Manual de instrucciones de GE D-S7600

Resumen del contenido incluido en la página 1

GE Security
managed ethernet
switches
D-GES7600 Series
Installation & Operation Instructions

Resumen del contenido incluido en la página 2

Manageable 8/9-Port Switch PREFACE This manual describes how to install and use the D-GES7600 series EtherNav” Manageable 8/9-Port 10/100/1000 Base-TX (100/1000 Base-FX) Ethernet Switch. This switch integrates full wire speed switching technology with SNMP/RMON web-based management functions. The D-GES7600 series brings a simple answer to today’s complicated networking environments. To get the most out of this manual, you should have an understanding of Ethernet networking concepts. In this man

Resumen del contenido incluido en la página 3

Manageable 8/9-Port Switch INSTALLATION & OPERATION MANUAL / D-GES7600 PREFACE TABLE OF CONTENTS PRODUCT OVERVIEW Package Contents............................................................................................................................................ 1 Product Features............................................................................................................................ 1 Basic Features......................................................................

Resumen del contenido incluido en la página 4

Manageable 8/9-Port Switch INSTALLATION & OPERATION MANUAL / D-GES7600 SWITCH MANAGEMENT CONTINUED…. SNMP-Based Network Management................................................................................... 22 Protocols............................................................................................................................................. 22 Management Architecture........................................................................................................ 2

Resumen del contenido incluido en la página 5

Manageable 8/9-Port Switch PRODUCT OVERVIEW Manageable 8/9-Port Switch 100FX Optical Ports 1000FX Port Console Port Front View (D-GES7600-MM-S shown) Power Ports 10/100TX Electrical Ports Fiber Loss Alarm PACKAGE CONTENTS When you unpack the product package, you shall find the items listed below. • D-GES7600 EtherNav” Management Switch • D-GES7600 Quick Start Guide • External Power Adapter • CD ROM User’s Manual PRODUCT FEATURES Basic Features: - Provides up to nine (10/100/1000 TX and/or100/100

Resumen del contenido incluido en la página 6

Manageable 8/9-Port Switch PRODUCT FEATURES CONTINUED... Management Support: VLAN - 802.1Q tagged VLAN (up to 64 VLANs) - Quality of Service (QoS) Link Aggregation - Port-based Aggregation, up to four groups with a maximum of four ports each group - Load sharing based on source and destination MAC addresses Port-Mirroring - Port-mirroring provided through dedicated port, Port 1 Internet Working Protocols: Bridging - 802.1D Spanning Tree - 802.1P/Q –GARP/GVRP IP Multicast - IP Multicast Packet F

Resumen del contenido incluido en la página 7

Manageable 8/9-Port Switch FRONT PANEL DISPLAY (D-GES7600-MM-S Shown) 10/100TX Port Status Optical Status 1000FX Port Status Power Indicator 1. Power Indicator This LED comes on when the switch is properly connected to power. 2. Optical Status LED’s (FX) The ACT LED’s come on when data is present. (LED will flash at the rate data is transferred). The LNK LED’s will be on for 100FX speed transmission. 3. 10/100/1000TX Port Status LED’s The LED’s are located at each port, displaying status. P

Resumen del contenido incluido en la página 8

Manageable 8/9-Port Switch LED State Indication A valid network connection established GREEN Steady Flashing Data transfer YELLOW PHYSICAL PORTS This EtherNav” managed switch provides up to nine (10/100/1000TX and/or 100/1000FX combinations) ports: CONNECTIVITY - RJ-45 connectors - SC connector on fiber ports MODE SELECTION - 10BaseT full-duplex mode - 10BaseT half-duplex mode - 100BaseTX full-duplex mode - 100BaseTX half-duplex mode - 100BaseFX full-duplex mode - 100BaseFX half-duplex mode - 10

Resumen del contenido incluido en la página 9

Manageable 8/9-Port Switch PLEASE NOTE: I. Half-duplex mode uses back pressure flow control to prevent the receiving buffer from being overrun by data from a source node. II. Full-duplex mode uses 802.3x flow control standard to prevent fast data traffic from overrunning slow data traffic. III. Auto-sensing mode is in use after auto-negotiating with the other end of the link. BASIC FUNCTIONS In general, the D-GES7600 is responsible for switching both VLAN tagged and untagged frames from a rece

Resumen del contenido incluido en la página 10

Manageable 8/9-Port Switch PLEASE NOTE: I. Half-duplex mode uses back pressure flow control to prevent the receiving buffer from being overrun by data from a source node. II. Full-duplex mode uses 802.3x flow control standard to prevent fast data traffic from overrunning slow data traffic. III. Auto-sensing mode is in use after auto-negotiating with the other end of the link. LEARNING After VLAN classification, the switch checks the pair in the switching database (SD

