Manual de instrucciones de Extron electronic sXPA 2002-70V

Resumen del contenido incluido en la página 1

Product Category
XTRA™ Full Rack Series • Setup Guide
This guide provides basic instructions for an experienced installer to set up and operate the Extron XTRA Full Rack Series of
power amplifiers. All user guide references refer to the XTRA Full Rack Series User Guide.
• XPA 2002 outputs stereo audio at 200 watts rms per channel (4-ohm speakers) or 100 watts rms per channel (8-ohm
speakers) on channels 1 and 2. Output is 400 watts bridged mono (8-ohm speaker).
• XPA 2002-70V outputs 200 watts

Resumen del contenido incluido en la página 2

XTRA™ Full Rack Series • Setup Guide (Continued) 5. Bridge outputs (XPA 2002, XPA 2004, and XPA 4002) — Bridging the output of input 1 (XPA 2002 and XPA 4002) ON or inputs 1 and 3 (XPA 2004) doubles the output of those inputs (see “Bridged Mode Output” in the OFF user guide for further details). The bridge output mode toggle switch is shown at right. Bridge mode: XPA 2002 and XPA 4002 BRIDGE A Bridging takes the signal from input 1 and outputs the combined output of 400 watts (XPA