Resumen del contenido incluido en la página 1
Powered by Accton
ES4324
24-Port Gigabit Ethernet
Installation Guide
Lite Switch
www.edge-core.com
Resumen del contenido incluido en la página 2
Resumen del contenido incluido en la página 3
Installation Guide 24-Port Gigabit Lite Switch Layer 2 Workgroup Switch with 24 1000BASE-T (RJ-45) Ports, and 4 Gigabit Combination (RJ-45/SFP) Ports
Resumen del contenido incluido en la página 4
ES4324 E092007-AP-R01 150200057600A
Resumen del contenido incluido en la página 5
Compliances and Safety Warnings FCC - Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful int
Resumen del contenido incluido en la página 6
CE Mark Declaration of Conformance for EMI and Safety (EEC) This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and the Amendment Directive 93/68/EEC. For the evaluation of the compliance with these Directives, the following standards were applied: RFI Emission: • Limit
Resumen del contenido incluido en la página 7
Safety Compliance Warning: Fiber Optic Port Safety When using a fiber optic port, never look at the transmit laser while it is CLASS I powered on. Also, never look directly at the fiber TX port and fiber cable LASER DEVICE ends when they are powered on. Avertissment: Ports pour fibres optiques - sécurité sur le plan optique Ne regardez jamais le laser tant qu'il est sous tension. Ne regardez DISPOSITIF LASER jamais directement le port TX (Transmission) à fibres optiques et les DE CLASSE I em
Resumen del contenido incluido en la página 8
Important! Before making connections, make sure you have the correct cord set. Check it (read the label on the cable) against the following: Power Cord Set U.S.A. and Canada The cord set must be UL-approved and CSA certified. The minimum specifications for the flexible cord are: - No. 18 AWG - not longer than 2 meters, or 16 AWG. - Type SV or SJ - 3-conductor The cord set must have a rated current capacity of at least 10 A. The attachment plug must be an earth-grounding type with NEMA 5-15P
Resumen del contenido incluido en la página 9
France et Pérou uniquement: Ce groupe ne peut pas être alimenté par un dispositif à impédance à la terre. Si vos alimentations sont du type impédance à la terre, ce groupe doit être alimenté par une tension de 230 V (2 P+T) par le biais d’un transformateur d’isolement à rapport 1:1, avec un point secondaire de connexion portant l’appellation Neutre et avec raccordement direct à la terre (masse). Cordon électrique - Il doit être agréé dans le pays d’utilisation Etats-Unis et Canada: Le cordon
Resumen del contenido incluido en la página 10
Stromkabel. Dies muss von dem Land, in dem es benutzt wird geprüft werden: Schweiz Dieser Stromstecker muß die SEV/ASE 1011Bestimmungen einhalten. Europe Das Netzkabel muß vom Typ HO3VVF3GO.75 (Mindestanforderung) sein und die Aufschrift oder tragen. Der Netzstecker muß die Norm CEE 7/7 erfüllen (”SCHUKO”). Warnings and Cautionary Messages Warning: This product does not contain any serviceable user parts. Warning: Installation and removal of the unit must be carried out by qual
Resumen del contenido incluido en la página 11
Environmental Statement The manufacturer of this product endeavours to sustain an environmentally-friendly policy throughout the entire production process. This is achieved though the following means: • Adherence to national legislation and regulations on environmental production standards. • Conservation of operational resources. • Waste reduction and safe disposal of all harmful un-recyclable by-products. • Recycling of all reusable waste content. • Design of products to maximize recyclable
Resumen del contenido incluido en la página 12
viii
Resumen del contenido incluido en la página 13
Contents Chapter 1: Introduction 1-1 Overview 1-1 Switch Architecture 1-2 Network Management Options 1-2 Description of Hardware 1-2 10/100/1000BASE-T Ports 1-2 SFP Slots 1-2 Port and Power Status LEDs 1-3 Power Supply Socket 1-4 Features and Benefits 1-4 Connectivity 1-4 Expandability 1-4 Performance 1-4 Management 1-5 Chapter 2: Network Planning 2-1 Introduction to Switching 2-1 Application Examples 2-2 Collapsed Backbone 2-2 Central Wiring Closet 2-3 Remote Connections with Fiber Cable 2-4 Ma
