Manual de instrucciones de Compaq CPQ10KVM

Resumen del contenido incluido en la página 1

Compaq 2 Port PS/2 KVM Switch







CPQ10KVM

Resumen del contenido incluido en la página 2

FCC STATEMENT CPQ10KVM This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection aga

Resumen del contenido incluido en la página 3

Table of Contents FCC Statement…………………………..……………………………………………….. Page 2 Welcome…………………………………………………………………………………… Page 4 Installing the Mini KVM Switch……...…………...……………………………………… Page 5 Using the Mini KVM Switch……………………………………………………………… Page 6 Troubleshooting and Technical Support…...…………………….…………………….. Page 7 3

Resumen del contenido incluido en la página 4

Welcome Congratulations on your purchase of your new Compaq 2 Port PS/2 KVM Switch. The Compaq 2 Port PS/2 KVM Switch allows you to control two PCs from one keyboard, mouse and video monitor. Package Contents • 2 Port PS/2 Mini KVM Switch • 2 Built-in 6ft KVM cables with mouse, keyboard and VGA port • User’s Manual • Warranty Information Features and Benefits • Use one keyboard, monitor and mouse to control two computers • Easy to Install – No software required – connecting the

Resumen del contenido incluido en la página 5

Installing the KVM Switch Before you begin, please turn off the computers you are connecting the KVM Switch to. STEP 1 – Connect your monitor VGA cable, PS/2 keyboard and PS/2 mouse to the appropriate ports on the KVM switch. STEP 2 – Connect the VGA, PS/2 keyboard and PS/2 mouse cables from the KVM switch to each computer you want to connect the KVM switch to. STEP 3 – Turn both the computers on, and continue reading this manual for instructions for operation of the KVM Switch. 1-

Resumen del contenido incluido en la página 6

Using the KVM Switch Switching PCs: On the KVM Switch, you will see two LED lights. The LED that is lit is the selected PC to be displayed on the monitor. In order to switch from one PC to the other, simply hit the SCROLL LOCK key twice on your keyboard, then hit either the UP ARROW or DOWN ARROW. [Scroll Lock] + [Scroll Lock] + [ ↑] or [Scroll Lock] + [Scroll Lock] + [ ↓] Auto Scan Mode: With the KVM Switch in Auto Scan mode, you can monitor the activity of the conn

Resumen del contenido incluido en la página 7

Troubleshooting Make sure all cables are secure. Label your cables to avoid confusion. Turning on your PC: DO NOT press any keys on the keyboard while the selected computer is turning on. Otherwise, it might cause a keyboard error. This may also result in an unpredictable error on your PC. Keyboard: If the keyboard is not responding through the KVM switch, make sure the keyboard works when directly plugged into the PC. If the keyboard is still not responding in the KVM switch, try a

Resumen del contenido incluido en la página 8

© 2003 Micro Innovations 8