Resumen del contenido incluido en la página 1
AUDIO/VIDEO CONTROL RECEIVER
RX-5060B
TA/NEWS/INFO
DISPLAY MODE
For Customer Use:
Enter below the Model No. and Serial
INSTRUCTIONS
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1507-001A
[J]
Cover_RX-5060B[J].p65 3 05.11.28, 19:58
Resumen del contenido incluido en la página 2
Warnings, Cautions and Others/ Mises en garde, précautions et indications diverses For U.S.A CAUTION RISK OF ELECTRIC SHOCK This equipment has been tested and found to comply with the limits DO NOT OPEN for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. harmful interference in a residential installation. DO NOT REMOVE COVER (OR
Resumen del contenido incluido en la página 3
Table of Contents Adjusting Sound ........................................ 21 Parts Identification ...................................... 2 Getting Started........................................... 4 Basic Adjustment Items ............................................................ 21 Basic Procedure ........................................................................ 21 Before Installation ...................................................................... 4 7 Adjusting the Equalizatio
Resumen del contenido incluido en la página 4
Parts Identification Front Panel 2 34 5 6 789p q 1 MASTER VOLUME RX—6030V AUDIO/VIDEO CONTROL RECEIVER STANDBY SURROUND DIMMER STANDBY/ON DSP INPUT DIGITAL DUALMONO 3D - PHONIC VIRTUAL SB TUNED STEREO AUTO MUTING SLEEP H.PHONE PRO LOGIC DSP DIGITAL EQ INPUT ATT VOLUME SURROUND/DSP OFF 96/24 INPUT ANALOG SB INPUT ATT MULTI JOG AUX DVD VCR TV SOUND CD TAPE/CDR FM AM SETTING ADJUST SOURCE NAME QUICK SPEAKER PHONES EXIT SPEAKERS SUBWOOFER OUT FM/AM TUNING FM/AM PRESET FM MODE MEMORY SE
Resumen del contenido incluido en la página 5
See pages in parentheses for details. Remote Control 1 TV/CATV selector (31) 2 Number buttons for selecting preset channels (15, 29) Number buttons for sound adjustment (22, 29) TV CATV Number buttons for operating audio/video components (29 – 32) A/V CONTROL STANDBY/ON RECEIVER 1 3 SOUND button (22, 29) TEST FRONT L FRONT R AUDIO 4 REC PAUSE button (30, 32) 1 2 3 5 Source selection buttons (9, 10) EFFECT CENTER SUBWFR TV/CATV 4 5 6 TAPE/CDR, CD, DVD, AUX, FM/AM, TV SOUND, VCR = 2 MENU SURR L S
Resumen del contenido incluido en la página 6
Do not connect the AC power cord until all other connections have been made. Getting Started This section explains how to connect audio/video components and speakers to the receiver, and how to connect the power supply. Notes: Before Installation • Supplied batteries are for the initial setup. Replace for continued use. General Precautions • After replacing the batteries, set the manufacturers’ codes again • Be sure your hands are dry. (see pages 31 and 32). • Turn the power off to all component
Resumen del contenido incluido en la página 7
Do not connect the AC power cord until all other connections have been made. AM antenna connections Connecting the Speakers and Subwoofer You can connect five speakers (a pair of front speakers, a center speaker, and a pair of surround speakers) and a subwoofer. AM Loop Antenna CAUTIONS: (supplied) • Use only the speakers of the SPEAKER IMPEDANCE indicated by the speaker terminals. AM EXT • Do not connect more than one speaker to each speaker AM terminal. LOOP Snap the tabs on the loop into Conn
Resumen del contenido incluido en la página 8
Do not connect the AC power cord until all other connections Getting Started have been made. Connecting the subwoofer Connecting Audio/Video Components You can enhance the bass by connecting a subwoofer. Connect the input jack of a powered subwoofer to the rear panel, When connecting individual components, refer also to the manuals using a cable with RCA pin plugs (not supplied). supplied with them. Analog Connections Audio component connections Use the cables with RCA pin plugs (not supplied).
