Resumen del contenido incluido en la página 1
HP ProCurve 2520G-PoE Switches
Installation and Getting Started Guide
Power over Ethernet
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
HP ProCurve 2520G-PoE Switches Installation and Getting Started Guide
Resumen del contenido incluido en la página 4
© Copyright 2009 Hewlett-Packard Development Disclaimer Company, L.P. HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, Publication Number performance, or use of this material. 5992-4975 The information co
Resumen del contenido incluido en la página 5
Contents 1 Introducing the Switch Front of the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Network Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Port LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 LED Mode Selec
Resumen del contenido incluido en la página 6
6. Installing or Removing mini-GBICs . . . . . . . . . . . . . . . . . . . . . . . . . 2-18 Installing the mini-GBICs: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18 Removing the mini-GBICs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 Connecting Cables to mini-GBICs . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 7. (Optional) Connect a Console to the Switch . . . . . . . . . . . . . . . . . . 2-20 Terminal Configuration . . . . . . . . . . .
Resumen del contenido incluido en la página 7
HP Customer Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13 Before Calling Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13 A Specifications Switch Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Electrical . . . . . . . . . . . . . . . . . .
Resumen del contenido incluido en la página 8
Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8 Korea . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-9 Taiwan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-9 European Community . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-10 D Recycle Statements Waste Electrical and Electron
Resumen del contenido incluido en la página 9
1 Introducing the Switch The HP ProCurve 2520G-PoE Switches are multiport switches that can be used to build high-performance switched workgroup networks. These switches are store-and-forward devices that offer low latency for high-speed networking. The 2520G-PoE switches also support Power over Ethernet (PoE) technologies. HP ProCurve 2520G-8-PoE Switch (J9298A) HP ProCurve 2520G-24-PoE Switch (J9299A) Throughout this manual, these switches will be referred to as the Switch 2520G-8-PoE and
Resumen del contenido incluido en la página 10
Introducing the Switch Dual-personality ports use either the 10/100/1000Base-T RJ-45 connector, or a supported ProCurve mini-GBIC (Small Form Factor Pluggable (SFP)) for fiber-optic connection. By default, the RJ-45 connectors are enabled. These switches can be directly connected to computers, printers, and servers to provide dedicated bandwidth to those devices, and you can build a switched network infrastructure by connecting the switch to hubs, other switches, or routers. In addition, t
Resumen del contenido incluido en la página 11
Introducing the Switch Front of the Switch Front of the Switch Power, Test and Status HP ProCurve 2520G-8-PoE Switch (J9298A) Switch port LEDs Fault, and LEDs Locator LEDs 1 Reset and Clear Console LED Mode select button 10/100/1000Base-T RJ-45 ports Dual-personality ports 2 buttons Port and indicator LEDs (1000Base-T and mini-GBIC) Power, Fault, HP ProCurve 2520G-24-PoE Switch (J9299A) Switch port LEDs PoE, Fan and Test and Locator Status LEDs LEDs Dual-personality ports 1 Reset and C
Resumen del contenido incluido en la página 12
Introducing the Switch Front of the Switch LEDs On the 2520G-PoE switches, there are three groupings of LEDs: ■ switch status LEDs (Table 1-2) ■ port LEDs (Table 1-3) ■ Port LED Mode indicator LEDs (near the selector button) (Table 1-4) Table 1-2. Switch Status LEDs Switch LEDs State Meaning Power On The internal power supply is working properly. (green) Off No power connection. The switch is NOT receiving power. Fault Off The normal state; indicates there are no fault conditions on the switch.
Resumen del contenido incluido en la página 13
Introducing the Switch Front of the Switch Switch LEDs State Meaning Test Off The normal operational state; the switch is not undergoing self test. (green/orange) On green The switch self test and initialization are in progress after the switch has been power cycled or reset. The switch is not operational until this LED goes off. The Test LED also comes on briefly when you “hot swap” a mini- GBIC into the switch; the mini-GBIC is tested when it is hot swapped. Flashing A component of the swit
Resumen del contenido incluido en la página 14
Introducing the Switch Front of the Switch Port LEDs The port LEDs provide information about the individual switch ports. Table 1-3. Port LEDs Switch LEDs State Meaning Port LEDs 2 Link On The port is enabled and receiving a link indication from the connected device. In PoE mode, indicates that the port is configured to enable PoE (green) power delivery to the connected device. Off One of these condition exists: � no active network cable is connected to the port � the port is not receiving l
Resumen del contenido incluido en la página 15
Introducing the Switch Front of the Switch LED Mode Select Button and Indicator LEDs To optimize the amount of information that can be displayed for each of the switch ports in the limited space available, the 2520G-PoE switches use multiple-display LEDs for each port. Link LED Mode LED The 2520G-PoE switches, have two LEDs per port. The Link status is always shown by the Link LED. The operation of the Mode LED is controlled by the LED Mode select button, and the current setting is i
Resumen del contenido incluido en la página 16
Introducing the Switch Front of the Switch Reset Button This button is for: ■ Resetting the switch - When the switch is powered on. This action clears any temporary error conditions that may have occurred and executes the switch self test. ■ Restoring Factory Default Configuration - When pressed with the Clear button in a specific pattern, any configuration changes you may have made through the switch console, the Web browser interface, and SNMP management are removed, and the factory de
Resumen del contenido incluido en la página 17
Introducing the Switch Back of the Switch Back of the Switch HP ProCurve 2520G-8-PoE Switch (J9298A) DC power connector HP ProCurve 2520G-24-PoE Switch (J9299A) AC power connector Power Connector The Switch 2520G-24-PoE does not have a power switch; it is powered on when connected to an active AC power source. The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz. There are no voltage range settings required. The Switch 2520G-8-PoE also does
Resumen del contenido incluido en la página 18
Introducing the Switch Switch Features Switch Features The features of the 2520G-PoE switches include: ■ 8, or 24 auto-sensing 10/100/1000Base-T RJ-45 ports with Auto-MDIX. ■ Two, or four dual-personality uplink ports (1000Base-T RJ-45 or mini- GBIC). ■ Power over Ethernet (PoE) operation—the switches are IEEE 802.3af compliant and provide up to 15.4W per port to power IP phones, wireless access points, Web cameras, and more. For more information, see the PoE Planning and Implementation Guide
Resumen del contenido incluido en la página 19
Introducing the Switch Switch Features ■ Variable speed fans ensure quiet operation on the Switch 2520G-24-PoE. ■ Support for many advanced features to enhance network performance— for a description, see the Management and Configuration Guide, which is on the ProCurve Web site at www.hp.com/go/procurve/manuals. (You may want to bookmark this Web page for easy access in the future.) Save Power Mode A Save Power mode feature can be configured through the console. Save Power mode can be used to
Resumen del contenido incluido en la página 20
