Resumen del contenido incluido en la página 1
Resumen del contenido incluido en la página 2
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfere
Resumen del contenido incluido en la página 3
Table of Contents Introduction..............................................................................................................................................................4 Differences...............................................................................................................................................................4 Installation..............................................................................................................................
Resumen del contenido incluido en la página 4
Introduction The 7001 RF Terminal is a low cost, easy-to-use radio frequency interactive terminal which communicates with PCs (or any computer) by RS-232 serial port. This new terminal offers unprecedented power and ease of use, while maintaining compatibility with programs written for the older Worth Data Terminals. The list of fantastic features include: • Low Cost • Up to 3.3 mile range, LOS (10 x the competition) • 64 Terminals per Base Station • Spread Spectrum frequency hopping avoids i
Resumen del contenido incluido en la página 5
• Speaker volume is controlled by the RF Terminal's Setup menu. • The 7000 Series does not have a choice of battery types. It comes with a built-in Li-Ion rechargeable battery. The battery is charged by the same power supply that is used with the Base Station. An adapter cable is provided to allow connection to the RF Terminal. • Voice prompts are now recorded on the PC and uploaded to the RF Terminal using the Voice Prompt utility. Up to 99 voice prompts can be stored in the RF Terminal
Resumen del contenido incluido en la página 6
Installation Components The components in your R/F Terminal system will vary according to the configuration of your system. Your R/F Terminal shipment should contain at least: • An RF Terminal T7001 or LT7001 - If the R/F Terminal is an LT7001 model, it will have an integrated laser scanner built-in to the body of the terminal. • Serial Cable – for programming and voice prompt upload. • 5V Power Supply – battery charger with adapter cable. • Utilities CD ROM – demo programs, DLL, and firmware
Resumen del contenido incluido en la página 7
out to the serial port, which then passes this data on to the Base station. The Base station then broadcasts the message to the terminal, causing the terminal to display the message to the user. The Base station is not machine-sensitive (it needs a standard RS-232 serial port) nor is it operating system dependent (you just need to be able to read and write to the serial port as a separate device). Connecting the Base station… If you specified a 25 pin cable (part #F34) or a 9 pin cable (par
Resumen del contenido incluido en la página 8
R/F Terminal Operation Using the RF Terminal keypad… The R/F Terminal is turned on by pressing the green ON/OFF button located in the upper left- hand corner of the R/F Terminal keypad. It is a good idea to fully charge the R/F Terminal before you use it the first time to make sure the battery charged. See below for more information on battery charging. The R/F Terminal has a Shut Down Time feature that allows you to determine the length of time the R/F Terminal must be inactive before automa
Resumen del contenido incluido en la página 9
be significantly shorter than when the device was new, the battery should be replaced. If you have the optional “gun” handle with the extended battery then both batteries should be replaced at the same time. The main battery is a common digital camera battery sold as Fujifilm NP-120 or Pentax D-LI7. We use a high quality Japanese Li-Ion cell in our OEM pack that we supply with the R/F Terminal. You can obtain a replacement from Worth Data (P/N: L02) . Our pack is rated at 1950 mAh and pr
Resumen del contenido incluido en la página 10
R/F Terminal Menu Functions Upon power-up, the R/F Terminal displays the following opening screen: R/F TERMINAL LT7001 FIRMWARE: Uxxx – HWyy-Rzz USA CHANNEL: 0 TERM ID: 0 HIT ANY KEY TO CONTINUE (The opening screen can be bypassed upon power up. See Chapter 2) • On second line on the screen, FIRMWARE: Uxxx, gives the firmware revision number. The letter U indicates USA frequency. Rzz refers to the version of the radio processor firmware. • HWyy indicates the version of the hardware. • TERM I
Resumen del contenido incluido en la página 11
step. You can use the F1 key to exit and SIGN OUT when using a Two-Way communication program running on the host computer. The entire mode menu can be skipped (see Chapter 2; RF System Setup), causing the R/F Terminal to automatically SIGN-ON or go to ONE-WAY mode on power up. Installing the RF Terminal Utilities Software The RF Terminal system ships with a CD of programs for use with the RF Terminal and Base station. You have the choice of installing the following: Windows Demo Programs and
Resumen del contenido incluido en la página 12
• R/F TERMINAL EPROM LOADER HELP • R/F TERMINAL EPROM LOADER • UNINSTALL See Appendix D; Firmware Upgrades for details on how to use the EPROM Loader programs (Windows).
