Resumen del contenido incluido en la página 1
VES-1000 Series
VDSL-Ethernet Switches
May 2002
Version 3.40
Hardware Installation Guide
Resumen del contenido incluido en la página 2
VES-1000 Series Ethernet Switch Copyright VES-1000 Series of VDSL-Ethernet Switches Copyright © 2002 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corpo
Resumen del contenido incluido en la página 3
VES-1000 Series Ethernet Switch ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase. During the warranty period and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective products or components without charge for e
Resumen del contenido incluido en la página 4
VES-1000 Series Ethernet Switch Customer Support If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation offices worldwide, in one of the following ways: Contacting Customer Support When you contact your customer support representative, have the following information ready: ♦ Model and serial number. ♦ Warranty information. ♦ Date you received your product. ♦ Brief description of the problem and the steps you took to solve it. M
Resumen del contenido incluido en la página 5
VES-1000 Series Ethernet Switch Table of Contents Copyright....................................................................................................................................................................................... ii ZyXEL Limited Warranty ............................................................................................................................................................. iii Customer Support ..............................................
Resumen del contenido incluido en la página 6
VES-1000 Series Ethernet Switch 4.1 Rear Panel Connections............................................................................................................................4-1 4.1.1 Power Cord........................................................................................................................................4-1 4.2 Front Panel Connections ...........................................................................................................................4-2
Resumen del contenido incluido en la página 7
VES-1000 Series Ethernet Switch List of Figures Figure 1-1 Building Deployment Example Using a VES-1012...................................................................................................1-2 Figure 1-2 Enterprise Application Using a VES-1012 ................................................................................................................1-3 Figure 1-3 VES-1012 Example of a Campus Application Using a Gigabit switch ..............................................
Resumen del contenido incluido en la página 8
VES-1000 Series Ethernet Switch List of Diagrams Diagram 1 Removing the Power Cord .......................................................................................................................................... A Diagram 2 Opening the Fuse Housing ...........................................................................................................................................B Diagram 3 Fuses in the Fuse Housing............................................................
Resumen del contenido incluido en la página 9
VES-1000 Series Ethernet Switch Preface Congratulations on your purchase from the VES-1000 Series of VDSL-Ethernet Switches. This guide shows you how to set up the hardware for your VES-1000 Series Switch. About VDSL VDSL (Very high bit rate Digital Subscriber Line) is one type of DSL with very high data rates. The service can be asymmetrical or symmetrical and can be used on the same wire as the POTS (Plain Old Telephone Service) network and ISDN. About the VES-1000 Series The VES-
Resumen del contenido incluido en la página 10
Resumen del contenido incluido en la página 11
VES-1000 Series Ethernet Switch Chapter 1 VES-1000 Series Switch Applications This chapter describes the applications and basic operating environment for the VES Ethernet Switches. 1.1 Applications The VES-1008 supports 8 VDSL ports as well as a combined USER/CO Telco connector. Expanding on this flexibility, the VES-1012 features 12 VDSL ports as well as separate CO and USER Telco-50 connectors. The applications and operating environment (and associated diagrams) presented in this
Resumen del contenido incluido en la página 12
VES-1000 Series Ethernet Switch Figure 1-1 Building Deployment Example Using a VES-1012 1.1.2 Enterprise Application The VES-1000 Series of switches can also be used in enterprises to multiplex employee traffic to the Internet. 1-2 Applications
Resumen del contenido incluido en la página 13
VES-1000 Series Ethernet Switch Figure 1-2 Enterprise Application Using a VES-1012 1.1.3 Campus Applications Independent networks can also have traffic multiplexed to a gigabit switch or fiber ring using a VES-1000 Series switch. Applications 1-3
Resumen del contenido incluido en la página 14
VES-1000 Series Ethernet Switch Figure 1-3 VES-1012 Example of a Campus Application Using a Gigabit switch Figure 1-4 VES-1012 Example of Campus Application Using a Fiber Ring 1-4 Applications
Resumen del contenido incluido en la página 15
VES-1000 Series Ethernet Switch Chapter 2 Hardware Installation This chapter shows you how to install the VES-1000 Series switch in a free-standing, rack-mounted or wall mounted scenario 2.1 Operating Environment The following is the recommended environment for both the VES-1008 and VES-1012 Ethernet switch. Operating Environment • Temperature: 0ºC — 50ºC • Humidity: 5% — 95% Storage Environment • Temperature: -25ºC — 70ºC • Humidity: 5% — 95% Refer also to the Hardware Spec
Resumen del contenido incluido en la página 16
VES-1000 Series Ethernet Switch • Make sure the position of the VES-1008 does not make the rack unstable or top-heavy. Take all necessary precautions to anchor the rack securely before installing the unit. Step 1. Position a mounting bracket on one side of the VES-1008, lining up the four screw holes on the bracket with the screw holes on the side of the unit (Figure 2-1). Failure to use the proper screws may damage the unit. Step 2. Using a #2 Philips screwdriver, install the M3 flat he
Resumen del contenido incluido en la página 17
VES-1000 Series Ethernet Switch Figure 2-2 Mounting the VES-1008 in a Rack 2.2.3 Wall Mounted The VES-1008 is designed so that it can be mounted on a wall if the need arises. The following is needed in order to mount the VES-1008 on a wall: • Two mounting brackets (supplied). • Eight M3 flat head screws (supplied) and a #2 Philips screwdriver. • Four M5 flat head screws and a #2 Philips screwdriver. Before you mount the VES-1008, please take note of the following precautions: P
Resumen del contenido incluido en la página 18
VES-1000 Series Ethernet Switch Figure 2-3 Attaching the Wall-mounting brackets to the VES-1008 Step 2. Using a #2 Philips screwdriver, install the M3 flat head screws that came with the brackets through the mounting bracket holes into the VES-1008. Step 3. Repeat Step 1 and Step 2 to install the second mounting bracket on the other side of the unit. You may now mount the VES-1008 on the wall. Step 4. Position the VES-1008 flat against the wall and screw the mounting brackets directly
Resumen del contenido incluido en la página 19
VES-1000 Series Ethernet Switch • Eight M3 flat head screws (supplied) and a #2 Philips screwdriver. • Four M5 flat head screws and a #2 Philips screwdriver. Before you proceed with mounting the VES-1000 Series switch in a rack, please take note of the following precautions: Precautions: • Make sure the rack will safely support the combined weight of all the equipment it contains. • Make sure the position of the VES-1012 does not make the rack unstable or top-heavy. Take all necess
Resumen del contenido incluido en la página 20
VES-1000 Series Ethernet Switch Figure 2-5 Mounting the VES-1012 in a Rack 2-6 Hardware Installation