Resumen del contenido incluido en la página 9
Do not connect the AC power cord until all other connections have been made. Video component connections DVD player Use the cables with RCA pin plugs (not supplied). Connect the white plug to the audio left jack, the red plug to the audio right jack, and the yellow plug to the video jack. VCR RIGHT LEFT DVD DVD IN IN AUDIO L OUT R L (REC) R VCR OUT IN (REC) (PLAY) VCR IN (PLAY) DVD player R DVD L A B A B C D Å To composite video output ı To left/right front channel audio output (or to audio-mixe
Resumen del contenido incluido en la página 10
Do not connect the AC power cord until all other connections Getting Started have been made. Digital Connections Notes: By connecting the receiver and the source component through the • When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components: digital terminals, sound reproduction quality will be much improved. – DIGITAL 1 (coaxial): For DVD player In addition, you can enjoy multi-channel reproduction and some – DIGITAL 2 (optical): For CD playe
Resumen del contenido incluido en la página 11
Basic Operations The following operations are commonly used when you play any sound sources. Operations hereafter will be explained using the buttons on the front panel. You can also use the buttons on the remote control for the same functions if they have the same and similar names/marks. Daily Operational Procedure Selecting the Source to Play When you have connected digital source components using the digital terminals, first change the input mode for these components to the digital input mod
Resumen del contenido incluido en la página 12
Basic Operations Speaker and signal indicators on the display Selecting different sources for picture and sound By checking the following indicators, you can easily confirm which speakers you are activating and which signals are coming into this While watching pictures from a video source, you can listen to receiver. sound of an audio source. • Once you have selected a video source, pictures of the selected Speaker indicators Signal indicators source are sent to the TV until you select another v
Resumen del contenido incluido en la página 13
Listening with headphones: Remote Selecting the Analog or Digital Input Mode NOT You can enjoy not only stereo software but also multi- channel software through the headphones. (Sounds are When you have connected digital source components using the both down-mixed to the front channels while playing multi-channel analog and digital terminals (see pages 6 to 8), you can select the software.) input mode—either digital or analog—for these components. 1 Press SPEAKERS ON/OFF to deactivate the speake
Resumen del contenido incluido en la página 14
Basic Operations When playing software encoded with Dolby Digital or DTS, the Remote Attenuating the Input Signal NOT following symptoms may occur: • Sound does not come out at the beginning of playback. When the input level of the analog source is too high, the sounds • Noise comes out while searching for or skipping chapters or will be distorted. If this happens, you need to attenuate the input tracks. signal level to prevent the sound distortion. In this case, press INPUT DIGITAL repeatedly t
Resumen del contenido incluido en la página 15
The following basic operations are possible only using the Recording a source remote control. You can record any sources playing through the receiver to a cassette deck (or a CD recorder) connected to the TAPE/CDR jacks and the VCR connected to the VCR jacks at the same time. While recording, you can listen to the selected sound source at whatever sound level you like without affecting the sound levels of the recording. Note: TA/NEWS/INFO SLEEP The output volume level, Midnight Mode (see page 19
Resumen del contenido incluido en la página 16
Receiving Radio Broadcasts You can browse through all the stations or use the preset function to go immediately to a particular station. Remote Tuning in to Stations Manually Using Preset Tuning NOT 1 Press FM or AM to select the band. Once a station is assigned to a channel number, the station can be quickly tuned in. You can preset up to 30 FM and 15 AM stations. AUTO MUTING VOLUME To store the preset stations Remote NOT Before you start, remember... There is a time limit in doing the followi
Resumen del contenido incluido en la página 17
To tune in a preset station Selecting the FM Reception Mode On the front panel: When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast. 1 Press FM or AM to select the band. • You can store the FM reception mode for each preset station (see page 14). 2 Press FM/AM PRESET 5 or ∞ until you find the channel you want. While listening to an FM station, press FM MODE. • Pressing FM/AM PRESET 5 increases the number. • Each time you p
Resumen del contenido incluido en la página 18
Basic Settings Some of the following settings are required after connecting and positioning your speakers while others will make operations easier. You can use QUICK SPEAKER SETUP to easily set up your speaker configuration. Remote 5 Press in MULTI JOG (PUSH SET). Quick Speaker Setup NOT “COMPLETE” appears on the display, then goes back to the source indication. Quick Speaker Setup helps you to easily and quickly register the speaker size and speaker distance according to your listening room Not
Resumen del contenido incluido en la página 19
Remote Basic Setting Items Basic Procedure NOT On the following pages, you can adjust the following items: • You can only select the items currently available. For details, see the explanation of each item. Items To do See page SUBWOOFER* Register your subwoofer. 18 FRNT SPEAKERS* Register your front speaker size. 18 CNTR SPEAKER* Register your center speaker size. 18 Before you start, remember... There is a time limit in doing the following steps. If the setting is SURR SPEAKERS* Register your
Resumen del contenido incluido en la página 20
Basic Settings Setting the Speakers ¶ Speaker distance—FRONT L DIST, FRONT R DIST, CENTER DIST, SURR L DIST, SURR R DIST To obtain the best possible surround effect from the Surround and Set the distance from the listening point within the range of DSP modes, register the setting about the speaker arrangement after 0.3 m (1 ft) to 9.0 m (30 ft), in 0.3 m (1 ft) intervals. all connections are completed. • When shipped from the factory, distance for each speaker is • If you have used Quick Speake
