Resumen del contenido incluido en la página 1
4289 Bonny Oaks Drive • Chattanooga, TN 37406
TEL: (800) 426-3738 • FAX: (800) 325-8871
email: claritycs@plantronics.com website: www.clarityproducts.com
Resumen del contenido incluido en la página 2
E N G L XL25s I (Line Powered) S Amplified telephone with both incoming and H outgoing voice amplification E S P A Ñ O L Operating Instructions F Ameriphone products are manufactured by ® Clarity , a Division of Plantronics, Inc. R 4289 Bonny Oaks Drive, Chattanooga,TN 37406 A Tel: (800) 426-3738 Fax: (800) 325-8871 Email: claritycs@plantronics.com N Website: www.clarityproducts.com Ç ©2004 Clarity, a Division of Plantronics, Inc. All rights reserved. A Ameriphone, Amplifying Your Life an
Resumen del contenido incluido en la página 3
Contents Important safety Instructions ........................................................................1 Introducing the XL-25s Warranty Service ......................................................................................4 Sales Receipt ............................................................................................4 Help from Ameriphone................................................................................4 Package checklist................................
Resumen del contenido incluido en la página 4
E Important Safety Instructions N G L When using your telephone 8.Do not cover the slots and I equipment, basic safety precautions openings on this telephone. S should always be followed to This telephone should never reduce the risk of fire, electric be placed near or over a H shock and persons including the radiator or heat register. This following: telephone should not be 1.Read and understand all placed in a built-in installation instructions. unless proper ventilation is 2.Follow all
Resumen del contenido incluido en la página 5
Important Safety Instructions apart. Opening or removing 15. Never install telephone covers may expose you to wiring during a lightning dangerous voltages or other storm. risks. Incorrect reassembly 16. Never install telephone can cause electric shock when jacks in wet locations the appliance is subsequently unless the jack is specifically used. designed for wet locations. 14. Unplug this product from the 17. Never touch uninsulated wall outlets and refer telephone wires or terminals servi
Resumen del contenido incluido en la página 6
Important Safety E Important Safety Instructions Instructions N G L label identifies certified equipment. cause to request the user disconnect I This certification means that the the equipment. S equipment meets certain telecommunications network H Users should ensure for their own protective operational and safety protection that the electrical requirements. The Department ground connections of the power does not guarantee that the utility, telephone lines and internal equipment will operate
Resumen del contenido incluido en la página 7
Introducing the XL-25s Thank you for selecting the Help from Clarity amplified telephone XL-25s from For help with using your XL-25s, Clarity. These Operating call our Customer Service Instructions and the associated department at (800) 426-3738. Quick Operating Guide provide you with the information you Please make sure your XL-25s need to use your XL-25s package includes the items shown effectively and safely. Read this in Figure 1. manual thoroughly before using your telephone. Keep the m
Resumen del contenido incluido en la página 8
E Package Checklist N G L I S H XL25s Handset Base Unit XL-25s Telephone Line Cords OPERATING INSTRUCTIONS AND QUICK GUIDE Handset Phone Base Plate Operating Guides Coil Cord Figure 1 - Package Components 5
Resumen del contenido incluido en la página 9
Features on the XL-25s RING TONE switch AUDIO OUTPUT jack Phone line connection P T RINGER volume switch TONE/PULSE switch Phone number directory MEMORY button XL25s REDIAL button FLASH button OUT VOL outgoing volume slider HOLD AMPLIFY button button IN VOL incoming volume PROG program button slider Figure 2 - Base Unit Controls 6
Resumen del contenido incluido en la página 10
E Setting up Your XL-25s N G L There are five steps involved in I setting up your XL-25s. S 1. Insert one 9 volt alkaline H battery for extra bright ring Insert battery flasher (optional) here Note: For your safety always Press in here to open unplug the phone line before you battery compart- install or replace the backup ment battery. Figure 3 2. Decide if you want the phone to sit on a desk or hang on the wall. To install a new battery: 3. Connect the telephone 1. Slide open the batter
Resumen del contenido incluido en la página 11
