Manual de instrucciones de Watlow Electric Series 96

Resumen del contenido incluido en la página 1

SERIES 96
Plug and Play
Firmware and
Hardware
1
Watlow’s SERIES 96 is a powerful ⁄16 DIN dual display
Features and Benefits
controller that offers many advanced functions. This new
Burst fire
controller can be tailored to perform hardware and software
• Increase heater life/better temperature controllability
needs with hardware modules that are pluggable and
One input, one auxiliary input, four outputs
exchangeable and software menus that may be user
programmed to fit exact application requirements

Resumen del contenido incluido en la página 2

Output Types Specifications Open Collector/Switched DC Controller • Open collector configuration: • Microprocessor-based, user selectable control modes Maximum voltage 42VÎ(dc) • Heat and cool auto-tune for control outputs Maximum current 200mA • Universal input 1, auxiliary input 2, 4 outputs Maximum “on” resistance 1.1Ω • Control outputs user selectable as on-off, P, PI, PID Maximum offstate leakage current 100μA • Input sample period; Single input 10Hz (100 ms), dual • Switched dc configuration

Resumen del contenido incluido en la página 3

Communications Power • EIA/TIA-485 or EIA/TIA-232 • 100-240Vı(ac/dc) +10 percent, -15 percent; 50/60Hz, ±5 percent • Opto-isolated TM • 24-28Vı(ac/dc) +10 percent, -15 percent; 50/60Hz, • Modbus RTU protocol ±5 percent • 1200, 2400, 4800, 9600, 19200 baud rates • 7.0VA maximum power consumption • 32 maximum units can be connected (With additional • Data retention upon power failure via nonvolatile 485 repeater hardware, up to 247 units may be memory connected) Operating Environment Accuracy

Resumen del contenido incluido en la página 4

Ordering Information SERIES 96 9 6 - - Microprocessor-based 1 ⁄16 DIN with universal input 1. Options include: software, power supply, input 2, four outputs and display color Power Supply A = 100-240Vı(ac/dc) B = 24-28Vı(ac/dc) Input 2 0 = None 1 = Event input & 0-5VÎ(dc)/ 4-20mA (Remote set point input) Output 1 Panel Cutout C = Switched dc/open collector 44.958 mm x 44.958 mm D = Electromechanical relay, Form C, (1.77 in. x 1.77 in.) 2A, without RC suppression 52.0