Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
CONTENT CONTENTS 2 CALLER DISPLAY 18 View Caller Display List 19 INTRODUCTION Dial a Number from the Important safety instructions 3 Caller Display List 19 Unpacking the AmpliVOICE50 3 Delete an Entry from the Caller Display List 20 DESCRIPTION Delete all Entries from the General Description 4 Caller Display List 20 LCD Screen Description 6 Copying a Number to the Menu Navigation 6 Phone Book 20 INSTALLATION Setting Up 7 PHONE BOOK 21 Wall Mounting 9 Create
Resumen del contenido incluido en la página 3
INTRODUCTION IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl,kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric sho
Resumen del contenido incluido en la página 4
DESCRIPTION General Description 12 3 45 6 7 8 9 10 11 12 13 14 15 18 17 16 4
Resumen del contenido incluido en la página 5
DESCRIPTION 21 20 19 1= Call back, confirm 2= Quick Dial M1 (emergency call number 1) 3= Delete 4= Quick Dial M2 (emergency call number 2) 5= Scroll upwards 6= Quick Dial M3 (emergency call number 3) 7= Scroll downwards 8= LED( flashes when a new call has been received) 9= Menu button 10= Phonebook, Exit, Caller ID 11= Recall 12= Mute 13= Redial, Insert a pause 14= Handsfree 15= LED, telephone is ringing 16= Earpiece amplifier button 17= LED, receiver volume 18= Control knob for receiver volu
Resumen del contenido incluido en la página 6
DESCRIPTION LCD Screen Description Time and Date Battery Icon New Calls Calls Received Received This LCD display shows the total number of calls and the number of new calls ready to be reviewed. In this example you have a total of 4 calls which includes two new calls. Caller’s Number Caller’s Name Menu Navigation To access settings, press MENU. To exit the menu, press CID. To skip back a level within the menu, press DELETE The telephone will automatically return to standby mode from any men
Resumen del contenido incluido en la página 7
INSTALLATION Setting Up Connect the handset to one end of the curly cord. The connector at the end of the curly cord plugs into the socket on the left hand side of the AmpliVOICE50 unit. Open the battery compartment (push the small clip backwards and then upwards). Insert 4 good quality alkaline batteries (AA size, 1.5V type, not supplied) into the battery compartment located on the base of the telephone. Replace the battery cover. If the batteries are running low, the battery icon will
Resumen del contenido incluido en la página 8
INSTALLATION Note: Mains power is required to power the multifunction features of the telephone. Fit 4 x AA sized batteries in order to save and use stored numbers in case of mains power failure. Without mains or battery power, the telephone can still be used to answer calls or to manually dial out calls but all the multifunction features will not be available. If no batteries are inserted, the battery icon will be displayed on the LCD display. 8
Resumen del contenido incluido en la página 9
INSTALLATION Wall Mounting Feed the guide tabs (1) on the wall-mounting bracket (2) in the slots (3) on the underside of the telephone. Slide the wall-mounting bracket 10 mm upwards until it audibly locks into place. Drill a hole and insert a screw leav- ing about 5 mm of the screw projecting from the wall. Guide the mounting hole (4) in the mounting bracket (2) over the screw and slide the telephone downwards. Caution: Ensure there are no electrical lines, water pipes etc. in the wall where
Resumen del contenido incluido en la página 10
SETTINGS Language Setting You can choose between 4 different languages including English and French. Each language has voice announcements available in that language. Press MENU Use ▲ or ▼ to select LANGUAGE Press DIAL to select Use ▲ or ▼ to select the desired language Press DIAL to select Press CID to exit Screen Contrast Setting Your screen has a backlight which automatically switches off after 15 seconds of inactivity. The contrast of the backlight against the text can be increased
Resumen del contenido incluido en la página 11
SETTINGS Time Setting If you subscribe to a Caller Display service, the date and time will be set whenever you receive a call. However, if you do not subscribe to this service, you will need to set the date and time manually. Press MENU Use ▲ or ▼ to select TIME/DATE Press DIAL to select The HOUR digit will flash. Use ▲ or ▼ to select the correct hour Press DIAL to confirm The MINUTE digits will flash. Use ▲ or ▼ to select the correct minute Press DIAL to confirm The MONTH digit will fla
Resumen del contenido incluido en la página 12
