Manual de instrucciones de Monarch SLS-115/230

Resumen del contenido incluido en la página 1

CE DECLARATION OF CONFORMITY
MONARCH INSTRUMENT
Instruction Manual
As Manufacturer:
Monarch Instrument
Division of Monarch International Inc.
15 Columbia Drive, Amherst NH 03031 USA
declares under Monarch’s sole responsibility that the product:
SLS - Smart Laser Sensor
to which this declaration relates is in conformity with the following directives and
standards when installed and operated in accordance with the user manual:
Directives: EMC 89/336/EEC
Low Voltage 73/23/EEC
Standards: EMC:

Resumen del contenido incluido en la página 2

Examples: SAFEGUARDS AND PRECAUTIONS 1234.56 123456. _ _ _ _0.0 ( _ = space character) 10.0 CHARGING Slide the Power switch (8) to the Off/Charge position and plug in the WARNING - This product emits a visible beam of laser charger. The Power LED (4) will blink red while the unit is fast charging. light. Avoid exposure to the laser radiation. The use of The Power LED will blink amber when slow (trickle) charging. It will be optical viewing aids (binoculars, for example) may solid

Resumen del contenido incluido en la página 3

To change the setting, move the Polarity switch (5) to the left (positive TABLE OF CONTENTS TABLE OF CONTENTS pulse) for a white target or to the right (negative pulse) for a black target. Turn the Sensitivity Adjust knob (7) to Max. Press and hold the Learn/ Gain button (6) until the Auto/Gain LED (3) blinks. 1.0 SMART LASER SENSOR SPECIFICATIONS ............. 1 8.0 AIMING THE LASER 2.0 OVERVIEW ................................................................. 4 The proper operation of the Las

Resumen del contenido incluido en la página 4

In many applications, this is all Number of blinks Gain 1.0 SMART LASER SENSOR SPECIFICATIONS that is needed. In cases where the 1 Strong Signal X 1 Laser Specifications: 2 X 2 target is marginal, the user may 3 X 4 need to manually adjust the Classification: Class 3R (per IEC 60825-1 Ed 1.2 2001-8) 4 X 5 sensitivity after trying the Auto Complies with FDA performance standards for laser products except for 5 X 8 mode. deviations pursuant to Laser Notice No. 50, dated July 26, 2001. 6 X

Resumen del contenido incluido en la página 5

Max RPM: 500,000 RPM 6.0 OPERATION Min. Trigger Duration: 10 µ sec Note: Refer to Figure 3 for switch and button locations. Indicators: LEDs for On Target, Laser On, Auto/Gain, Power/Charge Turn the unit on by moving the Power switch (8) to the On position. The unit may be operated from the internal batteries and/or the charger/power Modes: Normal (manual) or Auto, and charging supply. The internal batteries will be trickle charged when using the AC Normal mode – manual adjustment of sensitivi

Resumen del contenido incluido en la página 6

Pulse Output (continued): The output socket on the unit has the following connections: Polarity: Positive or Negative pulse (switch selectable) Pin Description Wire Color (of cable) RS232: Transmit Out – ASCII value of RPM (Accuracy ± 1 RS232 Receive (input to Red sensor) 0.002% of reading) 2 Common Orange [BNC –] Settings: 9600 baud, 8 bits, 1 stop, No Parity 3 SO (PNP Output) Yellow [BNC +] TTL compatible output Connector: Circular DIN 5 Socket - Common, (Outputs) SO, OC, 4 R

Resumen del contenido incluido en la página 7

4.5 If after completing step 4.4, the On Target LED (1) blinks Weight: 10.6 oz (300.5 grams) excluding cable and charger erratically or not at all, rotate the Sensitivity Adjust knob (7) Compliance: CE 93/68/EEC EMC directive (EN 61326:2001) slowly from 1 to 9 until the LED blinks regularly or is on solid. IEC 61010-1 2001, IEC 60825-1 2001, CFR 1040.10 and 4.6 If after completing steps 4.1-4.5, the On Target LED (1) blinks 1040.11 except for deviations pursuant to Laser Notice No. 50, erratica

Resumen del contenido incluido en la página 8

Charge position: Blinks RED when fast charging for very 3.0 INDICATORS AND SWITCHES low batteries. 56 1 Blinks AMBER when slow charging. Steady AMBER when the batteries are fully charged. 2 5. Polarity switch Selects either a positive or negative 7 output pulse. 6. Learn/Gain button In Auto Mode: Press and hold until the On Target LED 3 blinks regularly or is on solid. 4 In Manual Mode: Press to change gain ranges. 8 7. Sensitivity Adjust knob Turn fully counterclockwise to select Figure 3 Smar