Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
. this document. responsibility for any inaccuracies or errors that may appear in no change without notice. ATEN Technology assumes furnished here is for informational purposes only and is subject to information the information presented in this document. All ATEN Technology makes no warranty of any kind with regards to echnology, Inc. IOGEAR is a registered trademark of ATEN T ATEN is a registered trademark of ATEN Technology, Inc. Computer, Inc. of Apple Maci
Resumen del contenido incluido en la página 3
Packing List Packing List • KVM switch • - while G - • • - - Packing List Packing List to. damage to the unit and/or any devices it connects to prevent any procedures carefully in order thoroughly and follow the installation and operation , read the manual connecting your MiniView TM problem, please contact your dealer. Before included and nothing is damaged. If you discover a that all components are heck to make sure Please c AT adapters. PS/2 connectors, please c
Resumen del contenido incluido en la página 4
Contents Contents Introduction ……...…………...……... 01 01 Features ………………………………... 02 02 Hardware Requirements …………… 03 03 Installation …………………..………… 04 04 Operation ………………………….……. 06 06 Manual Port Selection HotKey Port Selection …………….………. 07 07 Auto Scan Mode ………………………….... 08 08 Next/Last Mode ……………………….……. 09 09 Appendix A ……………………………… 10 10 Specifications Appendix B ……………………………… 11 11 Troubleshooting Appendix
Resumen del contenido incluido en la página 5
Introduction Introduction - - T M - 1 1 Introduction Introduction rate connectivity solution from IOGEAR. yet another first ch, KVM swit We hope you enjoy using your MiniView TM constantly having to move from one PC to the other. asted effort involved in eliminate the inconvenience and w the extra space multiple consoles would take up, and PC. Additionally, these switches save all mouse for each expense of purchasing a separate keyboard, monitor and eliminates the attached
Resumen del contenido incluido en la página 6
Features Features Supports Microsoft IntelliMouse, Logitech MouseMan+, FirstMouse+, IBM Scroll Point Mouse and many others Keyboard and mouse em ulation for error free PC booting Hot pluggable – add or remove connected PCs without powering TM off the MiniView Full Plug - n - Play monitor support Caps Lock, Num Lock and Scroll Lock status is saved and restored when switching ports Supports video reso lutions up to 1920 x 1440 Easy installation - no software required
Resumen del contenido incluido en la página 7
Hardware Hardware Requirements Requirements Console One VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any PC in the installa tion One PS/2 mouse One PS/2 keyboard or One AT keyboard w/ a PS/2 keyboard adapter PC The following equipment must be instal led on each PC that is to be connected to the system: One VGA, SVGA or Multisync video card One PS/2 mouse port One PS/2 or AT k eyboard port * See the note under Cables in
Resumen del contenido incluido en la página 8
Installation Installation TM 1 unit. 2 - - 3 4 4 Installation Installation Turn on the power to the connected PCs. no extra charge. and we’ll be happy to provide one at please contact us AT adapter available, PC. If you don’t have a PS/2 adapter to the end of the cable that will connect to the AT connector for the keyboard port, connect a PS/2 . If your PC uses an AT style to the right diagram , as shown in the ports CPU PCs to the MiniView TM connect the monito
Resumen del contenido incluido en la página 9
Installation Installation... ... 5 5 Installation Installation
Resumen del contenido incluido en la página 10
Operation Operation TM - switc 6 6 Operation Operation tive. which port is ac The selected LED on the top panel will light up to indicate to switch between computers. anel of the MiniView side p TM button on the Selection Port With manual port selection, you simply press the Manual Port Selection different port. on a methods described below to switch to the active PC selection functioning. This is not the case. Simply use one of the port not monitor will be
Resumen del contenido incluido en la página 11
Operation Operation... ... ♦ ♦ ♦ For or , 2 - or ( 4 - 7 7 Operation Operation [Enter] 3. Press ropriate Port ID (1, 2, etc.) 2. Key in the app Ctrl + Alt + Shift 1. Press and release Port MiniView TM Right Ctrl + Right Ctrl) or Left Ctrl + Left Ctrl keyboard same side of the Note: The combination must be on the key twice. Right Ctrl Left Ctrl Press and release the niView Port Mi TM follows: combination as Hot Key the Port ID
Resumen del contenido incluido en la página 12
Operation... Operation... : TM 2 - w : key . TM 4 - : 1 2 0 3 8 8 Operation Operation g else. anythin in order to use the console for [Spacebar] by pressing the Auto Scan Mode keyboard keys will function. You must exit her is in effect, none of the ot Auto Scan Mode While Note: active. currently active at the time scanning stopped remains that was . The port Auto Scan Mode to exit [Spacebar] Once scanning begins, it continues until you press the [En
Resumen del contenido incluido en la página 13
Operation Operation... ... - 9 9 9 Operation Operation next computer in the configuration. switches to the RShift currently active one) while pressing ) switches to the previous computer (from the LShift key ( Left Shift is active, pressing the Last/Next Mode Once [Enter] 3. Press 2. Press and release Ctrl + Alt + Shift 1. Press and release combination: Hot Key wing the follo , key in Last/Next Mode after a fixed interval. To invoke , which switches Auto Scan M
Resumen del contenido incluido en la página 14
Appendix Appendix A A Port Selection Hot Keys /Port Selection Button - Selected - pin mini - - pin mini - - 15 VGA (F) - pin mini - DIN (F) PC Connectors - pin mini - - 15 VGA (F) Video Resolution 3 seconds LED Ac ti v ity M ean ing Power Consumption O ff Por t is not selected Housing Plastic Por t is not connected to an O n (steady) Operating Temperature active PC Storage Temperature - 20°C ~ 60°C Por t is connected to an active PC and is being Flashing (
Resumen del contenido incluido en la página 15
Appendix Appendix B B Problem Possible Cause Action MiniView , wait a few seconds and plug it TM TM The keyboard is . Power off TM needs to be reset. , wait a few seconds, not responding. TM w TM then reconnect it. be reset. TM needs to be reset. TM The MiniView does not support some combo mice (with extra buttons and wheels), The mouse is in an The mouse is unsupported mode. not responding. TM The MiniView - CS12 and G - CS14 were - to - serial mouse port
Resumen del contenido incluido en la página 16
Appendix Appendix C C - - - 12 12 Appendix C Appendix C info@iogear.com www.iogear.com 1262 Fax: (949) 250 2836 Toll Free: (888) 999 1260 Phone: (949) 250 Irvine, CA 92606 16560 Aston Street IOGEAR few ways to contact us. here are a or you wish to contact us for any other reason, fails to function properly, In the event that your MiniView TM Contacting IOGEAR
Resumen del contenido incluido en la página 17
Appendix Appendix D D 13 13 Appendix Appendix D D ease contact your direct vendor. For further inquiries pl notify any individual or entity of such revisions, or updates. or documentation without obligation to update the device The direct vendor also reserves the right to revise or particular purpose. erchantability, or fitness for any quality, performance, m or use of this documentation, and especially disclaims it’s d, or statutory with respect to the contents e
Resumen del contenido incluido en la página 18
IOGEAR 16560 Aston Street Irvine, CA 92606 Phone: (949) 250 - 1260 Toll Free: (888) 999 - 2836 Fax: (949) 250 - 1262 www.iogear.com info@iogear.com
