Resumen del contenido incluido en la página 1
24-Port Fast/Gigabit
Ethernet Smart Switch
(VLAN, Trunking, QoS)
ES-5224R+
ES-5224RF+
ES-5224RE+
ES-3124RE+
User’s Manual
Resumen del contenido incluido en la página 2
FCC COMPLIANCE STATEMENT This equipment has been tested and found to comply with the limits of a Class A computing devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If you suspect this product is causing inte
Resumen del contenido incluido en la página 3
Content 1. Introduction .........................................3 2. Features & Specifications ...................4 3. Package Contents.................................6 4. Hardware Description.........................7 5. Advance Smart Function Setting .....9 5.1 Main Manu....................................... 11 5.2 Switch Static Configuration ...........13 5.2.1 Port Configuration......................14 5.2.2 Trunk Configuration...................16 5.2.3 VLAN Configuration .....
Resumen del contenido incluido en la página 4
1. Introduction Congratulations on your purchase of this Fast/Gigabit Ethernet Smart Switch. This high performance smart switch provides Ethernet ports to segment network traffics, extend Ethernet connection distance, and convert data packets between different transmission speeds. This switch utilizes stored-and-forward switching architecture that filters and forwards data after the complete data packet is received and examined to be free of errors. With one set of status LEDs for ea
Resumen del contenido incluido en la página 5
2. Features & Specifications Features Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet (IEEE802.3z, IEEE802.3ab for Gigabit switch) Provides Store-and-Forward architecture and full wire speed filtering and forwarding rates 10/100Mbps Ports support full/half duplex modes and auto-negotiation Provides two Fast Ethernet Modules option (Fast Ethernet Smart Switch): ♦ 100/10Mbps UTP connector (RJ-45) ♦ 100Mbps Fiber SC/ST connector (multi/single mode) Provides two Gig
Resumen del contenido incluido en la página 6
Specifications Standards: IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.1Q, IEEE802.1p 10/100Mbps Ports: RJ-45 24 Expansion Slot Option (Fast Ethernet Switch): ♦ 10/100Mbps UTP connector (RJ-45) ♦ 100M Fiber SC/ST connector (multi/single mode) Expansion Slot Option (Gigabit Ethernet Switch only): ♦ 1000/100/10Mbps UTP connector (RJ-45) ♦ 1000Mbps Fiber SC connector (multi/single mode) Console Port: DB9 1 Forwarding Method: Store-and-Forward MAC Address: 14K Bu
Resumen del contenido incluido en la página 7
3. Package Contents Packing list Check the contents of your package for following parts: One Fast/Gigabit Ethernet Smart Switch One User's manual One Power cord One RS-232 Cable If any of the items are missing or damaged, please contact your local dealer. 6
Resumen del contenido incluido en la página 8
4. Hardware Description This section describes the hardware features of this Fast/Gigabit Ethernet Smart Switch. For easier management and control of the switch, familiarize yourself with its display indicators and ports. All LEDs are located on the front panel of the switch. They serve the purpose of monitoring the operation and performance of the switch at a glance. LED indicators LNK: ON LNK/ACT ACT: Blink ON:100M 100M OFF:10M
Resumen del contenido incluido en la página 9
Operating Environment This smart switch must be installed and operated within the limits of the specified operating temperature and humidity (see previous section on Specifications). Do not place objects on top of the unit or obstruct any vents at the sides of the unit. Do not position the unit near any heating source such as heaters, radiators, or direct exposure to sun. Do not expose the unit to water and or moisture. If necessary, use a dehumidifier to reduce humidity. Connecting to
Resumen del contenido incluido en la página 10
5. Advance Smart-Function Setting This smart switch provides advance features, which offers you more flexibility in setting up your network. The following section explains how to set up the VLAN, Trunking, Port speed, Full/Half duplex modes and QoS. Before using advance Configuration Connect to PC Attach a RS-232 serial cable 9-pin male connector to the female connector on the switch. Plug the other side of this cable to your PC. Using Hyper Terminal to connect to Switch In MS
Resumen del contenido incluido en la página 11
4. Adjust the settings of the communication port. 4.1 Select the using by connect interface such as COM1,COM2 4.2 Select the Bits per second at “9600” 4.3 Set the flow control value as “None”. 10
Resumen del contenido incluido en la página 12
5.1 Main Manu Once you have powered on the swtich, it will boot up automatically and the welcome window will ask you to enter user name and password. If this is your first time to log into the configuration program, then the default user name is “admin” with default password “123”. 11
Resumen del contenido incluido en la página 13
After you have entered the correct user name and password, you will have access to the system configuration program. The console port will display the Main Menu as follows. Switch Static Configuration: Configure the switch. Such as port speed and duplex, trunk configure, VLAN, MISC and QoS. Reboot Switch: Restart the system or configure the switch to default values. Logout: Exit the system. Note:The control keys as following provide in all menus. Tab: Move the curs
Resumen del contenido incluido en la página 14
5.2 Switch Static Configuration There are six items to select: Port Configuration: Configure the port state, auto negotiation, speed/duplex and flow control. Trunk Configuration: Configure the trunk group. VLAN Configuration: Configure the VLAN group. Misc Configuration: Display the firmware version, change user name and password. Priority Configuration: Configure the priority of each port. Main Menu: Return to main menu. 13
Resumen del contenido incluido en la página 15
5.2.1 Port Configuration In this configuration, you can set the status of each port. Enable: Press Space key to enable or disable this port. “Yes” means the port is enable “No” means the port is disable Auto: You can enable or disable the auto-negotiation of each port. Press Space key to choose items as follows: AUTO: enable auto-negotiation. NWAY_FORCE: force the port in specified speed/duplex and enable auto-negotiation. FORCE: disable auto-negotiation. Spd/Dpx: You can set 10 o
Resumen del contenido incluido en la página 16
Note: If the trunk group exists, you can see it (ex: TRK1, TRK2 etc.) after port 26, and you can configure all of the items as above. Action-> : Exit this menu and return to the previous menu. : Configure all items. After finished configure, press Ctrl+A to go back action menu line. : Save all configure value. : Return to previous page to configure. : Go to the next page to configure. Note: You have to save the settings after configured on
Resumen del contenido incluido en la página 17
5.2.2 Trunk Configuration There are seven trunk groups to configure. You can arbitrarily select up to four ports from port 1 ~ port 24 or port 25 ~ port 26 to build a trunk group. Configure a trunk group as the following steps: 1. Select on actions menu and then press Space key to configure the member ports of each trunk group. 2. Besides choosing the member ports, you have to set “Static” for the corresponding trunk group of TRK1~TRK7 item. 3. Press Ctrl+A to go back actions men
Resumen del contenido incluido en la página 18
5.2.3 VLAN Configuration A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. It allows you to isolate network traffic so that only members of the VLAN receive traffic from the same VLAN members. Basically, creating a VLAN from a switch is logically equivalent of reconnecting a group of network devices to another Layer 2 switch. However, all the network devices are still plug into the same switch physically. This smart switch supports both port-based and T
Resumen del contenido incluido en la página 19
5.2.3.1 VLAN Configure In this menu, you can set VLAN mode as port-based VLAN or 802.1Q VLAN or just disable this function. 18
Resumen del contenido incluido en la página 20
If the VLAN mode is 802.1Q VLAN, you can set PVID (port VID) in the same menu, too. PVID (Port VID): Set the port VLAN ID that will be assigned to untagged traffic on a given port. This feature is useful for accommodating devices that you want to participate in the VLAN but that don’t support tagging. This smart switch allows you to set one PVID for each port, the range is 1 ~ 255. 19
