Resumen del contenido incluido en la página 1
6H128-08 and 6H129-08
SmartSwitch 6000 Modules
User’s Guide
FAST ENET FAST ENET
6H128-08 6H129-08
RESET RESET
COM COM
CPU CPU
1 1
2 2
3 3
4 4
5 5
6 6
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9032364-02
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Only qualified personnel should install the 6H128-08 and the 6H129-08. NOTICE Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes have been made. The hardware, firmware, or software described in this manual is subject to change without notice. IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE
Resumen del contenido incluido en la página 4
Notice INDUSTRY CANADA NOTICE This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.
Resumen del contenido incluido en la página 5
Notice CABLETRON SOFTWARE PROGRAM LICENSE 1. LICENSE. You have the right to use only the one (1) copy of the Program provided in this package subject to the terms and conditions of this License Agreement. You may not copy, reproduce or transmit any part of the Program except as permitted by the Copyright Act of the United States or as authorized in writing by Cabletron. 2. OTHER RESTRICTIONS. You may not reverse engineer, decompile, or disassemble the Program. 3. APPLICABLE LAW. This
Resumen del contenido incluido en la página 6
Notice SAFETY INFORMATION CLASS 1 LASER TRANSCEIVERS THE FE-100F3 FAST ETHERNET INTERFACE MODULE USES CLASS 1 LASER TRANSCEIVERS. READ THE FOLLOWING SAFETY INFORMATION BEFORE INSTALLING OR OPERATING THESE MODULES. The Class 1 laser transceivers use an optical feedback loop to maintain Class 1 operation limits. This control loop eliminates the need for maintenance checks or adjustments. The output is factory set, and does not allow any user adjustment. Class 1 Laser transceiver
Resumen del contenido incluido en la página 7
Notice DECLARATION OF CONFORMITY Application of Council Directive(s): 89/336/EEC 73/23/EEC Manufacturer’s Name: Cabletron Systems, Inc. Manufacturer’s Address: 35 Industrial Way PO Box 5005 Rochester, NH 03867 European Representative Name: Mr. J. Solari European Representative Address: Cabletron Systems Limited Nexus House, Newbury Business Park London Road, Newbury Berkshire RG13 2PZ, England Conformance to Directive(s)/Product Standards: EC Directive 89/336/EEC EC Dir
Resumen del contenido incluido en la página 8
Notice vi 6H128-08 and 6H129-08 User’s Guide
Resumen del contenido incluido en la página 9
CONTENTS CHAPTER 1 INTRODUCTION 1.1 Using This Guide......................................................................... 1-1 1.2 Structure of This Guide................................................................ 1-1 1.3 6H12X-08 Overview .................................................................... 1-3 1.3.1 Connectivity .................................................................... 1-3 1.3.2 Full Duplex Switched Ethernet (FDSE)........................... 1-3 1.3
Resumen del contenido incluido en la página 10
Contents CHAPTER 4 TROUBLESHOOTING 4.1 Using LANVIEW...........................................................................4-1 4.2 FE-100TX LED.............................................................................4-5 4.3 Troubleshooting Checklist............................................................4-6 4.4 Using the RESET Button .............................................................4-7 CHAPTER 5 LOCAL MANAGEMENT 5.1 Overview .........................................
Resumen del contenido incluido en la página 11
Contents 5.15 General Configuration Screen................................................... 5-40 5.15.1 Setting the IP Address .................................................. 5-44 5.15.2 Setting the Subnet Mask............................................... 5-46 5.15.3 Setting the Default Gateway ......................................... 5-46 5.15.4 Setting the TFTP Gateway IP Address......................... 5-47 5.15.5 Setting the Module Date ...........................................
Resumen del contenido incluido en la página 12
Contents 5.26 Switch Statistics Screen.............................................................5-86 5.26.1 Using the Clear Counters Command ............................5-87 5.27 Interface Statistics Screen .........................................................5-88 5.27.1 Displaying Interface Statistics .......................................5-91 5.27.2 Using the Clear Counters Command ............................5-91 5.28 RMON Statistics Screen ..................................
