Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
IMPORTANT NOTICE IMPORTANT RECORD THE MODEL NUMBER AND SERIAL NUMBERS OF THIS EQUIPMENT BELOW. THE NUMBERS ARE ON THE REAR. CAUTION TAD-M600 RISK OF ELECTRIC SHOCK MODEL NO. DO NOT OPEN SERIAL NO. The lightning flash with arrowhead symbol, CAUTION: The exclamation point within an equilateral KEEP THESE NUMBERS FOR FUTURE USE. within an equilateral triangle, is intended to TO PREVENT THE RISK OF ELECTRIC triangle is intended to alert the user to the D1-4-2-6-2*_A1_En alert the user to the prese
Resumen del contenido incluido en la página 3
IMPORTANT NOTICE IMPORTANT RECORD THE MODEL NUMBER AND SERIAL NUMBERS OF THIS EQUIPMENT BELOW. THE NUMBERS ARE ON THE REAR. CAUTION TAD-M600 RISK OF ELECTRIC SHOCK MODEL NO. DO NOT OPEN SERIAL NO. The lightning flash with arrowhead symbol, CAUTION: The exclamation point within an equilateral KEEP THESE NUMBERS FOR FUTURE USE. within an equilateral triangle, is intended to TO PREVENT THE RISK OF ELECTRIC triangle is intended to alert the user to the D1-4-2-6-2*_A1_En alert the user to the prese
Resumen del contenido incluido en la página 4
We Want You Listening For A Lifetime Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association’s Selecting fine audio equipment such as the unit Consumer Electronics Group recommend you avoid you’ve just purchased is only the start of your prolonged exposure to excessive noise. This list of musical enjoyment. Now it’s time
Resumen del contenido incluido en la página 5
CONTENTS We Want You Listening For A Lifetime Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer Thank you for buying this TAD product. Please read through these operating instructions so you will know how to operate and the Electronic Industries Association’s your model properly. After you have finished reading the instructions, put them away in a safe place
Resumen del contenido incluido en la página 6
INTRODUCTION Inspiring the joy of listening Technical Audio Devices Laboratories, Inc. (TADL) grew from the spirit to discover technologies to perfectly recreate the pure sound of live performances with uncompromising craftsmanship. We have inherited our philosophy from Bart Locanthi— recognized across the globe as the ultimate sound technologist—who believed that genuine technology is true to the basics and that genuine technology places greater importance on sound quality than on technology
Resumen del contenido incluido en la página 7
BEFORE yOU START Checking what’s in the box Please check that you have received the following supplied accessories in the accessory box. ' Power cord x 1 ' Hexagon wrench x 1 ' Spike base template x 1 ' Spike bases x 4 ' Operating Instructions (this document) Controls and displays Front panel Rear panel INPUT (BALANCED) A SPEAKERS B CLASS 2 WIRING OFF ON 2 1 3 4 5 1. Power indicator 3. INPUT terminal (BALANCED) Indicates whether the power is turned on or off. The indicator Connect to Pre-Amplifi
Resumen del contenido incluido en la página 8
INSTALLATION AND CONNECTIONS Installation WARNING As the TAD-M600 is a large and heavy unit, make sure to move, unpack and install with four or more people. ' When installing, choose a level and flat surface that can sufficiently withstand the weight of this unit. Failure to do so ' could cause the unit to fall, resulting in an accident. It is recommended that the TAD-M600 be installed directly on a solid floor surface. If installed on a shelf, the user is responsible for confirming that
Resumen del contenido incluido en la página 9
CLASS 2 WIRING INPUT (BALANCED) A SPEAKERS B CLASS 2 WIRING Adjusting the spike height 1. Remove the cover on the rear right leg of the TAD-M600 as indicated below. 2. Insert the provided hexagon wrench and adjust the spike height so that the TAD-M600 does not wobble. 3. Replace the cover removed in step 1. TAD-M600 9
Resumen del contenido incluido en la página 10
