Resumen del contenido incluido en la página 1
Catalyst 3560-C and 2960-C Switch
Hardware Installation Guide
March 2013
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-23803-02
Resumen del contenido incluido en la página 2
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE
Resumen del contenido incluido en la página 3
CONTENTS Preface vii Related Publications i-viii Obtaining Documentation and Submitting a Service Request i-viii CHAPTER 1 Product Overview 1-1 Switch Models 1-1 Front Panel 1-2 10/100 and 10/100/1000 Fast Ethernet Downlink Ports 1-5 PoE Ports (Switches with PoE Ports) 1-5 PoE Pass-Through 1-6 PoE Uplink Ports (Catalyst 2960CPD-8TT-L, 2960CPD-8PT-L, and 3560CPD-8PT-S) 1-8 PoE-Capable Downlink Ports (Catalyst 2960CPD-8PT-L, 3560CG-8PC-S, 3560CPD-8PT-S, 2960C-8PC-L, 2960C-12PC-L, 3560C-8PC-S, a
Resumen del contenido incluido en la página 4
Contents CHAPTER 2 Switch Installation 2-1 Preparing for Installation 2-1 Warnings 2-1 Installation Guidelines 2-3 Equipment That You Supply 2-4 Box Contents 2-4 Powering the Switch 2-4 Verifying Switch Operation 2-5 Mounting the Switch 2-5 On a Desk or Shelf (without Mounting Screws) 2-6 Desk, Shelf, or Wall (with Mounting Screws) 2-6 Desk- or Shelf-Mounting 2-6 Under the Desk- or Shelf-Mounting 2-8 Wall-Mounting 2-10 With a Mounting Tray 2-13 Mounting Tray with Screws 2-13 Mounting Tray with
Resumen del contenido incluido en la página 5
Contents Switch LEDs 3-2 Switch Connections 3-2 Bad or Damaged Cable 3-2 Ethernet and Fiber-Optic Cables 3-2 Link Status 3-2 10/100 and 10/100/1000 Port Connections 3-3 10/100 PoE or PoE+ Port Connections 3-3 SFP Module 3-3 Interface Settings 3-3 Ping End Device 3-3 Spanning Tree Loops 3-4 Switch Performance 3-4 Speed, Duplex, and Autonegotiation 3-4 Autonegotiation and Network Interface Cards 3-4 Cabling Distance 3-4 Resetting the Switch 3-5 Finding the Switch Serial Number 3-5 APPENDIX A Tec
Resumen del contenido incluido en la página 6
Contents Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver C-6 Uninstalling the Cisco Microsoft Windows Vista and Windows 7 USB Driver C-6 Entering the Initial Configuration Information C-7 IP Settings C-7 Completing the Setup Program C-7 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide vi OL-23803-02
Resumen del contenido incluido en la página 7
Preface This guide describes the hardware features of the Catalyst 3560-C and 2960-C switches. It describes the physical and performance characteristics of the switch, explains how to install it, and provides troubleshooting information. This guide does not describe system messages that you might receive or how to configure your switch. See the switch software configuration guide, the switch command reference, and the switch system message guide on Cisco.com. Note Means reader take note. N
Resumen del contenido incluido en la página 8
Preface Related Publications Related Publications http://www.cisco.com/go/cat3560c_docs http://www.cisco.com/go/cat2960c_docs Note Before installing, configuring, or upgrading the switch, see the release notes on Cisco.com for the latest information. • Release Notes for the Catalyst 3560-C Switch � Release Notes for the Catalyst 2960-C Switch � Catalyst 3560-C and 2960-C Switch Getting Started Guide � Regulatory Compliance and Safety Information for the Catalyst 3560-C and 2960-C Switches � C
Resumen del contenido incluido en la página 9
CH A P T E R1 Product Overview The Catalyst 3560-C and 2960-C of switches, also referred to as the switch, are Ethernet switches to which you can connect devices such as Cisco IP Phones, Cisco Wireless Access Points, workstations, and other network devices such as servers, routers, and other switches. You can deploy these switches outside of the traditional wiring closet environment, such as in office workspaces, hotel rooms, slot machines, kiosks, and classrooms. The switch is suitable for
Resumen del contenido incluido en la página 10
Chapter 1 Product Overview Front Panel Table 1-1 Switch Model Descriptions (continued) Switch Model Description Catalyst 3560C-8PC-S 8 10/100 PoE+ ports and 2 dual-purpose ports. Catalyst 3560C-12PC-S 12 10/100 PoE+ ports and 2 dual-purpose ports. 1. PoE = Power over Ethernet 2. SFP = small form-factor pluggable Front Panel � 8 or 12 downlink Ethernet ports of one of these types: – 10/100 – 10/100/1000 – 10/100 PoE – 10/100 PoE+ – 10/100/1000 PoE – 10/100/1000 PoE+ � Two 10/100/1000 upli
Resumen del contenido incluido en la página 11
SeriesPD SYST STAT DPLX 1 2 3 4 5 6 78 SPD 1 2 PoE PD M ODE CONSOLE POW ER OVER ETHERNET Catalyst 3560-CG SeriesPoE SYST STAT DPLX 1234 56 7 8 9 10 SPD PoE MODE CONSOLE POW EROVER ETHERNET Chapter 1 Product Overview Front Panel Figure 1-1 Catalyst 2960CPD-8PT-L Front Panel View 6 4 3 2 1 5 1 Mode button 4 LEDs 2 USB mini-Type B (console) port 5 10/100 PoE ports 3 RJ-45 console port 6 10/100/1000 uplink ports Figure 1-2 Catalyst 3560CG-8PC-S Front Panel View 7 5 4 3 2 1 6 1 Mode button