SETTINGS Voice Function Setting When the VOICE function is ON, in pre-dial mode numbers 0-9, numbers held in the call log, numbers held in the phone book and a caller’s name (if recorded, see Phonebook Chapter – Storing Name Recording) will be announced in the loudspeaker. Press MENU Use ▲ or ▼ to select VOICE Press DIAL to select Use ▲ or ▼ to select ON/OFF Press DIAL to select Press CID to exit Flash (Recall) Setting Many special telephone services, such as Call Waiting, require a switch
Resumen del contenido incluido en la página 13
USING THE TELEPHONE Press MENU Use ▲ or ▼ to select TONE/PULSE Press DIAL to select Use ▲ or ▼ to select the desired method, TONE or PULSE 40/60 Press DIAL to select Press CID to exit Ringer Volume Setting A switch located on the right side of the AmpliVOICE50 unit allows the ringer to be switched to LOW, MEDIUM or HIGH. Making a Call Pick up the handset. When you hear the dialling tone, dial the number on the keypad. The number will be displayed on the LCD display To end the call simply
Resumen del contenido incluido en la página 14
USING THE TELEPHONE Making a Call – Hands Free Dial the number on the keypad in the on-hook position Use DELETE if necessary to cancel and correct a wrong digit Press and the number will be dialled automatically. The handsfree function (speaker) is now activated and the LED indicator next to the button will be illuminated. When the third party answers the call, you may speak with the telephone in the hands free mode ( handset in the cradle). Speak towards the microphone located on the fro
Resumen del contenido incluido en la página 15
USING THE TELEPHONE Receiving a Call When an incoming call is received, the telephone rings and the LCD display backlight lights up. If the caller can be identified (due to subscription to a Caller Display service), the caller’s telephone number will be displayed. The caller’s name will also be displayed provided that the number and name stored are in the phone book. If the VOICE setting is ON and the caller can be identified and a voice recording is associated with the incoming call, the
Resumen del contenido incluido en la página 16
USING THE TELEPHONE Mute Function If you wish, you can speak privately to someone else in the room without your caller overhearing. You will still be able to hear the caller but they cannot hear you during the mute operation. To switch on the mute mode during a call just press and hold MUTE button. Your caller will not be able to hear you anymore. Release MUTE to resume the conversation with your caller. Handset Volume Setting During a call, the handset volume can be adjusted to one of 10
Resumen del contenido incluido en la página 17
USING THE TELEPHONE Call Timer Your handset automatically times the duration of every external call. The time is shown during the call and for a few seconds after the call has ended. Hearing Aid Use This telephone is hearing aid compatible. Select the T mode on your hear- ing aid to enable this feature. 17
Resumen del contenido incluido en la página 18
CALLER DISPLAY The features described in this section are only available if you subscribe to a Caller Display service from your network provider. Caller Display means you can see who is calling before you answer a call or see who has called in your absence (provided the number is not with- held, unavailable or is an international call). If the number is stored in the phonebook, the caller’s name is also displayed Whether you take a call or not, the caller’s details are stored in the Call log
Resumen del contenido incluido en la página 19
CALLER DISPLAY Your telephone displays incoming call waiting Caller ID information while you are on another call. Once you have received a Call Waiting call, the CALL WAITING icon will light. Note: The Call Waiting information will be disappear after 20 seconds. View Caller Display List Use ▲ or ▼ to scroll through the caller display list Notes: At the end of the caller display list the LCD display will display END OF LIST. If there are no caller display telephone numbers in the caller d
Resumen del contenido incluido en la página 20
CALLER DISPLAY Delete an Entry from the Caller Display List Use ▲ and ▼ to scroll through the caller display list until you find the telephone number you wish to delete Press DELETE, DELETE? will be shown on the LCD display Press and hold DELETE until the telephone number disappears Press CID to exit Delete All Entries from the Caller Display List Use ▲ and ▼ to scroll through the caller display list until you find the telephone number you wish to delete Press and hold DELETE, DELETE ALL? will b
