Resumen del contenido incluido en la página 1
Cisco IE 3000 Switch Hardware
Installation Guide
June 2008
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-13017-01
Resumen del contenido incluido en la página 2
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE
Resumen del contenido incluido en la página 3
CONTENTS Preface ix Audience ix Purpose ix Conventions ix Related Publications x Obtaining Documentation, Obtaining Support, and Security Guidelines x CHAPTER 1 Overview 1-1 Overview 1-1 Switch Models 1-2 Front-Panel Description 1-2 10/100 Ports 1-5 Dual-Purpose Ports 1-5 100BASE-FX Ports 1-5 Power and Relay Connector 1-5 Console Port 1-6 LEDs 1-6 Setup LED 1-8 System LED 1-9 Alarm LED 1-9 Power Status LED 1-9 10/1
Resumen del contenido incluido en la página 4
Contents Installation Guidelines 2-3 Environment and Enclosure Guidelines: 2-3 Other Guidelines 2-3 Verifying Package Contents 2-5 Adding Modules to the Switch 2-5 Expansion Module Configurations 2-5 Connecting Modules 2-8 Installing or Removing the Compact Flash Memory Card 2-10 Verifying Switch Operation 2-11 Connecting a PC or a Terminal to the Console Port 2-12 Connecting the Protective Ground and DC Power 2-13 Grounding the Switch 2-13 Wirin
Resumen del contenido incluido en la página 5
Contents Preparing the AC Power Cord 2-47 Connecting the AC Power Cord to the Power Converter 2-48 Connecting the Power Converter to a DC Power Source 2-51 Applying Power to the Power Converter 2-53 Where to Go Next 2-53 CHAPTER 3 Troubleshooting 3-1 Diagnosing Problems 3-1 Verify Switch POST Results 3-1 Verify Switch LEDs 3-2 Verify Switch Connections 3-2 Bad or Damaged Cable 3-2 Ethernet and Fiber Cables 3-2 Link Status 3-3 Transceiver Issu
Resumen del contenido incluido en la página 6
Contents Expansion Module Configurations B-9 Connecting Modules B-11 Installing or Removing the Compact Flash Memory Card B-13 Verifying Switch Operation B-14 Connecting a PC or a Terminal to the Console Port B-15 Connecting the Protective Ground and DC Power B-16 Grounding the Switch B-17 Wiring the DC Power Source B-19 Attach the Power and Relay Connector to the Switch B-24 Running POST B-25 Power On the Switch B-25 Verify POST Results B-25 Dis
Resumen del contenido incluido en la página 7
Contents Where to Go Next B-59 APPENDIX C Cable and Connectors C-1 Connector Specifications C-1 10/100 Ports C-1 Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices C-1 Connecting to 1000BASE-T Devices C-1 100BASE-FX Ports C-3 SFP Module Ports C-3 Dual-Purpose Ports C-4 Console Port C-4 Cable and Adapter Specifications C-4 SFP Module Cable Specifications C-4 Two Twisted-Pair Cable Pinouts C-5 Four Twisted-Pair Cable Pinouts for 1000BASE
Resumen del contenido incluido en la página 8
Contents Cisco IE 3000 Switch Hardware Installation Guide viii OL-13017-01
Resumen del contenido incluido en la página 9
Preface Audience This guide is for the networking or computer technician responsible for installing Cisco IE 3000 series switches. We assume that you are familiar with the concepts and terminology of Ethernet and local area networking. Purpose This guide documents the hardware features of the Cisco IE 3000 switches. It describes the physical and performance characteristics of each switch, explains how to install a switch, and provides troubleshooting information. This guide does not descr
Resumen del contenido incluido en la página 10
Preface Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 The safety warnings for this product are translated into several
Resumen del contenido incluido en la página 11
CH A P T E R 1 Overview This chapter provides these topics that describe the Cisco Industrial Ethernet (IE) 3000 switch, hereafter referred to as the switch. This chapter provides a functional overview of the switches and covers these topics: Overview, page 1-1 Switch Models, page 1-2 Front-Panel Description, page 1-2 Compact Flash Memory Card, page 1-11 Rear-Panel Description, page 1-12 Power Converter (Optional), page 1-13 Management Options, page 1-14 Network Confi
Resumen del contenido incluido en la página 12