Connecting your equipment CAUTION Do not turn on the power switch to the TAD-M600 or the other components until all connections have been completed. ' We recommend that you place the speakers at the desired location before performing connections. Use commercially available speaker cables for connections. When connecting other components, make sure to turn the power off and unplug the other components before connecting. TAD-M600 INPUT (BALANCED) A SPEAKERS B CLASS 2 WIRING To balance output
Resumen del contenido incluido en la página 11
Bi-wire connection The bi-wire connection uses two speaker cables on one amplifier to connect to the speaker’s low-frequency input terminal and high-frequency input terminal. In order to connect speakers to this unit using a bi-wire connection, the speakers must be bi-wiring compliant. Align the High and Low wires correctly to connect. [An example of connections made to a speaker system with bi-wire connection terminals] Pre-Amplifier To balance output terminal To balance output terminal TAD-
Resumen del contenido incluido en la página 12
Connecting to the speaker system CAUTION ' The input terminals of speaker systems have a negative (–) pole and a positive (+) pole. Make sure to align these poles correctly when connecting to the speaker terminals of the TAD-M600. ' Make sure to use speakers with an impedance of 4 Ω to 16 Ω. ' Use speaker cables with a large electrical capacity and make sure no warps or shorts are present. Using speaker cables with a small electrical capacity or making imperfect connections could affect the
Resumen del contenido incluido en la página 13
Connecting the power cord Once all connections have been made, plug in the power cord to a power outlet (AC 120 V). • Although the power cord to the TAD-M600 is removable, do not attempt to use a power cord other than the supplied cord. • Connect the power plug to a power outlet and turn the power switch on to power up the TAD-M600. Upon power up, there will be an eight second mute period. While muted, the power indicator will light red. The power indicator will turn yellow once the TAD-M600
Resumen del contenido incluido en la página 14
TO BEgIN PLAyBACk Before turning on the power Make sure that the input terminals and output terminals are securely connected. Playback 1. Turn the volume knob of the Pre-Amplifier to its lowest setting. 2. Turn the Pre-Amplifier’s power on. 3. Turn the TAD-M600’s power on. The power indicator will light red for eight seconds. The light will turn yellow once the TAD-M600 is ready to operate. Use the Pre-Amplifier’s volume knob to adjust the volume. 4. To turn off the unit after use, first turn th
Resumen del contenido incluido en la página 15
TROUBLESHOOTINg Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your dealer. Symptom Possible cause Remedy Power does not turn ' The power plug is not connected to the ' Firmly p
Resumen del contenido incluido en la página 16
SPECIFICATIONS Amplifier Section # Power output ...................................................................................................................600 W (20 Hz to 20 kHz, T.H.D., 0.2 %, 4 Ω) 300 W (20 Hz to 20 kHz, T.H.D., 0.2 %, 8 Ω) Rated distortion ........................................................................................................Less than 0.03 % (20 Hz to 20 kHz, 300 W, 4 Ω) Signal-to-Noise Ratio (IHF, short circuited, A network) ......................
Resumen del contenido incluido en la página 17
To ensure long product life, avoid installing this unit in the following locations: • Locations exposed to direct sunlight. • Humid or poorly ventilated areas. • Areas of extreme temperatures. • Areas with vibration. • Dusty or smoky areas. • Areas exposed to grease fumes, steam or heat (such as a kitchen). Maintenance Use a dry polishing cloth to wipe off dust and dirt. If the surface is extremely dirty, wipe with a soft cloth dipped in neutral cleanser diluted five to six times with water and
Resumen del contenido incluido en la página 18
Published by Pioneer Corporation. Copyright © 2009 TECHNICAL AUDIO DEVICES LABORATORIES, INC. All rights reserved. TECHNICAL AUDIO DEVICES LABORATORIES, INC. 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan Printed in Japan <09G00001>