Resumen del contenido incluido en la página 11

Manageable 8/9-Port Switch MULTICAST SWITCHING For multicast switching, the D-GES7600 checks whether the received frame is a BPDU. If a BPDU is received, the switch forwards the frame to the CPU for processing by the spanning tree protocol. Otherwise, the D-GES7600 performs the following processes: VLAN CLASSIFICATION Same as for unicast switching. LEARNING Same as for unicast switching. FILTERING After learning the address, the switch checks: - Whether the source port or destination port is not

Resumen del contenido incluido en la página 12

Manageable 8/9-Port Switch VLAN A virtual LAN (VLAN) is a network of computers or peripherals that behave as if they are connected to the same wire, even though they may actually be physically located in different locations of a LAN. VLANs are similar to a group of end stations, perhaps on multiple physical LAN segments that are not inhibited by their physical location and can communicate as if they were on a common LAN. VLANs are configured through software rather than hardware, which makes th

Resumen del contenido incluido en la página 13

Manageable 8/9-Port Switch BROADCAST CONTROL In traditional networks, traffic broadcasts to all network devices, whether they are the intended recipients or not. However, VLANs can be set up to contain only those devices that need to communicate with each other. As a result, VLANs considerably reduce network congestion. In addition, VLANs prevent broadcast storms from causing a network from crashing due to volumes of traffic. MULTICAST-BASED MULTIMEDIA APPLICATIONS Multimedia applications, suc

Resumen del contenido incluido en la página 14

Manageable 8/9-Port Switch REMOTE VLAN MEMBERSHIP Additionally to providing network management tools that allow network administrators to statically add and delete VLAN member ports, the switch also supports GVRP (GARP VLAN Registration Protocol). GVRP allows for dynamic registration of VLAN port members within switch and across multiple switches. Other than supporting dynamic updating of registration entries in a switch, GVRP is used to communicate VLAN registration information to other VLAN-

Resumen del contenido incluido en la página 15

Manageable 8/9-Port Switch IGMP Snooping & IP Multicast Filtering Continued... If there is more than one router on the LAN performing IP multicasting, one of the routers is elected ‘querier’ and assumes the reponsibility. Based on the group membership information learned from the IGMP, a router can determine which (if any) multicast traffic needs to be forwarded to each of its ‘leaf’ sub-networks. Multicast routers use this information, along with a multicast routing protocol, to support IP m

Resumen del contenido incluido en la página 16

Manageable 8/9-Port Switch INSTALLATION This section gives step-by-step instructions about how to install the EtherNav” D-GES7600 switch: Selecting a Site for the Switch As with any electric device, you should place the switch where it will not be subjected to temperatures, humidity, or electromagnetic interference above the rated specifications. The site you select should meet the following requirements: - The ambient temperature should be between –40 to 74 degrees Celsius. - The relative hum

Resumen del contenido incluido en la página 17

Manageable 8/9-Port Switch DIN Rail Back Mounting (-DB Option) The bracket provided will require the removal and re-installation of some cover screws as shown below. Bracket (-DB Option) Cover Screws DIN Rail Side Mounting (-DS Option) The bracket provided will require the removal and re-installation of one cover screw, the other screws are provided with the bracket as shown below. D-GES7600 Unit (10/100 Port Side) Provided Mounting Screws Bracket Note: Bracket is mounted on the Power (-DS Opti

Resumen del contenido incluido en la página 18

Manageable 8/9-Port Switch Rack Mounting Single Unit (-RS Option) The brackets provided have screws included for proper mounting as shown below. Mounting Screws 4 Locations (Provided) Brackets (-RS Option) (Top View) (Front View) Note: All screws must be fastened and secured to insure adequate stability and strength. User’s Manual 14

Resumen del contenido incluido en la página 19

Manageable 8/9-Port Switch Rack Mounting Dual Units (-RD Option) The brackets and braces provided have screws included for proper mounting as shown below. (Front View) Brackets (2 Provided) Brace (2 Provided ) Mounting Brace Screws Locations (Bottom View) User’s Manual 15

Resumen del contenido incluido en la página 20

Manageable 8/9-Port Switch CONNECTING TO POWER External Power Step One: Wire the supplied AC power adapter to the “A” receptacle plug at the front of the switch. — white stripe to pin 1 (+), black to pin 2 (-). Step Two: Attach the plug into a standard AC outlet with the appropriate AC voltage. Primary “A” Power Connector Secondary “B” Power Connector To Primary Wall Supply To Secondary Supply (D7600-MM-E-CC Shown)) Note: The secondary supply must be equal to or less than the potential of the pr