Resumen del contenido incluido en la página 1
HTR-5730
RT
HTR-5730
AV Receiver
OWNER’S MANUAL
MANUAL DE INSTRUCCIONES
©2004 All rights reserved.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE
Resumen del contenido incluido en la página 2
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this 13 To prevent damage by lightning, disconnect the power manual carefully. Keep it in a safe place for future cord from the wall outlet during an electrical storm. reference. 14 Do not attempt to modify or fix this unit. Contact 2 Install this sound system in a well ventilated, cool, qualified YAMAHA service personnel when any dry, clean place — away from direct sunlight, heat service is needed. Th
Resumen del contenido incluido en la página 3
BASIC ADVANCED ADDITIONAL INTRODUCTION PREPARATION OPERATION OPERATION INFORMATION English CONTENTS INTRODUCTION ADVANCED OPERATION CONTENTS ............................................................ 1 SET MENU ........................................................... 37 FEATURES ............................................................. 2 Set menu list ............................................................ 37 Adjusting the items on the set menu ....................... 37 GETTING ST
Resumen del contenido incluido en la página 4
FEATURES Built-in 5-channel power amplifier Sound field features Minimum RMS output power Dolby Pro Logic/Dolby Pro Logic II decoder (0.1% THD, 1 kHz, 6Ω ) Dolby Digital/Dolby Digital + Matrix 6.1 Decoder [U.S.A. and Canada models] DTS/DTS + Matrix 6.1 Decoder Front: 100 W + 100 W CINEMA DSP: Combination of YAMAHA DSP Center: 100 W technology and Dolby Pro Logic, Dolby Digital or Surround: 100 W + 100 W DTS [Other models] Virtual CINEMA DSP Front: 90 W + 90 W SILENT CINEMA ™ Center
Resumen del contenido incluido en la página 5
INTRODUCTION English GETTING STARTED Supplied accessories Please check that you received all of the following parts. Remote control Batteries (2) Indoor FM antenna (AA, R06, UM-3) (U.S.A., Canada, China, Asia and General models) SYSTEM POWER POWER POWER STANDBY POWER TV TV AV CD MD/CD-R TUNER SLEEP DVD D-TV/CBL VCR V-AUX REC 6CH INPUT AUDIO DISC SKIP CODE SET AMP TV + + + AM loop antenna (Europe, U.K., Australia and VOL CH VOLUME – – – Korea models) MUTE INPUT MUTE HALL JAZZ ROCK ENTERTAINMENT 1
Resumen del contenido incluido en la página 6
CONTROLS AND FUNCTIONS Front panel 1 2 3 4 5 6 7 8 9 0 VOLUME RDS MODE/FREQ EON PTY SEEK MODE START STANDBY /ON PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING MEMORY TUNING MODE EDIT NEXT SET MENU MAN'L/AUTO FM AUTO/MAN'L MONO PHONES SPEAKERS STEREO PROGRAM INPUT A/B/OFF INPUT MODE 6CH INPUT EFFECT CONTROL BASS/TREBLE SILENT CINEMA RDS MODE/FREQ EON q w e rt y u i o PTY SEEK MODE START p a sd (U.K. and Europe models only) 1 STANDBY/ON 5 A/B/C/D/E Turns on this unit or sets it to the standby mode. W
Resumen del contenido incluido en la página 7
INTRODUCTION English CONTROLS AND FUNCTIONS 0 VOLUME U.K. and Europe models only Controls the output level of all audio channels. This does not affect the OUT (REC) level. p RDS MODE/FREQ Press this button when the unit is receiving an RDS q PHONES (SILENT CINEMA) station, to cycle the display mode among PS mode, PTY Allows you to enjoy DSP effects when listening with mode, RT mode, CT mode (if the station offers those headphones. RDS data service) and/or frequency display mode in turn. w SPEA
Resumen del contenido incluido en la página 8
CONTROLS AND FUNCTIONS Remote control This section describes the controls and functions of the 1 Infrared emitter remote control when it is set in AMP mode. Please make Outputs infrared control signals. Aim this emitter at the sure to select AMP mode before beginning operation. component you want to operate. See “REMOTE CONTROL FEATURES” on page 43 to operate other components with this remote control. 2 Input selector buttons Select the input source and change the control area. 7 1 3 Sound fiel
Resumen del contenido incluido en la página 9
INTRODUCTION English CONTROLS AND FUNCTIONS r MUTE Using the remote control Mutes the sound. Press again to restore the audio output The remote control transmits a directional infrared beam. to the previous volume level. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation. t 6.1/5.1 Switches on or off the Dolby Digital + Matrix 6.1 or DTS + Matrix 6.1 decoder. VOLUME RDS MODE/FREQ EON PTY SEEK STANDBY MODE START /ON y STEREO PRESET/TUNING F
Resumen del contenido incluido en la página 10
CONTROLS AND FUNCTIONS Front panel display 13 2 45 6 7 8 VCR V-AUX DTV/CBL DVD MD/CD-R TUNER CD SILENT CINEMA PTY HOLD AUTO TUNED STEREO MEMORY MUTE VOLUME NIGHT MATRIX SP VIRTUAL HiFi DSP A B DIGITAL SLEEP PS PTY RT CT EON dB PL ft L C R PL LFE SL SB SR PCM ~~~~~~~~~~~~~~ dB 90qweo rt y uip a s (U.K. and Europe models only) 1 Decoder indicators w SP A B indicator Lights up to indicate which set of front speakers is When any of this unit’s decoders function, the respective selected. Both indi
Resumen del contenido incluido en la página 11
