Resumen del contenido incluido en la página 1
ELECTRONIC MOhJLAR SWITCHING SYS,TEM
Panasonic
Please read this manual before connecting the KX-T61610.
Quick Reference Card for Standard Telephone can be found on pages.+22 through 6-29. _ .
Resumen del contenido incluido en la página 2
Thank you for purchasing the Panasonic Model KX-T61610, Electronic Modular Switching System (EMSS). System Component Description Model No. Service unit KX-7-61610 Electronic Modular Switching System EMSS Proprietary Telephotle- Telephone KX-T61620 EMSS Proprietary Telephorze with LCD KX- 7-61630 EMSS Proprietary Telephone KX- T61650 DSS Console Optional KX- T61640 equipment KX-T30860D(only) Doorphone Adaptor ..___ KX- T30865 Doorphotze KX- T30890 Headset KX-Al6 System Back-up U
Resumen del contenido incluido en la página 3
NOTIFY THE TELEPHONE COMPANY Installation must be performed by the telephone company or a qualified professional installer. Notify the Telephone Company Before connecting this equipment to any telephone, call the telephone company and inform them of the following: ;.’ ), l FCC Registration No. . . . . . . . . . . . . . . . . . . . foul ‘1, .‘* Ringer Equivalence . . . . . . . . . . . . . . . . . . . . . . : : . . : . . ,. . . l Facility Interface Code . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 4
TABLE CiF CONTENTS ’ Name and Location ........................................... .2-1 Installation ...................................................... .2-2 ..................................................... .2-4 Connection .2-5 Frame Growld Cotmectiotl ...................................... Rechargeable Barfery ltlslallariotz .................................. 2-5 .............................. Cotltzecrion of The Central Ofice Litle 2-6 Connection of the Extension (for Proprie
Resumen del contenido incluido en la página 5
............... with 1 Programmable Toll Prefix ....... 3-22 Programmable Operator Cull .......... .- 3-23 has been added ....... no restrict 3-24 Programmable Directory Assistance ....... Automatic Answering (AutomaticlManual) Selection . . Auto Amwer ....... 3-25 Host PBX Access Codes Assignment 3-26 has not been ....... stored Preferred CO Line Assignment. ........... non-assignment ...... .3-27 ............. Programmable Call Waiting has been removed ...... ‘3-28 ...........
Resumen del contenido incluido en la página 6
When a Line is Busy .......................... 4-7 Automatic Call Back Busy-(Camp-on) Busy Station Sigtlaling ...................................... 4-8 Last Number Redial .......................................... 4-8 To Receive Calls Answer. ........................ . . . . . . . . . . . . . . . . . . . 4-9 . . . . . . Automatic Answer-Intercom ....... . . . . . . . . . . . 4-9 . . . . Dial Call Pickup ................. . . . . . . . . . . . 4-10 . . . . . . Directed Call Pickup ..
Resumen del contenido incluido en la página 7
Station Programming Dial Call Pickup Detly , . . . . . . . . . . . . . . . . 4-34 Call Forwarding . . . . . . . . . . . ...... 4-35 Do tlot Disturb . . . , . . . . . . . . . . . . . . . . . . . ...... 4-37 Data Litle Seclrrity . . . . . . . . . . . . . . . . ...... 4-35 . . . . . Saved Nwnber Redial . . . . . . . . ...... 4-38 Flexible Nighr Service . . . . . . . . . . . . . . . . . ...... 4-39 Statioti Program Clear . . . . . . . ...... 4-40 Operation for a Standard Teleph
Resumen del contenido incluido en la página 8
NAME AND LOCATION : Night ltldicator Day Indicator External Music Jack Power Indicator Burtotl B Ground Terminal Buttery Backup Cotztlecio EIA Cotmector (RS-232 C) Push Buttons A and B simultaneously to open Front Cover. y-Jtariotl Modular Jacks IT-I 3 Outside Modular- 1 7 Jacks (CO) 0 Reset Button “I System Program Switch I 0 L-zz- *Power SwiWh -- 0
Resumen del contenido incluido en la página 9
INSTALLATION Installation Cautions *Avoid insralling in the following places. (Doing so may resulr in malfunction, noise, or discoloration.) 1. In direct sunlighr and her, cold, or humid places. (Temperarure range: 32”F-104°F) 2. Sulfuric gases produced .in areas where there are thermal springs, etc. may damage the equipment or contacls. 3. Places in which shocks or vibrations are frequent or strong. 4. Dusty places, or places where water or oil may come into contact with the unit. 5. N
Resumen del contenido incluido en la página 10
The wall where the KX-T61610 is to be mounted must be able to support a weight of KX-T61610. If screws other than the ones supplied are used, use the same-sized diameter screws as the enclosed ones. ------- _________ ----a--------------- ____ To Wall Mount: To Mount on Concrete or Mortar Walls: 1. Place the templet (included) on the wall to mark the 3 screw positions. 1. Place the templet (included) to mark 3 screw I 1 positions. 2. Drill 3 holes and drive the anchor plugs (in- cluded