Resumen del contenido incluido en la página 14
Contents Chapter 4: Making Network Connections 4-1 Connecting Network Devices 4-1 Twisted-Pair Devices 4-1 Cabling Guidelines 4-1 Connecting to PCs, Servers, Hubs and Switches 4-2 Network Wiring Connections 4-2 Fiber Optic SFP Devices 4-4 Connectivity Rules 4-6 1000BASE-T Cable Requirements 4-6 1000 Mbps Gigabit Ethernet Collision Domain 4-6 100 Mbps Fast Ethernet Collision Domain 4-7 10 Mbps Ethernet Collision Domain 4-7 Cable Labeling and Connection Records 4-8 Appendix A: Troubleshooting A-1
Resumen del contenido incluido en la página 15
Tables Table 1-1 Port Status LEDs 1-3 Table 1-2 Power Status LED 1-3 Table 4-1 Maximum 1000BASE-T Gigabit Ethernet Cable Length 4-6 Table 4-2 Maximum 1000BASE-SX Fiber Optic Cable Length 4-6 Table 4-3 Maximum 1000BASE-LX Fiber Optic Cable Length 4-6 Table 4-4 Maximum 1000BASE-LH Fiber Optic Cable Length 4-6 Table 4-5 Maximum Fast Ethernet Cable Length 4-7 Table 4-6 Maximum Ethernet Cable Length 4-7 Table A-1 Troubleshooting Chart A-1 Table B-1 10/100BASE-TX MDI and MDI-X Port Pinouts B-2 Table B
Resumen del contenido incluido en la página 16
Figures Figure 1-1 Front Panels 1-1 Figure 1-2 Rear Panel 1-1 Figure 1-3 Por and Power LEDs 1-3 Figure 1-4 Power Supply Socket 1-4 Figure 2-1 Collapsed Backbone 2-2 Figure 2-2 Central Wiring Closet 2-3 Figure 2-3 Remote Connections with Fiber Cable 2-4 Figure 2-4 Making VLAN Connections 2-5 Figure 3-1 RJ-45 Connections 3-2 Figure 3-2 Attaching the Brackets 3-3 Figure 3-3 Installing the Switch in a Rack 3-4 Figure 3-4 Attaching the Adhesive Feet 3-4 Figure 3-5 Inserting an SFP Transceiver into a
Resumen del contenido incluido en la página 17
Chapter 1: Introduction Overview The ES4324 is an intelligent Layer 2 switch with 24 10/100/1000BASE-T ports, four * of which are Gigabit combination ports that are shared with four SFP transceiver slots (see Figure 1-1, Ports 21-24). Port Status Indicators 10/100/1000 Mbps RJ-45 Ports 12 3 4 5 67 8 910 11 12 21 22 23 24 13 14 15 16 17 18 19 20 21 22 23 24 1000BASE-T/SFP Ports Figure 1-1 Front Panels 100-240V ~50-60Hz 0.8A Power Socket Figure 1-2 Rear Panel * If an SFP transceiver is plugg
Resumen del contenido incluido en la página 18
Introduction 1 Switch Architecture The switch employs a wire-speed, non-blocking switching fabric. This permits simultaneous wire-speed transport of multiple packets at low latency on all ports. The switch also features full-duplex capability on all ports, which effectively doubles the bandwidth of each connection. The switch uses store-and-forward switching to ensure maximum data integrity. With store-and-forward switching, the entire packet must be received into a buffer and checked for v
Resumen del contenido incluido en la página 19
Description of Hardware 1 Port and Power Status LEDs The switch includes a display panel for key system and port indications that simplify installation and network troubleshooting. The LEDs, which are located on the front panel for easy viewing, are shown below and described in the following tables. Power Status LED Port Status LEDs Figure 1-3 Port and Power LEDs Table 1-1 Port Status LEDs LED Condition Status Fast Ethernet Ports (Ports 1-24) Link/Act On/Flashing Green Port has established a
Resumen del contenido incluido en la página 20
Introduction 1 Power Supply Socket The power socket is located on the rear panel of the switch. The standard power socket is for the AC power cord. 100-240V ~50-60Hz 0.8A Figure 1-4 Power Supply Socket Features and Benefits Connectivity • 24 10/100/1000 Mbps ports for easy Gigabit Ethernet integration and for protection of your investment in legacy LAN equipment. • Auto-negotiation enables each RJ-45 port to automatically select the optimum communication mode (half or full duplex) if this fe
