Manual de instrucciones de Q-Logic QLogicSB-RACKKIT

Resumen del contenido incluido en la página 1



 
    

 
 
                                 
 
SANbox 5000 Series Fibre Channel Switch
Rack Mounting Guide
Rail Kit SB-RACKKIT
2
1
3
3
3 5800V/5802V
4
5202/5602
5200/5600
1. Rack rail (2) 3. Screw, w/washer 10-32 x 3/8 in. (14)
a
2. Switch rail (2)
4. Washer, centering (8)
a For use only on racks with square holes.
Tools Required
Crosshead screw driver, medium
WARNING!!
Heavier products should be placed near the bottom of a rack or c

Resumen del contenido incluido en la página 2

SANbox 5000 Series Fibre Channel Switch Rack Mounting Guide D Install Switch Rails Install the switch rails on the switch using two screws to secure each rail. The switch can be mounted flush or with a 1.25 inch setback depending on how you match the holes. 2 1 3 1 2 1. Switch rails, flush mount 3. Screws, 10-32 x 3/8 2. Switch rails, with setback Install Rack Rails Extend the rack rails to fit the inner dimensions of the rack. The rail flanges on both ends fit inside the rack. Be sure tha