Resumen del contenido incluido en la página 1
—
——
——
—
—
—
—
—
—
——
—
——
——
—— —-—
—
— —— ———
—— —
—— —
—
—— —
—— —
—
—— —
—— —
—
—-
—— —_—_ =
—
—— —
. —
—
—-
—
—
—
—
—
— —
—
( —
— —
—
—
—
— —
——
— —
—
——
—
—
— ——
—
—
—
. ~ Installation Instructions =
—
— ——— ———
——
— ——
——
—
——
—
— —— .
—
—
Resumen del contenido incluido en la página 2
BEFORE YOU BEGIN . . . The GE model 2-9450 is a multiple line business telephone that is designed for easy installation in your home or office. However, it is important that you follow these few simple guidelines. ■ Take a few minutes to read this material so that you thoroughly understand the sequence of steps to be followed for proper installation of your GE 2-9450 telephones. ■ As you read the instructions you may require additional line cords or other components not included with this produc
Resumen del contenido incluido en la página 3
FEATURES: ■ 32 One-Touch Memory 9 Volume Control Buttons 9 Pulse~one Switch ■ Temporary Tone ■ Intercom ■ Page ■ Call Transfer ■ Fast Redial ■ Mute ■ Do Not Disturb ■ Auto Busy Redial ❑ Hold ■ Conference ■ Speakerphone LOCATION OF CONTROLS: 1.- Handset 2.- Handset Jack 3.- Coiled Cord 4.- Base Jack 5.- Telephone Line Cord 6.- Speaker / // 7.- Station Page Button 8.- Handset Hook 9.- Hook Switch 10.- Telephone Base Unit 11.- Memory Index Cover 12.- Quick Reference Guide 13.- Battery Compartment 1
Resumen del contenido incluido en la página 4
Identify Your Existing Wiring System In order for you to properly connect your GE 2-9450 telephones to an ex- isiting wiring system it is imperative that you understand its configura- 1. tion. The following are the most common multiple line situations. They consist of either one or both types of standard telephone jacks: the RJ1l Single Line Jack; and the RJ14 Double Line Jack. Your system should match one of them. 2 incoming lines with @ 1 wall jack ! c ] o e U LINE 1-2 RJ14 JACK 2 incoming lin
Resumen del contenido incluido en la página 5
4 incoming lines with m :: 3 wall jack w o m u u ~ LINE 1-2 LINE 3 LINE 4 -. RJ14 JACK .. RJ1l JACK RJ1l JACK 4 incoming lines with m 4 wall jacks * o o a LINE 1 LINE 2 LINE 3 LINE 4 RJ1l JACK RJ1l JACK RJ1l JACK RJ1l JACK Label the jacks at each location. Identifying and Iabelling each jack at each location is also critical. To do so, simply take a felt tip pen and write the information on the jack plate. For example: If you have difficulty in identifying wall jacks. Call the vendor who install
Resumen del contenido incluido en la página 6
Plan Your Installation Afier identifying the system wiring, use the WORK SHEET to the right to plan you installation. 2. , Up to 16 GE 2-9450 telephones may be connected to form your office I configuration. Each phone will be assigned a Station Number (first column). In the second column, write the location. Next, check either “desk” or “wall” placement. Then check which lines are to be connected to that station. /mpoHant: Each telephone must be connected to line 1 and line 2 for proper operatio
Resumen del contenido incluido en la página 7
., ;. Work Sheet ~nes to be Connected Station bcation ;:;=; Tel. 1 Tel. 2 Tel. 3 Tel. 4 Number User’sName ; ; # # No. 1 No. 2 / / No. 3 / / No. 4 / > / No. 5 / d No. 6 / / No. 7 / / No, 8 / / No, 9 / / No. 10 / / No. 11 / / No. 12 d / No. 13 / / No. 14 / / No. 15 / / No. 16 / / .“,
Resumen del contenido incluido en la página 8
Install Desk or , Table Top Telephones /MPORTANZ Telephone line cords must be con- 3. nected (Steps D through F) before AC power con- nection is made (Step G). Please follow these steps in their proper sequence. The GE 2-9450 telephone has been factory assembled for use on a desk or table. A. Remove the clear ACRYL/C COVER that covers the MEMORY /NDEX. Carefully remove the / MEMORY INDEX CARD and the QUICK REFERENCE GUIDE. 1 B. NOTE: THIS STEP IS ESSENTIAL. You must install a 9V Alkaline Battery
Resumen del contenido incluido en la página 9
