Manual de instrucciones de Q-Logic QLogic3800

Resumen del contenido incluido en la página 1

Rack Mounting Guide
Fibre Channel Switch
3800/5800 Series
Rail Kit SB-RACKKIT
5
4 8
6
7
6
1
6
2
3
1. QLogic 5800/5802 (shown rear-facing) 5. Switch rail (2)
2. QLogic 5802 (shown front-facing) 6. Screw, w/washer 10-32 x 3/8 in. (14)
a
3. QLogic 3810 (shown rear-facing)
7. Washer, centering (8)
4. Rack rail (2)
8. Rack front
a
For use only on racks with square holes.
This guide describes how to mount the QLogic 3810 and 5800V Series Fibre Channel switches in a
rack using the rail kit (SB-RACKKI

Resumen del contenido incluido en la página 2

3800/5800 Series Fibre Channel Switch Rack Mounting Guide Install Switch Rails Install the switch rails on the switch using two screws to secure each rail. The switch can be mounted flush or with a 1.25 inch setback depending on how you match the holes. Install Rack Rails 2 1 Decide which direction you want the switch ports to face: toward the front or toward the rear of the rack. The following instructions show a rear- 3 facing installation. 1 2 1. Switch rails, flush mount 3. Screws, 10-