Resumen del contenido incluido en la página 13
RF System Setup The RF Terminal can be configured using the Terminal Setup Menu. Most users do not need to change anything in the setup. The most commonly changed setup parameters are the Terminal ID (especially if you have more than 1 terminal) and the Channel (if you are adding an additional Base station). Factory Default RF Terminal Configuration Parameter Default Setting Parameter Default Setting RF Configuration RF Channel - 0 MSI /Plessy Code MSI - OFF Terminal ID - 0 MSI with 1 mod
Resumen del contenido incluido en la página 14
SPEAKER SETTINGS 5 LASER SETTINGS 6 LCD SETTINGS 7 OTHER SETTINGS 8 SYSTEM TOOLS 9 DONE/EXIT 0 Select the option you want to set or verify or press 0 or the F1 key to exit back to the MODE MENU. The groups in the keypad Setup Menu contain the following setup parameters: Setup Group Parameter Setup Group Parameter RF Setup RF Channel Speaker Beep Volume 1 Terminal ID 5 Beep Tone Security Code Voice Volume Skip opening screens K
Resumen del contenido incluido en la página 15
ID, select option 2 on the keypad after which a box will appear where you can enter the desired Terminal ID. Enter one character for the Terminal ID. RF Terminal Channel 0 Default Channel • The terminal's radio operates by "frequency hopping" spread spectrum. The radios hop from one frequency to another using a pseudo-random sequence. The radio goes through 26 different frequencies and then repeats the sequence – all in the 902-928 MHz band at 250 milliwatts of power. Different sequences
Resumen del contenido incluido en la página 16
• Several special keys on the RF Terminal keypad can generate a response automatically, sending a separate message to the host by simply pressing the appropriate control key (without pressing the ENTER key afterward). This allows for simple and fast scrolling by the operator. The arrow keys, Begin, End, and Search are the specific keys supported. The default setting is to require the ENTER key to be pressed before data transmission. • If you set this feature to ON, in order for the RF Termi
Resumen del contenido incluido en la página 17
• Enabling use of the Mod 43 check character requires that the last character of your bar code conform to the Mod 43 check character specifications. See Appendix E; Code 39 for more information. Enable transmission (6) will send the check digit data along with the rest of the bar code data to your computer. To use 6, you must also be using 5. • Caps Lock ON causes lower case letters read as data to be transmitted to the computer as UPPER CASE, and upper case letters to be transmitted as LOW
Resumen del contenido incluido en la página 18
UPC-E / EAN-8 Options UPC-E First Digit ON OFF 1 EAN-8 First Digit ON OFF 2 UPC-E Check Digit ON OFF 3 EAN-8 Check Digit ON OFF 4 UPC-E Expanded ON OFF 5 UPC-E1 ON OFF 6 • Use setting 1 and 2 to enable or disable the UPC-E or EAN-8 first digit. • Use setting 3 and 4 to enable or disable the UPC-E or EAN-8 check digit. The check digit is the last character and is based upon a calculation performed on the other characters. • Use setting 5 to select UPC-E0 compressed or expanded. When set to O
Resumen del contenido incluido en la página 19
the bar code data to the computer. • 2 of 5 is so susceptible to misreads that the RF Terminal adds an additional safeguard - it can be configured to look for fixed-length data only. • The default setting of 06 causes the RF Terminal to read only 2 of 5 codes that are 6 digits in length. To set the RF Terminal to read a different length, enter any two-digit number. 2 of 5 code must always be an even number of digits so the length setting must always be an even number. • Reading variable l
Resumen del contenido incluido en la página 20
Other Bar Code Options Storage Tek Label ON OFF 2 Labelcode 5 ON OFF 3 Labelcode 4 ON OFF 4 Bar Code ID's ON OFF 5 The Storage Tek Tape Label code is a proprietary variation of Code 39 code used for the storage of computer data tapes. Enabling the tape label code does not disable reading of Code 128 or Code 39 bar codes. Labelcode 5 and Labelcode 4 are proprietary bar code types used by Follet. Bar Code ID’s are characters assigned to each bar code type to identify that particular type of code
