Manual de instrucciones de NEC Topaz AT-21

Resumen del contenido incluido en la página 1

Conferencing


Establishing a Conference Call

Repeat for additional parties

Extension Number
FLASH

8 2 6 ? ? ?

(Talking) (Talk)
Trunk Code Telephone
Intelligent Hybrid System

9
? ?

FLASH

You can repeat this operation to add additional parties. You may

be able to have up to 8 parties in total (including your extension).










Single Line Telephone

User Guide

Nothing contained in this manual shall be deemed to be, and this manual

Resumen del contenido incluido en la página 2

Forwarding Calls / Do Not Disturb Before using Your Telephone… Thank you for purchasing the NEC “Topaz” system. Do Not Disturb (DND) Due to the flexibility built into the system, your Dialling Codes and Feature Capacities may differ from those in this guide. Check with your Supplier / System Administrator and make a note of any differences. DND : Trunk Incoming Call 8 4 7 1 DND : Intercom Incoming Call 2 Using Your Telephone DND : Trunk & Intercom Incoming Call 3 NEC A

Resumen del contenido incluido en la página 3

Answering Calls Placing Calls Picking up another Extension’s Call Placing an Outside Call In same Trunk Code Telephone Number 8 6 7 Group 9 ? ? ? ? In other 8 6 9 Groups Listen for Dial Tone before dialling the Telephone Number. Extension Number Pickup for Specified 7 1 5 ? ? ? Placing an Intercom Call Extension Extension Number System programming is required to allow Group Call Pickup. Ask your NEC Authorised Supplier for details. ? ? ? Your call

Resumen del contenido incluido en la página 4

If your call doesn’t go through… Placing Calls Quickly Setting / Answering a Message Waiting Indication Last Number Redial Set 8 4 1 # (Hear Busy Tone or No Answer) Intercom numbers can also be stored under Last Number Redial. (System programming is required. Ask your NEC Authorised Supplier for details.) Your phone’s Answer MW Indicator 8 4 1 is flashing When you set MW, the called party’s MW Indicator starts to flash. If y