E. Connect a LONG TELEPHONE L/NE CORD to the jack on the back of the telephone Iabelled L/NE 3-4. Connect the other end to wall jack(s) Iabelied 3 & 4 in the same manner described above. F. Connect either end of the CO/LED CORD to the jack on the side of the TELEPHONE BASE UNIT. Connect the other end to the jack in the HANDSET. Place the HANDSET in the cradle. G. Plug the AC POWER SUPPLY CORD into the jack on the telephone Iabelled DC 9V Thread the cord behind the STRAIN RELIEF. Plug the AC POWE
Resumen del contenido incluido en la página 10
Install Wall Mounted Telephones (optional) /~~O~~A~Z Telephone line cords must be con- .50 ■ netted (St eps E through L) before AC power con- O ‘n 4 5 ‘7 nection is made (Step M). Please follow these steps E n o optional) in their proper sequence. m The GE 2-9450 telephone can be wall mounted to an existing wall phone jack. A. Remove the clear ACRYL/C COVER that covers the MEMORY /NDEX. Carefullv remove the ! MEMORY INDEX CARD and the QUICK I REFERENCE GUIDE. B. NOTE: THIS STEP IS ESSENTIAL. You
Resumen del contenido incluido en la página 11
D. Reverse the HANDSET HOOK by firmly sliding it out of cradle, rotating it 180°, and sliding it back into the cradle. E. Remove the BACK COVER PLATE from the TELE- PHONE BASE UN/T by pushing in the two tabs. F. If the wall jack is Iabelled Line 1-2, connect the short TELEPHONE L/NE CORD to the jack on the telephone Iabelled LINE 1-2. If the wall jack is Iabelled Line 3-4, connect the cord to the jack on the telephone Iabelled L/NE 3-4. G. Thread the SHORT TELEPHONE LINE CORD through the square
Resumen del contenido incluido en la página 12
O. Plug the AC POWER SUPPLY into the nearest electrical outlet. R After you plug in the AC POWER SUPPLY you should see the /NTERCOM LED flash red and green. Consult the WORKSHEET above to see which Station Number you have assigned to this telephone. Press that same number on the MEMORY/lNTERCOM INDEX. The phone will beep, and the LED will start flashing red as it II checks to see if this station address is already in use. If this station address is not already in use, the LED will turn off and t
Resumen del contenido incluido en la página 13
System Verification Problem? Check the following for a solution before calling our toll free “HELP” number at 800-448-0329 5. The following procedure should be used to test system configuration and identify possible system connection errors. The phone must be con- nected to the AC power supply, lines 1 and 2 must be connected to the line 1, 2 jack, and the phone must have been programmed with an inter- com station address. Press the line 1 button. The line 1 LED and speakerphone LED 1. should tu
Resumen del contenido incluido en la página 14
Troubleshooting Chart PROBLEM SOLUTION 6. LED’s do not light. Is AC power supply plugged into an electrical j outlet and the telephone. Telephone does not Is a good 9 volt battery installed? (A 9 volt ope~ate during power battery will allow use of the handset during outages. power outages.) Telephone functions Is AC power supply plugged into an electrical with the handset, but outlet and the back of the telephone. there is no response to any button with the phone on hook. k LED above intercom In
Resumen del contenido incluido en la página 15
Troubleshooting Chart PROBLEM SOLUTION 6. Telephone does not in- This product only indicates the status of other dicate the Line in Use 2-9450 telephones. of other types of .. telephones. No dial tone when This is normal. To use, a line button must be handset is picked up. pressed after picking up the handset. No dial tone when line Is AC power supply plugged into an electrical button is pressed. outlet and the telephone. Check hookswitch: Does it fully extend from the base when the handset is l
Resumen del contenido incluido en la página 16
I FCC REGISTRATION INFORMATION Your GE telephone equipment is registered with the Federal Communications Commission and IS in compliance with parts 15 and 68, FCC Rules and Regulations. 1 Notification to the bcal Telephone ‘Company On the bottom of this equipment is a label indicating among other information, the FCC Registration number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your tele~hone comDanv, /f you require new te/ephone /
