13. access to emergency services
Resumen del contenido incluido en la página 13
number you want to make the intercom call 4.6 Make a second call to. 1 3 Press during a call. Press to answer the intercom when the R appears and you will hear a dial tone. phone is ringing. 2 Enter the number you want to call. 3 After the second call is answered, you can press to toggle between these 2 calls. 4.10 Text or number entry You can enter texts and numbers for the phonebook memories and other features. 1 4.7 Answer a second call Press corresponding key as many times as Durin
Resumen del contenido incluido en la página 14
Lower case input table Keys Assigned characters 1 [space] 1 , . ! ? : ; ' " 2 a b c 2 À Á Â Ä Æ Ç 3 d e f 3 È É Ê Ë Œ 4 g h i 4 Ì Í Î Ï 5j k l 5 [ ] 6 m n o 6 Ñ Ò Ó Ö Ø Ω 7 p q r s 7 ∆ Θ Λ Ξ Σ 8 t u v 8 Ù Ú Û Ü 9 w x y z 9 Ý Ÿ 00 $ @ _ ( ) < > ~ * * # + - / = & % Using your phone 12
Resumen del contenido incluido en la página 15
5.1.3 Delete all memories 5 Use more of your phone You can delete all memories by using the RESET function. See page 15 for more information. 5.1 Phonebook memory Your phone has 12 phonebook memories 5.2 Personalizing your phone providing you with the convenience for making calls. Each memory can store a name up to 12 characters and a number up to 24 digits. 5.2.1 Give your phone a name You can give your phone a different name. If you Memory type Associated key have more than one handset, y
Resumen del contenido incluido en la página 16
In standby mode: Language Name Index Number 1 Press and hold until you see MENU?. Polish 22 2 Enter 45. Portuguese 23 3 Press and hold to confirm. Finnish 24 The new setting is shown. Hebrew 25 5.2.7 Select ringing melody 5.2.3 Turn the backlight on/off In standby mode: The LCD and the key can be lit when the 1 Press and hold until you see the current phone is being used. melody name. In standby mode: 2 Select the desired melody by pressing digit 1 Press and hold until you see MENU?.
Resumen del contenido incluido en la página 17
2 2 Enter 51. Press and hold until you see Enter 52. Press and hold until you see BASE?. HANDSET?. 3 3 Select the base using the digit keys (1, 2, 3 or Enter the number of the handset you want to 4). Press and hold to confirm. unregister. Press and hold to confirm. 4 4 If you see PIN?, enter the system PIN If you see PIN?, enter the system PIN (default 0000). Press and hold until you (default 0000). 5 see SEARCHING.... Press and hold to confirm. 5 Press and hold on the base unit for 3
Resumen del contenido incluido en la página 18
3 Press and hold until you see PROCESSING.... 5.3.8 Select dial mode (country dependent) The default value of dial mode that is preset in 5.3.6 Select flash duration your XL340 should be the best suited for your This option is helpful when using operator country network and therefore you should not services. The default value of flash duration that is need to change it. preset in your XL340 should be the best suited In standby mode: 1 for your country network and therefore you Press and ho
Resumen del contenido incluido en la página 19
Note If the dialed number starts with #, * or P, the PREFIX will not be added. Note Press and hold to insert a pause in PREFIX. 5.3.11Message waiting indication If you have subscribed to the voice mail service from your local service provider, will be on when you have a new message in your mailbox. The LED on base station will blink. After you've listened to all the new messages, will turn off. The LED on base station will stop blinking. Note You may also see VOICEMAIL shown on the d
Resumen del contenido incluido en la página 20
6 Default settings These are the factory pre-programmed settings of your phone. Functions Settings after Reset Display Language Country dependent Handset Name PHILIPS Auto Pick-up Off Auto Hang-up On Backlight On Dial Mode* Tone Key Tone On Flash Duration* Flash 1 Pause Duration Pause 1 Prefix [Empty] Melody Selection RING 1 Ring Volume 3 blocks Receiver Volume 3 blocks Speaker volume 3 blocks Message Waiting Indication Off PIN Code 0000 Base selection AUTO Auto Dialing Off Last dialed number [E
