Manual de instrucciones de Lenoxx Electronics PH-600

Resumen del contenido incluido en la página 1

®
DESIGNER PHONE
MODEL: PH-600, BP-600 AND BP-601
OPERATING INSTRUCTIONS
TONE/PULSE SWITCHABLE DIALING
•
RECEIVER VOLUME CONTROL
•
MUTE BUTTON - FOR TEMPORARY HOLD
•
FLASH BUTTON - FOR NEW DIAL TONE
•
REDIAL BUTTON - FOR BUSY SIGNALS
•
DESK OR WALL MOUNTABLE
•
FULLY MODULAR JACKS
•
MODERN CONTEMPORARY STYLING
•
NOTE: READ AND FOLLOW THESE INSTRUCTIONS BEFORE USING YOUR TELEPHONE
E
PH-600082799 MS V.2

Resumen del contenido incluido en la página 2

IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, the following basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury: 1. Read and follow all instructions and warnings. 2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a slightly dampened cloth only. 3. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundr

Resumen del contenido incluido en la página 3

IMPORTANT TELEPHONE COMPANY & FCC INFORMATION CAUTION : TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL INJURY, DO NOT OPEN CABINET. WE SUGGEST THAT YOU REVIEW THE FOLLOWING INFORMATION PROVIDED BY THE FCC (FEDERAL COMMUNICATIONS COMMISSION). FCC REGISTRATION This telephone set is registered with the FCC based upon compliance with Part 68 of its rules. Con- nection of this telephone to the nationwide telecommunications network must be through a standard network jack (RJ11W or

Resumen del contenido incluido en la página 4

Congratulations for purchasing a Lenoxx Sound telephone. Some of the features of the PH-600, BP-600 and BP-601 are: LAST NUMBER REDIAL - Useful if line is busy. DESK OR WALL MOUNTABLE - No special hardware needed. TONE/PULSE SWITCHABLE - Select the desired dialing mode. ADJUSTABLE HANDSET VOLUME CONTROL - Adjusts and raises volume of receiver. FLASH BUTTON - For alternate pay service such as call waiting or getting a new dial tone quickly. FULLY MODULAR JACKS - For easy plug-in installation. REV

Resumen del contenido incluido en la página 5

TELEPHONE OPERATION 1.RECEIVING A CALL: When your telephone rings, pick it up and use like any basic telephone. 2.DIALING A CALL: Pick up the phone, wait for dial tone and dial the number desired. 3.ENDING A CALL: After you have finished a conversation, just hang up. 4.TO REDIAL LAST NUMBER: If you want to redial the last number quickly, get a new dial tone, press the Redial Button. To erase redial memory, lift the handset and dial any numbers. 5.FLASH BUTTON: The button is used to get a new dia

Resumen del contenido incluido en la página 6

TROUBLE SHOOTING PROBLEM LIKELY CAUSES 1.Plug disconnected from jack. No dial tone 2.Jack improperly wired. 1.Damaged cord. 2.Jack improperly wired. Phone is dead 3.Line out of order. 1.Ringer Switch in OFF position. Can make calls but phone Slide the Switch to ON position. does not ring 1.If your other telephones are Rotary type phones, Can receive but cannot move Tone/Pulse Switch to PULSE position. make calls 2.Contact your phone company to have your line changed to Tone and Pulse service. LI