Resumen del contenido incluido en la página 11
CONNECTION After all the connections are completed, turn the Power Switch ON. If an extension does not operate properly (for example: The LCD of the KX-T6163Ol KX-T30830 does not display properly.), disconnect the telephone from the ejctension line and then connect again, or turn OFF Speflker Amplifier the power switch of the KX-T61610 and then ON again. Opriotlai Sysrem Back-up Unit (KX-A16) (Two pair) Printer Doorphotw I of tile KX-T616301 KX- T6162Of KX- T6165Ol 16 Esretlsio
Resumen del contenido incluido en la página 12
IMPORTANT!!! Surely connect the frame of the KX-T61610 to earth ground properly to protect the unit. Fig. . /TV / 1. Remove the battery cover from the compartment. (Fig. 1) 2. Connect the battery (included). (Fig. 2) 3. I~tstall the battery i,lto the battery compartment. (Fig. 3) *Replace the battery every 5 years with (P-OlH- FIGI). To remove comlector. depress to release a,ld slide (pull) apart connector. (Fig. 2)
Resumen del contenido incluido en la página 13
1. Insert the modular plug of the tele- phone line cord (2-conductor wir- ing) into the modular jack (marked CO) on the KX-T61610. 2. Place the six telephone line cords into Holder. - R: Ring RT T: Tip Holder - (see srep 2) View of TEL Jack (CO) . B u Use 2-condrccror !! lcirirlg cord. To Terminal Board or Modular Jacks from the Coltral Office (CO). Caution Mis-connection may cause the KX-T61610 to operate improperly. See “During Installation” page 6-l and “During Connection
Resumen del contenido incluido en la página 14
I. Insert the modular plug of the exten- sion line cord (6conductor wiring) into the modular jack (markeci EXT.) on the KX-T61610. 2. Place the cords into Holder. R: Ring L RTH T: Tip Holder - L: Low (see step 2 H: High View of TEL Jack (extension) B c A -----4-conductor wiring is required for each extemion. To Extensions l The inner 2 wires (red, green) are for Tip and Ring and the outer 2 wires (black and yellow) are for LOW and Hi (DA TA). l The max. length of the extens
Resumen del contenido incluido en la página 15
1. Insert the modular plug of the exten- sion line cord (2-conductor wiring) into the modular jack (marked -I -- EXT.) on the KX-T61610. b 2. Place the cords into Holder. k \ Outer Z pins (Low and High) will not be Itsed for Standard Telephone. Holder , (see srep 2) R: Ring T: Tip Vie)%’ of TEL Jack (extension) Use 2-conducior ltniring - To Extensions *The max. length of the extension line cord that connects the KX-T61610 and the extension is shown below. 26 AWG: Under 2290 f
Resumen del contenido incluido en la página 16
Pair Telephone The DSS Console, KX-T61640 needs its Pair Telephone (EMSS Proprietary Telephone) for the operation, becaus’ the DSS console cannot work by itself. The EMSS Proprietary Telephone (such as KX-T61620, KX-T61630, KX-T61650, KX-T30820, KX-T30830, KX-T308SO) is required as a pair telephone for dialing, storing, etc. Place the KX-T61640 and the pair telephone side by side on your desk. 1. Insert the modular plug of the esten, sion line cord (4-conductor wiring, into the modular j
Resumen del contenido incluido en la página 17
Example: If y§-e&my has KX-T61630 at exrension 12 and is to use the DSS console (KX-T61640), rhe console should be connecled to extension 13. (Paired extension is ext. 12). 1. Connect the KX--61630 at extension 12. 2. Connect the KX-T61640 at extension 13. eFor use the KX-T61640, program should be done. Refer to “DSS Console Assignment” page 3-8. Extetlsion 12 KX- T61630 WKX-T61640 To Use Full Extensions When the DSS {1 . Console is Connected H KX-T61610 has 16 extensions. Bu
Resumen del contenido incluido en la página 18
Use a two- conductor pluo !r) (?+a inch in dizmete ehput impeda tnce 111 I J -10 dBm iaf Music Source Exterr cord that has II an interna resistance Speaker , \ Amplifier Use an RCA connector. eOutpur impedance: 3-11
Resumen del contenido incluido en la página 19
he KY-T30860D only). Adaptor (use ti . , lose the Optio/lal Doorphotle phone. For instaiiitlg the door Doorp/~orte Adaptor to the KX-T61610 1. f-few to install the -..-:nr,;r\,rr to the ho/es. 1 t .^,. t~.nt ;t lnckq itlto the ribs of the mit. 3” ‘,‘L‘L z. .--.-- @ posh the adnpror flown
Resumen del contenido incluido en la página 20
2. Wiring conneCtion of the Doorphone (A) Connect the doorphone adaptor to the terminal box using a 4-conductor modular -connector. (B) Connect the wires of doorphone 1 to the red and green screws of the terminal box. (C) Conrlect the tvires of doorphone 2 to the yellow and black screws of the terminal box. Doorphone Adaptor (KX-T30860D orlly) Terrniml Box Doorphone 2 (KX-T308t Doorphone I (KX-T30865) BLACK - @The max. length of the telephone line cord that connects the KX-T61610 and t
