Manual de instrucciones de Draper Satellite TV System 3010

Resumen del contenido incluido en la página 1

Instruction Guide for Installation
Model 3010
UHF/VHF/FM
• HDTV
• Digital
• Analog
WARNING: INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS.
FOR YOUR SAFETY, READ THE ENCLOSED “DANGER” BOOKLET BEFORE BEGINNING YOUR INSTALLATION.

Resumen del contenido incluido en la página 2

TOOLS YOU WILL FIND HANDY • Adjustable Wrench • Pliers WHERE TO MOUNT YOUR ANTENNA Your antenna can be mounted on either the chimney, the roof, or on an outside wall or in an attic. Choose the method that best suits your particular location. Mast tube size should be 1.25” to 1.66” outside diameter. TRANSMISSION LINE 75 Ohm coaxial cable. RG-6 if running long distance. RG-6 or RG-59 for short distance. ASSEMBLING ANTENNA STEP 1: Remove the bottom cover from the unit. Unsnap the cover fro

Resumen del contenido incluido en la página 3

Recess for FIGURE C FIGURE D snap fit Inside Housing Cover Bosses for M4 x 10mm + screws (2) + Cover tab slots (2) Four M6 x 12mm screws and M6 external tooth lockwashers from Cover Inside rear wall hardware bag Tabs (2) MOUNTING ANTENNA Mount the antenna on the mast using nest bracket and (2) bolts provided. Locate “F” connector on underside of housing. Screw on the mating cable connector (do not overtighten or allow unsupported cable to dangle from antenna connector). Slide weather boot over c

Resumen del contenido incluido en la página 4

ATTIC MOUNT GUYED ROOF MOUNT CHIMNEY MOUNT WALL MOUNT TRIPOD MOUNT INSTALLATION INSTALLATION INSTALLATION INSTALLATION INSTALLATION B B A C C C C B D B G D D B F M I L D A C O J K E H E N A-Roof Mount B-Mast C-Transmission Wire D-Snap-On Standouts E-Screw-In Standouts F-Guy Wire G-Guy Ring & Clamp H-Eyebolts I-Chimney Mount Straps J-Chimney Mount K-Ground Mount L-Wall Mount M-Tripod Mount N-Pitch Pads O-Lag Screws WARNING: INSTALLATION OF THIS PRODUCT NEAR POW