Resumen del contenido incluido en la página 13
CHAPTER 1 INTRODUCTION Welcome to the Cabletron Systems 6H128-08 and 6H129-08 SmartSwitch 6000 Modules User’s Guide. This guide describes the 6H128-08 and 6H129-08 interface modules and provides information concerning network requirements, installation, troubleshooting, and the use of Local Management for these modules. 1.1 USING THIS GUIDE Read through this guide completely to understand the features, capabilities, and Local Management functions of the 6H128-08 and 6H129-
Resumen del contenido incluido en la página 14
Chapter 1: Introduction Chapter 3, Installation, provides instructions on how to install the module in the chassis and connect segments to the device. Chapter 4, Troubleshooting, details the 6H12X-08 LANVIEW LEDs that enable quick diagnosis of network/operational problems. Chapter 5, Local Management, describes how to access Local Management and use the Local Management screens to manage the 6H12X-08 and 6C105 chassis. Appendix A, Specifications, contains information on funct
Resumen del contenido incluido en la página 15
6H12X-08 Overview 1.3 6H12X-08 OVERVIEW The 6H12X-08 (the 6H128-08 is shown in Figure 1-1) is a Fast Ethernet interface module for the Cabletron Systems 6C105 chassis. The module has six switched fiber optic ports and two optional ports for Fast Ethernet Interface Modules. The 6H128-08 has six multimode fiber optic 100BASE-FX switched ports using SC connectors, while the 6H129-08 has six single mode fiber optic 100BASE-FX switched ports also using SC connectors. The 6H12X-08 supports
Resumen del contenido incluido en la página 16
Chapter 1: Introduction FAST ENET 6H128-08 RESET Reset Button COM COM Port CPU CPU LED 1 2 3 Port Status LEDs 4 5 6 1 2 3 Network Ports 1-6 4 5 6 7 Optional Fast Ethernet Module Ports 7 and 8 8 23640101 Figure 1-1 The 6H12X-08 1-4 6H128-08 and 6H129-08 User’s Guide
Resumen del contenido incluido en la página 17
6H12X-08 Overview 1.3.3 Runtime IP Address Discovery This feature enables the 6H12X-08 to automatically accept an IP address from a BootP server on the network into NVRAM without requiring a user to enter an IP address through Local Management. When the 6H12X-08 is connected to the network and powered up, Runtime IP Address Discovery (RAD) checks the 6H12X-08 for an IP address. If one has not been assigned (6H12X-08 IP address set to 0.0.0.0), RAD checks to see if any of the 6H12X-08
Resumen del contenido incluido en la página 18
Chapter 1: Introduction 1.3.5 Remote Monitoring (RMON) The 6H12X-08 supports all Ethernet RMON groups, which include Statistics, Alarms, Events and History. These groups are enabled on all ports by default. Cabletron Systems RMON Actions is a vendor specific extension of RMON and provides the ability to set an “Action” on any SNMP MIB variable. The Action can be triggered by any RMON Event and/or Alarm. The Action can be, for example, to turn a MIB-2 interface off if a broadcas
Resumen del contenido incluido en la página 19
Local Management Features 1.3.9 LANVIEW Diagnostic LEDs The various conditions of the LANVIEW diagnostic LEDs serve as important troubleshooting aids. They provide an easy way to observe the transmit and receive status of individual ports and overall network operations such as system status, switching configuration, and Fast Ethernet channel usage. Chapter 4 provides details about the 6H12X-08 LANVIEW LEDs. 1.4 LOCAL MANAGEMENT FEATURES Local Management provides the tools that al
Resumen del contenido incluido en la página 20
Chapter 1: Introduction 1.4.4 SmartTrunk SmartTrunk, also referred to as SmartTrunking, is Cabletron Systems’ terminology for load balancing or load sharing. SmartTrunk technology provides an easy-to-implement mechanism to group, or aggregate, multiple physical links together to scale the backbone bandwidth beyond the limitations of a single link. All links are user-configurable so administrators can scale the backbone bandwidth by adding SmartTrunk links. The SmartTrunk ben
