Resumen del contenido incluido en la página 1
INSTALLATION INSTRUCTIONS
D5RH
DIGI-5 DDS Digital Distribution System
Rack Mount 4 Source, 4 Zone Hub
08905153B - 1 -
Resumen del contenido incluido en la página 2
Safety Information CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation p
Resumen del contenido incluido en la página 3
Damage Requiring Service — These appliances should be serviced by qualified service personnel when: • A power supply connection or a plug has been damaged or • If liquid has been spilled into the appliance or objects have fallen into the appliance or • The appliance has been exposed to water or moisture or • The appliance does not appear to operate normally or exhibits a marked change in performance or • The appliance has been dropped or the enclosure damaged. Replacement Parts — When
Resumen del contenido incluido en la página 4
1. Introduction Modern Convenience The D5RH 4 Source, 4 Zone Digital Audio Distribution Hub with DIGI-5 Technology and related products from Xantech provides the ability to listen to 4 different audio sources in up to 28 separate zones of the home, all over CAT-5 wiring for total flexibility and convenience. No need to have multiple audio systems in different areas, just select a source from one of Xantech’s premium in-wall keypads, sit back and enjoy! Crystal Clear Digital Sound E
Resumen del contenido incluido en la página 5
Features • 4 Source, 4 Zone Capacity • Expandable up to 28 Zones with Optional D5XH Digital Audio Distribution Expansion Hub • End-to-End Digital Architecture for Crystal Clear Sound with No Signal Loss • Simple CAT-5 Wiring requirements • Innovative D5KP Amplified Keypad (not included) • Provide Custom Control Options • No PC Software Required For Setup – Simply plug in the D5KP and go • Optional D5MR – Mini Remote and D5LR – Advance Learning Remote for added control features a
Resumen del contenido incluido en la página 6
Defining Terms Zone A Zone is defined as an area of the house that has separate source selection capabilities from all other areas of the house. Typically, a zone is comprised of a single room, but it is possible for a zone to spread across multiple rooms (kitchen/dining room, master bedroom/master bath) or for multiple zones to be contained in one room (game room/bar area or multiple zones in the yard). Source A Source is any audio (or audio/video) device that is connected to the SOU
Resumen del contenido incluido en la página 7
Rear Panel The Rear Panel of the D5RH has connections for Power, Source Inputs, Zone Outputs, IR Outputs, Page/Doorbell Trigger Input, Auxiliary Power, USB and Expansion capabilities as well as Digital/Analog Source Selection, Source Input Gain and Zone Pairing DIP Switches. 18 1 3 1 1 3 1 7 8 10 13 16 2 3 2 2 4 3 2 4 5 6 9 11 12 14 15 17 Figure 1.2: D5RH Rear Panel Connector Function Connect digital audio sources using Digital 1 Digital Coaxial Audio Input Coaxial cable Conne
Resumen del contenido incluido en la página 8
2. System Design Overview/Applications Planning Before installing the D5RH, it is essential to have a detailed and accurate system design. The first step to a good design is to map the system. It is advisable to mark up a copy of the house floor plan with speaker, keypad and equipment locations, etc. Make sure that all locations are decided upon before pre-wiring so that all necessary wiring and installation hardware is in place. It is essential that ALL system components are account
Resumen del contenido incluido en la página 9
Pre-Construction In a pre-construction installation, walls and ceilings are open with no drywall installed. This is desirable and allows the installer greater access than in retro-fit applications. Before actually running any wire or cable, take the time to look around each room or area of the house and plan your wire paths for maximum efficiency. Look for routes through uncluttered parts of the stud wall or ceiling that allow you to group all low-voltage (video, speaker wires, CAT-5, t
Resumen del contenido incluido en la página 10
Pre-Wiring D5RH Digital Audio Distribution Hub to D5KP Amplifier Keypad The D5RH and all associated components are wired using CAT-5 terminated to the T-568A Wiring Standard (Figure 2.2). When pre-wiring, run lengths of CAT-5 from the pre-determined equipment location (the “head-end”) to each Amplifier Keypad location. The CAT-5 routes all audio, power, IR and status information needed for full system operation. Note: For maximum performance over long runs (more than 150 ft) run an a
Resumen del contenido incluido en la página 11
Applications There are three typical system applications when installing the D5RH. These options can be combined throughout a system depending on the design of the system: 1 Basic 4 Source, 4 Zone System 2 Basic 4 Source, 4 Zone System - Local Sources connected using D5IP Source Input Wall Plates 3 Expanded 4 Source, 8-28 Zone System - Local Sources connected using D5IP Source Input Wall Plates Basic 4 Zone, 4 Source System Figure 2.3 shows a basic D5RH system with four sources and f
