Resumen del contenido incluido en la página 1
RXV750_U_cv.fm Page 1 Monday, January 19, 2004 10:04 AM
U
SPECIFICATIONS
AUDIO SECTION VIDEO SECTION
• Minimum RMS Output Power for Front, Center, Surround, Video Signal Type ......................................................... PAL/NTSC
Surround back
Signal to Noise Ratio ............................................................. 50 dB
20 Hz to 20 kHz, 0.06% THD, 8 Ω ....................................100 W
Frequency Response (MONITOR OUT)
Maximum Power (EIAJ)
Composite, S-Vi
Resumen del contenido incluido en la página 2
00_RXV750_U_EN.book Page i Tuesday, February 17, 2004 10:08 AM IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 10 Ventilation – Slots and openings in the cabinet are provided CAUTION for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these RISK OF ELECTRIC SHOCK openings must not be blocked or covered. The openings DO NOT OPEN should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. Thi
Resumen del contenido incluido en la página 3
00_RXV750_U_EN.book Page ii Tuesday, February 17, 2004 10:08 AM IMPORTANT SAFETY INSTRUCTIONS d) If the product does not operate normally by following 24 Outdoor Antenna Grounding – If an outside antenna or the operating instructions. Adjust only those controls cable system is connected to the product, be sure the antenna that are covered by the operating instructions as an or cable system is grounded so as to provide some improper adjustment of other controls may result in protection agai
Resumen del contenido incluido en la página 4
00_RXV750_U_EN.book Page iii Tuesday, February 17, 2004 10:08 AM CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this 14 Do not attempt to modify or fix this unit. Contact manual carefully. Keep it in a safe place for future qualified YAMAHA service personnel when any reference. service is needed. The cabinet should never be opened for any reasons. 2 Install this sound system in a well ventilated,
Resumen del contenido incluido en la página 5
BASIC SOUND FIELD ADVANCED ADDITIONAL INTRODUCTION PREPARATION OPERATION PROGRAMS OPERATION INFORMATION English 00_RXV750_U_EN.book Page 1 Tuesday, February 17, 2004 10:08 AM CONTENTS INTRODUCTION SOUND FIELD PROGRAMS FEATURES............................................................. 2 SOUND FIELD PROGRAM GETTING STARTED............................................ 3 DESCRIPTIONS...............................................45 Supplied accessories ........................................
Resumen del contenido incluido en la página 6
00_RXV750_U_EN.book Page 2 Tuesday, February 17, 2004 10:08 AM FEATURES FEATURES Built-in 7-channel power amplifier Other features ◆ Minimum RMS output power ◆ YPAO: YAMAHA Parametric Room Acoustic (0.06% THD, 20 Hz – 20 kHz, 8Ω ) Optimizer for automatic speaker setup Front: 100 W + 100 W ◆ 192-kHz/24-bit D/A converter Center: 100 W ◆ A SET MENU which provides you with items for Surround: 100 W + 100 W optimizing this unit for your audio/video system Surround back: 100 W + 100 W ◆ 8 additio
Resumen del contenido incluido en la página 7
INTRODUCTION English 00_RXV750_U_EN.book Page 3 Tuesday, February 17, 2004 10:08 AM GETTING STARTED GETTING STARTED Supplied accessories Please check that you received all of the following parts. Remote control Batteries (4) AM loop antenna Optimizer microphone (AAA, R03, UM-4) TRANSMIT RE-NAME CLEAR LEARN SYSTEM POWER STANDBY SLEEP INPUT MODE AB PHONO MULTI CH IN V-AUX TUNER MD/CD-R CD DTV/CBL VCR 1 DVR/VCR2 DVD SELECT POWER POWER AMP TV AV REC AUDIO DISC SKIP Indoor FM antenna Indoor FM an
