Resumen del contenido incluido en la página 1
Owner’s Manual
Model 1814
Electronic Directory Telephone Entry System
DoorKing, Inc.
120 Glasgow Avenue
Inglewood, California 90301
U.S.A.
Phone: 310-645-0023
Fax: 310-641-1586
www.doorking.com
P/N 1814-065 REV J, 4/07
Copyright 2001 DoorKing, Inc. All rights reserved.
Resumen del contenido incluido en la página 2
2
Resumen del contenido incluido en la página 3
Use this manual with the following models only. All 1814 models with circuit board 1843-010 REV A and B. DoorKing, Inc. reserves the right to make changes in the products described in this manual without notice and without obligation of DoorKing, Inc. to notify any persons of any such revisions or changes. Additionally, DoorKing, Inc. makes no representations or warranties with respect to this manual. This manual is copyrighted, all rights reserved. No portion of this manual may be
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS Preface Important Notices......................................................................................................................................................6 General Information ..................................................................................................................................................7 Features ..........................................................................................................................
Resumen del contenido incluido en la página 5
3.3 Programming Letters, Numbers and Messages 3.3.1 Programming Letters and Numbers .........................................................................................29 3.3.2 Programming the User Message .............................................................................................30 3.3.3 Programming the Instruction Message ....................................................................................31 3.4 Programming Phone Numbers and Names ....................
Resumen del contenido incluido en la página 6
IMPORTANT NOTICE FCC - UNITED STATES This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules and Regulations. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause h
Resumen del contenido incluido en la página 7
IMPORTANT INFORMATION • Prior to beginning the installation of the telephone entry system, we suggest that you become familiar with the instructions, illustrations, and wiring guidelines in this manual. This will help insure that you installation is performed in an efficient and professional manner. • The proper installation of the telephone entry panel is an extremely important and integral part of the overall access control system. Check all local building ordinances and building cod
Resumen del contenido incluido en la página 8
FEATURES • Can provide service for up to 3000 residents. • System keypad will emit DTMF tones after a call is answered allowing the system to be used with auto-attendants, answering machines, etc. This feature is available with the following units only: Model 1814 with 1843-010 circuit board, REV B or higher. • Directory codes can be set from 1 to 4 digits in length and can be randomly assigned. • 10 programmable area codes allow the system to be used in areas requiring 10 and 11-digi
Resumen del contenido incluido en la página 9
SECTION 1 - INSTALLATION Order your telephone line at least two weeks prior to the planned installation date. This will assure that a phone line is available when the unit is installed. The telephone company will require the following information from you: Type: Touch Tone, Loop Start Ringer Equivalence: 0.0 A Jack Type: RJ11C FCC Registration (US): DUF6VT-12874-OT-T DOC (Canada): 1736 4528 A Electrical Listing: Complies with U.L. 294 - ETL Listed CALLER ID: You may want to co
Resumen del contenido incluido en la página 10
1.1.1 Surface Mount Units Surface mount units can be mounted directly to a wall or pilaster, or can be post mounted using a DoorKing heavy-duty mounting post (p/n 1200-047 and 1200-048). Be sure the unit is mounted securely and is not subject to vibration from closing doors or gates. WARNING! If this entry system is used to control a vehicular gate with an automatic gate operator, the entry system must be mounted a minimum of ten (10) feet away from the gate and gate operator, or in s
Resumen del contenido incluido en la página 11
1.1.2 Surface Mount Units with Recess Box Surface mount units can be semi-flush mounted into a wall or pilaster by using the optional recess- mounting box (p/n 1803-150). Be sure the unit is mounted securely and is not subject to vibration from closing doors or gates. WARNING! If this entry system is used to control a vehicular gate with an automatic gate operator, the entry system must be mounted a minimum of ten (10) feet away from the gate and gate operator, or in such a way that a
Resumen del contenido incluido en la página 12
1.1.3 Flush Mount Units Flush mount units are installed into a wall with flush mount kits 1814-065 (stainless) or 1814-066 (gold). Flush mount kits are not included with the entry system. Flush mount units are not designed for direct exposure to the weather. Be sure the unit is mounted securely and is not subject to vibration from closing doors or gates. WARNING! If this entry system is used to control a vehicular gate with an automatic gate operator, the entry system must be mount
Resumen del contenido incluido en la página 13
1.1.4 Flush Mount Rough-in Box The flush mount installation kit has two parts; the rough-in box and the trim ring. The rough-in box is installed first. 12.75 1.875 9.0 3.875 10-24 x 1.125 Stud 1.125 DIA 3.5 1.75 9.25 .25 DIA 1.75 6.375 11.0 13 1.75 11.0 1.75 1.25 4.25 7.25 10.25 13.25 14.5
Resumen del contenido incluido en la página 14
1.1.5 Flush Mount Trim Ring Flush mount units can be mounted by using the 1814-065 (stainless) or 1814-066 (gold) mounting kit. Flush mounting kits are not included with the unit. Flush mount units are not designed for direct exposure to the weather. Be sure the unit is mounted securely and is not subject to vibration from closing doors or gates. WARNING! If this entry system is used to control a vehicular gate with an automatic gate operator, the entry system must be mounted a min
Resumen del contenido incluido en la página 15
1.1.6 Flush Mount Surface Mounting Kit Flush mount units can be surface mounted by using the optional 1814-152 surface mount trim ring. Flush mount units are not designed for direct exposure to the weather. Be sure that the unit is securely mounted and is not subject to vibration from closing doors or gates. WARNING! If this entry system is used to control a vehicular gate with an automatic gate operator, the entry system must be mounted a minimum of ten (10) feet away from the gate a
Resumen del contenido incluido en la página 16
1.1.7 Wall Mount Units Wall mount units (models 1815 and 1817 only) are designed to be mounted directly onto a wall without the need of cutting a large hole as is necessary with flush mount units. Wall mount units are not designed for direct exposure to the weather. Be sure the unit is mounted securely and is not subject to vibration from closing doors or gates. WARNING! If this entry system is used to control a vehicular gate with an automatic gate operator, the entry system must b
Resumen del contenido incluido en la página 17
1.2 MEMORY CHIP INSTALLATION The telephone entry system is shipped with two memory chips packaged in a separate box inside the shipping container. The memory chips must be installed for the telephone entry system to operate. CAUTION!! Do not install the memory chips with power to the telephone entry system turned on. Attempting to install the memory chips with power on will irrevocably damage the chips. CAUTION!! The memory chips are a static sensitive component. Discharge any st
Resumen del contenido incluido en la página 18
1.3 POSTAL LOCK INSTALLATION At some locations, such as gated communities, it will be necessary to provide access to the mail carrier so that they can deliver the mail. Mail carrier access will be provided by the installation of an Arrow Postal Lock. This is the same lock that the Post Office uses for gang mailboxes. These locks are not available to the public. The installer or the building owner/manager will have to call the Post Office and arrange for the installation of this lock i
Resumen del contenido incluido en la página 19
SECTION 2 – WIRING Prior to installing wiring to the telephone entry system, we suggest that you become familiar with the instructions, illustrations, and wiring guidelines in this manual. This will help insure that you installation is performed in an efficient and professional manner. The wiring of the telephone entry panel is an extremely important and integral part of the overall access control system. Use proper wire for the communication line, power wires, and be sure that the s
Resumen del contenido incluido en la página 20
12 34 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 16 VAC - + 20 VA Back-up Earth Ground Battery Phone Wiring Maximum Distance Power Wiring Maximum Distance 800 Feet 24 AWG 100 Feet 18AWG 1600 Feet 22 AWG 200 Feet 16 AWG 20
