Manual de instrucciones de Nortel Networks Norstar M7310

Resumen del contenido incluido en la página 1

Enterprise Edge
M7310
User Card
© 1999 Nortel Networks
P0908513 Issue 01

Resumen del contenido incluido en la página 2

Resumen del contenido incluido en la página 3

Your Enterprise Edge M7310 Telephone Shift button For using the top function of a dual-memory button. Display shows the time, date, call information, and guides you. The lower line of the display is reserved for display button instructions. Dual-memory buttons store any two features and/or autodial numbers. Display buttons Feature button starts or ends a feature. Release button cancels active calls. Hold button Dial pad Memory and line buttons are buttons with indicators for one touch dialing, f

Resumen del contenido incluido en la página 4

Making and answering calls Answering calls Answering calls using the handset ¼ When your telephone rings, or flashes beside an Intercom or line button: 1. Lift the handset. OR Press the button beside the flashing ¼ before lifting the handset. Answering calls using Handsfree When your telephone rings, or ¼ flashes beside an Intercom or line button: 1. Press ©. Making calls Depending upon the dialing mode programmed on your telephone, you may have to lift the handset before making a call. Â Ext

Resumen del contenido incluido en la página 5

Programming memory buttons About memory buttons Memory buttons store telephone numbers or feature codes to give you one-touch dialling or feature activation. To use the top function, press the shift button, then press the dual-memory button. There are two types of memory buttons: single-memory and dual-memory. Dual-memory buttons: To use the bottom function, press the dual-memory button. Single-memory buttons: Single-memory buttons are the buttons with indicators other than line or Han

Resumen del contenido incluido en la página 6

Setting up the telephone ATTENTION Befor e attempting to Connecting the cords carry out any work on the telephone, ensure that the line cord is unplugged from the wall socket. To remove any of the cords, squeeze the release latch on the plug and gently pull the plug from the socket. Connect the handset cord to the jack labelled with the telephone icon and route the cord as shown. If you are using a headset, route the Connect to jack cord along the channel in the base and from distrib

Resumen del contenido incluido en la página 7

Setting up the telephone Mounting the telephone on the wall Page 5 Enterprise Edge M7310 User Card P0908513 Issue 01