Setting up Your XL-25s hook points up and will hold Connecting for Desk or Wall Mount the handset when you hang Desktop Use up. 1. Connect the telephone line cord and the handset cord to the telephone as shown in Figure 4. Figure 5 - Reversing the Hook 2. Insert the tabs of the phone Figure 4 - Connecting the Components base into the slots in the lower position of the base as 2. Plug the AC adapter into an shown in Figure 6. Push the electric outlet and into the phone base in and down t
Resumen del contenido incluido en la página 12
E Setting up Your XL-25s N G L 3. Plug in the short phone line I cord and mount the phone S as shown in Figure 7. H Figure 7 - Wall mounting installation 4. See Desktop Use section and follow steps 1 and 2. 9 MANUAL AUTO
Resumen del contenido incluido en la página 13
Using Your XL-25s Outgoing Voice Volume 1. Press the OUT VOL AMPLIFY button as shown in Figure 8 to turn the outgoing voice amplifier on or off. Figure 9 - Volume Slide Control Note: In standard use of the XL-25s, the amplifier turns off whenever you hang up the telephone. This is a useful feature if many people use the phone. If Figure 8 - AMPLIFY Button you want the amplifier to always remain on at the most recent 2. Adjust the outgoing speech volume setting, slide the switch on volume b
Resumen del contenido incluido en la página 14
E Using Your XL-25s N G L Incoming Voice Volume 2. The RING TONE has two pitch I settings: LO and HI. S The XL-25s provides extra volume H (12dB) to increase incoming sound. To increase incoming Hold sound: To put the line on hold, press the 1. Adjust the IN VOL slide control HOLD button and return the in Figure 11 to suit your handset to its cradle. You will hearing. notice the red indicator light comes on. Note: If you pick up an extension phone on the same line when the XL-25s is on HOLD,
Resumen del contenido incluido en la página 15
Using Your XL-25s Figure 14 - Redial Button Flash Press the FLASH button shown in Figure 15 to access special services available from your local phone company such as Call Waiting and 3-Way Calling. PostScript Picture (FLASHBUT.TON) Figure 15 - Flash Button 12
Resumen del contenido incluido en la página 16
E Special Features N G L Programming the Memory Buttons 2. Enter the phone number on the I keypad (Figure 18) just as you S You can automatically dial twelve would dial it normally. H programmed telephone numbers using the memory buttons shown in Figure 16. Each button can be programmed (or reprogrammed using the same procedure) for a phone number up to 16 digits Figure 18 - Telephone Keypad long. 3. Press PROG (Figure 17) once again. X 4. Press a memory button (Figure 16) to store this num
Resumen del contenido incluido en la página 17
Special Features Direct Audio Output The AUDIO OUTPUT socket allows you to connect the XL-25s audio output to an assistive listening devices. Figure 19 - Audio Output Socket To use this port, plug in a compatible auxiliary cable and connect it to your assistive listening device. Speak into the handset when you use the Audio Output connection. 14
Resumen del contenido incluido en la página 18
Specifications E Troubleshooting Chart N G L The chart below will help you I solve most problems that may Outgoing Volume Control S arise during operation of your 0 - 18dB H telephone. Should the difficulty continue, contact Clarity at (800) 426-3738 or your authorized deal- Incoming Volume Control er for assistance. 0 - 12dB Dimensions CAUSE AND 1 1 Size: 9 /2" x 7" x 3 /4" CORRECTIVE SYMPTOM Weight: 2.52 lbs. ACTION Check all phone No dial tone Power Requirements cord connections. One 9 Volt
Resumen del contenido incluido en la página 19
Regulatory Compliance line may result in the devices not Part 68 of FCC Rules ringing in response to an incoming Information call. In most but not all areas, the This equipment complies with Part sum of RENs should not exceed 68 of the FCC rules. On the bottom five (5.0). To be certain of the of this equipment is a label that number of devices that may be contains, among other information, connected to a line, as determined the FCC registration number and by the total RENs, contact the ringer eq
Resumen del contenido incluido en la página 20
Regulatory Compliance E (continued) N G L complaint with the FCC if you repairs, call (800) 426-3738. I believe it is necessary. Connection to party line service is S The telephone company may subject to state tariffs. Contact the H make changes in its facilities, state public utility commission, equipment, operations or procedures public service commission or that could affect the operation of corporation commission for the equipment. If this happens the information. telephone company will pr