Resumen del contenido incluido en la página 8
00_RXV750_U_EN.book Page 4 Tuesday, February 17, 2004 10:08 AM CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel 1426 35 78 90 (U.S.A. model) VOLUME OPTIMIZER MIC PRESET/TUNING FM/AM A/B/C/D/E l PRESET/TUNING h MEMORY TUNING MODE EDIT NEXT LEVEL MAN'L/AUTO FM AUTO/MAN'L MONO PROGRAM INPUT PHONES SPEAKERS STRAIGHT TONE CONTROL INPUT MODE MULTI CH PURE DIRECT A B INPUT STANDBY VIDEO AUX /ON EFFECT SILENT CINEMA S VIDEO VIDEO L AUDIO R OPTICAL RDS MODE/FREQ EON PTY SEEK MODE STAR
Resumen del contenido incluido en la página 9
INTRODUCTION English 00_RXV750_U_EN.book Page 5 Tuesday, February 17, 2004 10:08 AM CONTROLS AND FUNCTIONS ■ Europe model only A PHONES (SILENT CINEMA) jack Outputs audio signals for private listening with L RDS MODE/FREQ headphones. When you connect headphones, no signals Press this button when the unit is receiving an RDS station are output to the OUTPUT jacks or to the speakers. to cycle the display between the PS mode, PTY mode, RT All Dolby Digital and DTS audio signals are mixed dow
Resumen del contenido incluido en la página 10
00_RXV750_U_EN.book Page 6 Tuesday, February 17, 2004 10:08 AM CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the 3 STANDBY remote control used to control this unit. To operate other Sets this unit in the standby mode. components, see “REMOTE CONTROL FEATURES” on 4 SYSTEM POWER page 62. Turns on the power of this unit. 1 A 5 Input selector buttons B Select the input source and change the control area. 2 TRANSMIT RE-NAME CLEAR LEARN C 3 6 Display
Resumen del contenido incluido en la página 11
INTRODUCTION English 00_RXV750_U_EN.book Page 7 Tuesday, February 17, 2004 10:08 AM CONTROLS AND FUNCTIONS F MULTI CH IN ■ Europe model only Selects MULTI CH INPUT when using an external Q RDS tuning buttons decoder (etc.). FREQ/RDS G SELECT k/n Press this button when the unit is receiving an RDS station Selects another component that you can control to cycle the display between the PS mode, PTY mode, RT independently of the input component selected with the mode, CT mode (if the station
Resumen del contenido incluido en la página 12
00_RXV750_U_EN.book Page 8 Tuesday, February 17, 2004 10:08 AM CONTROLS AND FUNCTIONS Using the remote control The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation. VOLUME OPTIMIZER MIC PRESET/TUNING FM/AM A/B/C/D/E l PRESET/TUNING h MEMORY TUNING MODE EDIT NEXT LEVEL MAN'L/AUTO FM AUTO/MAN'L MONO PROGRAM INPUT PHONES SPEAKERS STRAIGHT TONE CONTROL INPUT MODE MULTI CH PURE DIRECT
Resumen del contenido incluido en la página 13
INTRODUCTION English 00_RXV750_U_EN.book Page 9 Tuesday, February 17, 2004 10:08 AM CONTROLS AND FUNCTIONS Front panel display 123456 78 90AB 96 DVR/VCR2 VCR-1 V-AUX DTV/CBL DVD MD/CD-R TUNER CD PHONO t 24 SILENT CINEMA NIGHT ZONE2 PTY HOLD AUTO TUNED STEREO MEMORY MUTE VOLUME MATRIX DISCRETE SP VIRTUAL OPTIMIZER A B HiFi DSP q DIGITAL SLEEP PS PTY RT CT EON dB q EX q PL 96/24 ft LC R q PL q PL x mS LFE SL SB SR PCM dB C D E FG HI JM KL N (U.S.A., Canada and (Europe model only) O P Australia
Resumen del contenido incluido en la página 14