Resumen del contenido incluido en la página 12
Basic 4 Zone, 4 Source System w/ Local Sources Local Sources Connected Using DHIP Local Source Wall Plates Figure 2.4 shows a basic D5RH system with four sources and four zones with the addition of Local Sources in two of the zones. Each zone can have one local source. The system is comprised of a D5RH Digital Audio Distribution Hub, D5KP Amplified Keypad, D5IP Source Input Wall Plates and Xantech XTC Speakers. This configuration provides audio from each source into each zone as well a
Resumen del contenido incluido en la página 13
Expanded 4 Source, 8-28 Zone System D5XH Expansion Router Figure 2.5 shows an expanded system with four sources and ten zones with the addition of Local Sources in four of the zones. Each zone can have one local source. The system is comprised of a D5RH Digital Audio Distribution Hub, D5XH Expansion Hub, D5KP Amplified Keypad, D5IP Local Source Wall Plates and Xantech XTC Speakers. This configuration provides audio from each source into each zone as well as control of each source from
Resumen del contenido incluido en la página 14
3. Connections The D5RH is part of an integrated system that requires the use of other components. Depending on the system design, these components may include: • D5KP Amplified Keypad - at least one per zone required • D5IP Source Input Wall Plates - one per zone where a Local Source is desired • D5XH Expansion Hub - for systems containing from 5 to 28 zones (each D5XH add up to six zones) • Xantech Outdoor, Ceiling and In-Wall Speakers • Xantech IR Emitters and accessories Thi
Resumen del contenido incluido en la página 15
Digital Coaxial (DIG COAX) Use a Digital Coaxial cable to connect an audio source with a Digital Coaxial output to the D5RH’s Source Input as shown in Figure 3.2. NOTE: Make sure to put the COAX/OPT switch in the COAX (up) position. Digital Connections provide the best audio quality and should be used if available. If both a Digital Coaxial connection and a Digital Optical connection are present on the audio source, use only one. DO NOT connect both Coaxial and Optical outputs to the D5
Resumen del contenido incluido en la página 16
Source Loop Outputs (SOURCE LOOP OUT) The Source Loop Outputs are used only when adding D5XH Expansion Hubs to the D5RH in order to create more than four zones. These connectors carry Audio, Status and IR information between the units and allow seamless functionality in all areas of the home with no complicated cross-wiring, splicing or specialized adapters needed. When adding a D5XH Router, simply connect CAT-5 Patch Cables from the ‘SOURCE LOOP OUT’ of the D5RH to the ‘SOURCE LOOP IN’
Resumen del contenido incluido en la página 17
D5-NET This connector is reserved for future implementation of two-way data sources and communication. EXPANSION OUT Connect the CAT-5 Patch Cable from the D5RH ‘EXPANSION OUT’ port to the D5XH ‘EXPANSION IN’ port as shown. Complete connections for expanded systems are described in the section entitled Multi-Chassis Connections. D5XH D5RH Cat-5 Ethernet Patch Cable Figure 3.5: Expansion Outputs 08905153B - 17 -
Resumen del contenido incluido en la página 18
IR OUT/ALL IR OUT Xantech D5KP Amplified Keypad feature a built-in IR Receiver that is used to control the sources connected to the D5RH using hand-held remotes. The four IR ports labeled 1-4 are Source-Specific. When a particular source is selected in a zone, the corresponding IR port is active and only the selected source receives IR. This allows for same-branded or identical source components to be controlled discreetly from one location without conflict. The ALL IR PORT is constan
Resumen del contenido incluido en la página 19
ZONE OUT The ‘ZONE OUT’ RJ-45 connector’s interface with D5KP Amplified Keypad through CAT-5 cables wired to the T-568A Standard. These connectors carry IR information from the keypad as well as audio information to the D5KP Amplifier Keypad. Status information is also carried between the D5RH chassis and the Amplifier Keypads. While a great deal of information is handled by the ‘ZONE OUT’ connections, the connections are straightforward. Simply connect CAT-5 cables terminated to the
Resumen del contenido incluido en la página 20
D5KP Speaker Connections The D5RH routes digital audio to connected D5KP Amplifier Keypad where the audio is then amplified and sent to in-room speakers. WARNING!: The D5KP’s amplifier is capable of powering a single pair of 8-6 Ohm speakers. DO NOT connect speakers with a rating of less than 6 Ohms! DO NOT connect more than one speaker to either speaker connector of the D5KP. In doing this, damage to the D5KP may occur and will void the products warranty. To connect speakers to D5