Resumen del contenido incluido en la página 12
Catalyst 3560-CG SeriesPD SYST STAT 1234 567 8 DPLX SPD 1 2 PoE PD MODE CONSOLE POW EROVER ETHERNET Catalyst 2960-C SeriesPoE SYST STAT 1 3 5 7 9 11 DPLX 1 2 SPD PoE 2 4 6 8 10 12 MODE CONSOLE POWEROVERETHERNET Chapter 1 Product Overview Front Panel Figure 1-3 Catalyst 3560CPD-8PT-S Front Panel View 7 5 4 3 2 1 6 1 Mode button 5 LEDs 2 USB Type A port 6 10/100/1000 PoE ports 3 USB mini-Type B (console) port 7 10/100/1000 uplink ports 4 RJ-45 console port Figure 1-4 Catalyst 2960C-12PC-L F
Resumen del contenido incluido en la página 13
Catalyst 3960-C SeriesPoE SYST STAT 1 3 5 7 9 11 DPLX 1 2 SPD PoE 4 6 8 10 12 2 MODE CONSOLE POWEROVERETHERNET Chapter 1 Product Overview Front Panel Figure 1-5 Catalyst 3560C-12PC-S Front Panel View 4 3 2 1 5 6 1 Mode button 4 LEDs 2 USB mini-Type B (console) port 5 10/100 PoE ports 3 RJ-45 console port 6 Dual-purpose ports 10/100 and 10/100/1000 Fast Ethernet Downlink Ports You can set the 10/100 ports to operate at 10 or 100 Mb/s in full-duplex or half-duplex mode. You can set the 10/
Resumen del contenido incluido en la página 14
Chapter 1 Product Overview Front Panel All 8 or 12 downlink ports on the Catalyst,3560CG-8PC-S, 3560C-8PC-S, and 3560C-12PC-S switches are PoE+ capable. The maximum switch power output is 123.2 W. You can budget the PoE and PoE+: � 15.4 W of PoE output on eight ports � 30 W of PoE+ on four ports On a per-port basis, you control whether or not a port automatically provides power when an IP phone or an access point is connected. The 10/100/1000 PoE ports use RJ-45 connectors with Etherne
Resumen del contenido incluido en la página 15
CONSOLE NETWORK SYST XPS STAT SPEED DUPLX MODE MODULE EN S-PWR MAST STACK PoE C3KX-NM-10G 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 23 G1 G2/TE1 G3 G4/TE2 Catalyst 3750-X PoE+48 Series PD SYST STAT DPLX 1 2 3 4 5 6 7 8 SPD 1 2 PoE PD MODE CONSOLE POWER OVER ETHERNET Chapter 1 Product Overview Front Panel Figure 1-6 PoE Pass-Through 1 2 3 4 13:02 10/9/00 2000 _ 2000 3000 Your current options Redial
Resumen del contenido incluido en la página 16
Chapter 1 Product Overview Front Panel Table 1-2 PoE Budgeting for the Catalyst 2960CPD-8PT-L Powering Options on the Power Sent from Uplink Uplink Ports Switches Available PoE budget 1 PoE uplink 15.4 W – 2 PoE uplinks 30.8 W 7 W 1 PoE+ uplink 30 W 7 W 2 PoE+ uplinks 60 W 22.4 W 1 PoE and 1 PoE+ uplink 45.4 W 15.4 W 1 I Cisco UPOE uplink 60 W 30.8 W 1 2 Cisco UPOE uplinks 120 W 30.8 W 2 Auxiliary power input – 22.4 W (30.8 ) 1. The second UPOE uplink is a backup. 2. When the Auxiliary
Resumen del contenido incluido en la página 17
Chapter 1 Product Overview Front Panel PoE-Capable Downlink Ports (Catalyst 2960CPD-8PT-L, 3560CG-8PC-S, 3560CPD-8PT-S, 2960C-8PC-L, 2960C-12PC-L, 3560C-8PC-S, and 3560C-12PC-S) Depending upon the available PoE budget, these switches can power other PoE-capable devices such as IP phones, access points, and so on. See Table 1-2 for PoE budgeting information. See Figure 1-6. For information on powering the switches, see the “Powering the Switch” section on page 2-4. USB Type A Port Some
Resumen del contenido incluido en la página 18
Chapter 1 Product Overview Front Panel � GLC-FE-100BX-U= � CWDM SFPs For information about SFP modules, see your SFP module documentation and the “Installing SFP Modules” section on page 2-31. For cable specifications, see the “SFP Module Cables” section on page B-3. Management Ports You can connect the switch to a PC running Microsoft Windows or to a terminal server through either the RJ-45 console port or the USB mini-Type B console port, also referred to as the USB-mini console por
Resumen del contenido incluido en la página 19
SYST STAT 1234 5 67 8 DPLX SPD PoE PD MODE CONSOLE POW ER OVER ETHERNET Chapter 1 Product Overview Front Panel LEDs You can use the switch system and port LEDs to monitor switch activity and performance. Switch Panel LEDs Figure 1-8 Switch LEDs 8 1 2 3 4 5 6 7 1 Mode button 5 SPD LED (speed) 1 2 SYST LED (system) 6 PoE LED 2 3 STAT LED (status) 7 PD LED (powered device) 4 DPLX LED (duplex) 8 Port LEDs 1. Applicable to switches with PoE ports. 2. Only the Catalyst 2960CPD-8PT-L and 3560
Resumen del contenido incluido en la página 20
Chapter 1 Product Overview Front Panel System LED Table 1-4 System LED Color System Status Off System is not powered on. Green System is operating normally. Amber System is receiving power but is not operating properly. Console LEDs The console LEDs show which console port is in use. See Figure 1-1 and Figure 1-2 for the LED locations. If you connect a cable to a console port, the switch automatically uses that port for console communication. If you connect two console cables, the USB-m