00_RXV750_U_EN.book Page 10 Tuesday, February 17, 2004 10:08 AM CONTROLS AND FUNCTIONS K 96/24 indicator Lights up when a DTS 96/24 signal is input to this unit. L LFE indicator Lights up when the input signal contains the LFE signal. M Input channel indicators Indicate the channel components of the current digital input signal. N Presence and surround back speaker indicators Indicate the connection of presence and/or surround back speakers when using the SPEAKER LEVEL setting (see page 5
Resumen del contenido incluido en la página 15
INTRODUCTION English 00_RXV750_U_EN.book Page 11 Tuesday, February 17, 2004 10:08 AM CONTROLS AND FUNCTIONS Rear panel 12 3 47 5 6 8 COMPONENT VIDEO TUNER PR PB Y DVD 75Ω UNBAL. AM FM GND ANT AUDIO AUDIO ANT DTV /CBL PHONO VIDEO GND VIDEO S VIDEO REMOTE DIGITAL MONITOR INPUT OUT CD DVD DVD ZONE 2 PRE OUT AC OUTLETS SWITCHED CENTER IN COAXIAL IN DTV (PLAY) /CBL CD CONTROL OUT MD /CD-R OUT OPTICAL OUT DTV/CBL IN (REC) +12V PRESENCE VCR 1 SUB SURROUND /ZONE 2 15mA MAX. FRONT SURROUND WOOFER B
Resumen del contenido incluido en la página 16
00_RXV750_U_EN.book Page 12 Tuesday, February 17, 2004 10:08 AM SPEAKER SETUP SPEAKER SETUP Surround speakers (SR and SL) Speaker placement The surround speakers are used for effect and surround sounds. Place these speakers behind your listening The speaker layout below shows the standard ITU-R position, facing slightly inwards, about 1.8 m (6 ft) above speaker setting. You can use it to enjoy CINEMA DSP and the floor. multi-channel audio sources. Surround back speakers (SBR and SBL) PL
Resumen del contenido incluido en la página 17
PREPARATION English 00_RXV750_U_EN.book Page 13 Tuesday, February 17, 2004 10:08 AM SPEAKER SETUP Speaker connections 5 Tighten the knob to secure the wire. Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are 3 faulty, no sound will be heard from the speakers, and if the 4 polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTION 5 If you will use 6 ohm speakers, be sure to set
Resumen del contenido incluido en la página 18
00_RXV750_U_EN.book Page 14 Tuesday, February 17, 2004 10:08 AM SPEAKER SETUP Subwoofer Presence speakers Surround speakers system Right Left Right Left 1 23 4 5 PRE OUT CENTER PRESENCE SUB SURROUND /ZONE 2 FRONT SURROUND WOOFER BACK SPEAKERS A SURROUND B FRONT CENTER SURROUND BACK (U.S.A. model) 6 7 10 8 9 Front speakers Center (B) speaker Right Left Surround back speakers Right Left Front speakers (A) You can connect both surround back and presence speakers to this unit, but they do
Resumen del contenido incluido en la página 19
PREPARATION English 00_RXV750_U_EN.book Page 15 Tuesday, February 17, 2004 10:08 AM SPEAKER SETUP ■ FRONT terminals Connect one or two speaker systems to these terminals. If you use only one speaker system, connect it to either the FRONT A or B terminals. Note The Canada model cannot output to two separate speaker systems 2 simultaneously. 3 6 ■ CENTER terminals 8 Connect a center speaker to these terminals. 7 1 ■ SURROUND terminals 4 Connect surround speakers to these terminals. 9 ■ SU
Resumen del contenido incluido en la página 20
00_RXV750_U_EN.book Page 16 Tuesday, February 17, 2004 10:08 AM CONNECTIONS CONNECTIONS Dust protection cap Before connecting components Pull out the cap from the optical jack before you connect the fiber optic cable. Do not discard the cap. When you are not using the optical jack, be sure to put the cap back in CAUTION place. This cap protects the jack from dust. Do not connect this unit or other components to the mains power until all connections between components are complete. ■ Cabl
