Manual de instrucciones de Shure Split Bar Kit RK199S

Resumen del contenido incluido en la página 1

Model RK199S User Guide
SPLIT BAR SWITCH KIT
The Shure Model RK199S Split Bar Switch Kit is designed to
Transmit Label 28A366
enable users of Shure base station microphones to monitor a
Monitor Label 28B366
communications channel by disabling the receiver squelch circuit
before transmitting. Once installed, the microphone Transmit
Lubriplate Capsule 90MF1371
switch can be depressed only while the Monitor switch is
1
/ ” No. 4 Phillips Head Self-Tapping 30E689A
2
depressed. The Monitor switch c

Resumen del contenido incluido en la página 2

5. Remove the two screws securing the present switch stack and carefully move the switch stack to one side. Attach the right-angle bracket to the switch mounting plate using 5 a / ” screw and the single mounting plate hole next to 16 the switch stack screw holes. The long “tail” of the coil spring on the Transmit bar must be in front of the right–angle bracket. The assembly should be such that the Transmit bar cannot be activated unless the Monitor bar has been depressed. NOTE: The other two hol