PREPARATION English CONNECTIONS Connecting to digital jacks Before connecting components This unit has digital jacks for direct transmission of digital signals through either a coaxial or fiber optic cable. You can use the digital jacks to input PCM, Dolby CAUTION Digital and DTS bitstreams. Use digital connections if Do not connect this unit or other components to the you wish to enjoy the multi-channel sound track of DVD mains power until all connections between the material, etc. with DSP e
Resumen del contenido incluido en la página 12
CONNECTIONS Connecting another video component Connecting video components Connect the video signal output jack on your component to the VIDEO jack on this unit. Connect the audio signal output jacks on the component to the AUDIO jacks on this unit. Connecting a video monitor Connect the video input jack on your video monitor to the MONITOR OUT VIDEO jack. Connecting a recording component Connect the audio signal input jacks on your video Connecting a DVD player/digital TV/cable componen
Resumen del contenido incluido en la página 13
PREPARATION English CONNECTIONS Note Connecting audio components • Once you have connected a recording component to this unit, keep its power turned on while using this unit. If the power is Connecting a CD player off, this unit may distort the sound from other components. Connect the coaxial digital output jack on your CD player to the DIGITAL INPUT CD jack on this unit. y • Use the AUDIO jacks on this unit to connect to a CD player that does not have a COAXIAL DIGITAL OUTPUT jack, or to reco
Resumen del contenido incluido en la página 14
CONNECTIONS Connecting the antennas Both AM and FM indoor antennas are included with this Connecting the AM loop antenna unit. In general, these antennas should provide sufficient signal strength. 1 Set up the AM loop antenna, then connect it to the terminals on this unit. Connect each antenna correctly to the designated terminals. AM loop antenna Indoor FM (included) antenna (included) DEO TUNER 2 Press and hold the tab to insert the AM loop AM ANT antenna lead wires into the AM ANT and GND G
Resumen del contenido incluido en la página 15
PREPARATION English CONNECTIONS Connecting an external decoder This unit is equipped with 6 additional input jacks (FRONT left and right, CENTER, SURROUND left and right and SUBWOOFER) for discrete multi-channel input from a component equipped with a multi-channel decoder and 6 channel output jacks such as a DVD/Super Audio CD player. 6CH INPUT AUDIO VIDEO TUNER R L FRONT DVD AM ANT DTV DIGITAL SURROUND /CBL INPUT GND CD 3 SUB CENTER WOOFER V-AUX 75Ω UNBAL. COAX AL LR L R CENTER CENTER SURR SURR
Resumen del contenido incluido en la página 16
CONNECTIONS Subwoofer Connecting the speakers The use of a subwoofer, such as the YAMAHA Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels, Speaker placement but also for high fidelity reproduction of the LFE (low - frequency effect) channel included in Dolby Digital and DTS software. The position of the subwoofer is not so FL FR C critical, because low bass sounds are not highly directional. But it is better to place the
Resumen del contenido incluido en la página 17
PREPARATION English CONNECTIONS Speaker connections Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTION • Use speakers with the specified impedance shown on the rear panel of this unit. • Before connecting the speakers, make sure that the power of this unit is off. • D
Resumen del contenido incluido en la página 18
CONNECTIONS Front A speaker Surround speaker Right Left Right Left 5 6 1 2 6CH INPUT AUDIO VIDEO TUNER SPEAKERS R L SURROUND R L FRONT DVD AM ANT DTV DIGITAL SURROUND /CBL INPUT GND CD 3 SUB CENTER WOOFER V-AUX 75Ω UNBAL. SURROUND : 6Ω MIN. /SPEAKER COAXIAL CLASS 2 WIRING A FM OPTICAL CD IN ANT R FRONT L DTV B VCR /CBL 2 FRONT IN R L CENTER OUT (PLAY) MD DVD 1 /CD-R OUT SUB MONITOR (REC) WOOFER OUT R L FRONT A OR B : 6Ω MIN. /SPEAKER CENTER : 6Ω MIN. /SPEAKER AUDIO OUTPUT 4 3 Subwoofer Right Lef
Resumen del contenido incluido en la página 19
PREPARATION English CONNECTIONS Connecting the power supply Turning on the power cords When all connections are complete, turn on the power of this unit. VOLTAGE SELECTOR 1 VOLUME RDS MODE/FREQ EON PTY SEEK STANDBY MODE START /ON PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING MEMORY TUNING MODE VOLTAGE EDIT NEXT SET MENU MAN'L/AUTO FM AUTO/MAN'L MONO SELECTOR PHONES SPEAKERS STEREO PROGRAM INPUT A/B/OFF INPUT MODE 6CH INPUT EFFECT CONTROL BASS/TREBLE SILENT CINEMA REAR 110V-120V URROUND) L 220V-240
Resumen del contenido incluido en la página 20
BASIC SYSTEM SETTINGS The “BASIC” menu allows you to set some of the basic “SOUND” menu parameters with a minimum of effort. If you wish to configure the unit more precisely to suit your listening environment, use the more detailed parameters from the “SOUND” menu instead of those under the “BASIC” menu (See page 38). Altering any parameters in the BASIC menu will reset all parameters in the “SOUND” menu. 4 Press u / d to change the display to the Using the basic menu setting you want to alter.