Chapter 1 Overview Switch Models Switch Models Table 1-1 describes the switch and the expansion modules. The Cisco IE-3000-4TC and the Cisco IE-3000-8TC are the switch models, and the Cisco IEM-3000-8TM and the Cisco IEM-3000-8FM are expansion modules that you can connect to increase the number of ports. For instructions on how to connect the expansion modules to the switch, see the “Adding Modules to the Switch” section on page 2-5. . Table 1-1 Cisco IE 3000 Switch Models Switch M
Resumen del contenido incluido en la página 13
Chapter 1 Overview Front-Panel Description Figure 1-1 Cisco IE-3000-8TC Switch 1 2 3 4 5 1 Power and relay connectors 4 10/100 ports 2 Console port 5 Protective ground connection 3 Dual-purpose ports Figure 1-2 Cisco IE-3000-4TC Switch 1 2 3 4 5 1 Power and relay connectors 4 10/100 ports 2 Console port 5 Protective ground connection 3 Dual-purpose ports Cisco IE 3000 Switch Hardware Installation Guide OL-13017-01 1-3 201700 201699
Resumen del contenido incluido en la página 14
Chapter 1 Overview Front-Panel Description Figure 1-3 Cisco IEM-3000-8TM Module 1 1 10/100 ports Figure 1-4 Cisco IEM-3000-8FM Module 1 1 100BASE-FX ports Cisco IE 3000 Switch Hardware Installation Guide 1-4 OL-13017-01 201702 201701
Resumen del contenido incluido en la página 15
Chapter 1 Overview Front-Panel Description 10/100 Ports You can set the 10/100 ports to operate at 10 or 100 Mb/s in full-duplex or half-duplex mode. You can also set these ports for speed and duplex autonegotiation in compliance with IEEE 802.3AB. (The default setting is autonegotiate.) When set for autonegotiation, the port senses the speed and duplex settings of the attached device and advertises its own capabilities. If the connected device also supports autonegotiation, the switc
Resumen del contenido incluido en la página 16
A A V RT Chapter 1 Overview Front-Panel Description The switch accessory pack includes the mating power and relay connectors. These connectors provide screw terminals for terminating the DC power and alarm wire and the connector plugs into the power and relay receptacles on the front panel. The positive DC power connection is labeled V, and the return connection is labeled RT (see Figure 1-5). Figure 1-5 Power and Relay Connector The switch can operate with a single power source or wi
Resumen del contenido incluido en la página 17
Chapter 1 Overview Front-Panel Description Figure 1-6 LEDs on the Cisco IE 3000 Switch 1 2 3 4 5 6 7 8 1 Express setup button 5 Dual-purpose uplink port LED 2 System LED 6 Pwr B LED 3 Alarm LED 7 Pwr A LED 4 Setup LED 8 Port LED Figure 1-7 LEDs on the Cisco IEM-3000-8TM Module 1 1 10/100 port LED Cisco IE 3000 Switch Hardware Installation Guide OL-13017-01 1-7 201703 201706
Resumen del contenido incluido en la página 18
Chapter 1 Overview Front-Panel Description Figure 1-8 LEDs on the Cisco IEM-3000-8FM Module 1 1 100BASE -FX port LEDs Setup LED The Setup LED displays the express setup mode for the initial configuration. Table 1-2 lists the LED colors and their meanings. Table 1-2 Setup LED Color Setup Status Off (dark) Switch is configured as a managed switch. Solid green Switch is in initial setup. Blinking green Switch is in initial setup, in recovery, or initial setup is incomplete. Solid red Swi
Resumen del contenido incluido en la página 19
Chapter 1 Overview Front-Panel Description System LED The System LED shows whether the system is receiving power and is functioning properly. Table 1-3 lists the system LED colors and their meanings. Table 1-3 System LED Color System Status Off System is not powered on. Green System is operating normally. Red Switch is not functioning properly. Alarm LED Table 1-4 lists the alarm LED colors and their meanings. Table 1-4 Alarm Status LED Color System Status Off Alarms are not configured
Resumen del contenido incluido en la página 20
Chapter 1 Overview Front-Panel Description Note The Pwr A and Pwr B LEDs show that power is not present on the switch if the power input drops below the low valid level. The power status LEDs only show that power is present if the voltage at the switch input exceeds the valid level. The difference, or hysteresis, ensures that the power status LEDs do not oscillate at values near 18 V. For information about the power LED colors during the power-on self-test (POST), see the “Verifying
