Resumen del contenido incluido en la página 1
UCA
DISC1 DISC2 DISC3 DISC CHANGE OPEN/CLOSE
3–DISC CD CHANGER DIGITAL AUDIO
STANDBY PROGRAM B.BOOST MUSIC
STANDBY
/ON
TIMER
VOLUME
INPUT PRESET/TUNING/BAND A/B/C/D/E
/
UP
DOWN
DOLBY SURROUND
–
MINI COMPONENT SYSTEM GX 707 PRO•LOGIC
DIRECTION
OPEN/CLOSE
AUTO REVERSE CASSETTE DECK DOLBY B NR
Resumen del contenido incluido en la página 2
Explanation of Graphical Symbols CAUTION The lightning flash with arrowhead symbol, within an RISK OF ELECTRIC SHOCK equilateral triangle, is intended to alert you to the DO NOT OPEN presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient CAUTION: TO REDUCE THE RISK OF magnitude to constitute a risk of electric shock to ELECTRIC SHOCK, DO NOT REMOVE persons. COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO The exclamation point wi
Resumen del contenido incluido en la página 3
EXAMPLE OF ANTENNA GROUNDING 19 For US customers only: Outdoor Antenna Grounding – If an outside antenna is connected to this unit, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article MAST ANTENNA LEAD IN 810 of the National Electrical Code, ANSI/NFPA 70, WIRE provides information with regard to proper grounding GROUND CLAMP of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
Resumen del contenido incluido en la página 4
Unpacking l After unpacking, check that the following parts are contained. Déballage l Après le déballage, vérifier que les pièces suivantes sont incluses. DISC1 DISC2 DISC3 DISC CHANGE OPEN/CLOSE l Main unit l Front speakers 3–DISC CD CHANGER DIGITAL AUDIO l Appareil principal STANDBY PROGRAM B.BOOST MUSIC l Enceintes avant STANDBY /ON TIMER VOLUME INPUT PRESET/TUNING/BAND A/B/C/D/E / UP DOWN MINI COMPONENT SYSTEM GX–707 PRO•LOGIC DOLBY SURROUND DIRECTION OPEN/CLOSE AUTO REVERSE CASSETTE
Resumen del contenido incluido en la página 5
Setting this system Installation de ce système 20 cm 20 cm 20 cm DISC1 DISC2 DISC3 DISC CHANGE OPEN/CLOSE DISC1 DISC2 DISC3 DISC CHANGE OPEN/CLOSE 3–DISC CD CHANGER DIGITAL AUDIO 3–DISC CD CHANGER DIGITAL AUDIO STANDBY PROGRAM B.BOOST MUSIC STANDBY PROGRAM B.BOOST MUSIC STANDBY /ON STANDBY /ON TIMER TIMER VOLUME VOLUME PRESET/TUNING/BAND A/B/C/D/E PRESET/TUNING/BAND A/B/C/D/E INPUT INPUT / / UP UP DOWN DOWN MINI COMPONENT SYSTEM GX–707 MINI COMPONENT SYSTEM GX–707 DIRECTION DIRECTION
Resumen del contenido incluido en la página 6
Front panel Panneau avant Front panel LM NO DISC1 DISC2 DISC3 DISC CHANGE OPEN/CLOSE 6 1 3–DISC CD CHANGER DIGITAL AUDIO 4 5 STANDBY PROGRAM B.BOOST MUSIC STANDBY J /ON D TIMER 3 0, P VOLUME E PRESET/TUNING/BAND A/B/C/D/E INPUT C / UP F, S R, B DOWN G, U Q, A T BASS TREBLE 8 REC/ AUTO/ PHONES MODE DOLBY NR PAUSE MANUAL MEMORY RANDOM REPEAT TIME DISPLAY 7 H TIMER TIME ADJ HOUR MIN W I ` 9 K ] Z DIRECTION 2 \ Y [ OPEN/CLOSE V DOLBY B NR AUTO REVERSE CASSETTE DECK X
Resumen del contenido incluido en la página 7
Amplifier/tuner Amplificateur/tuner 1 Display 8 BASS/TREBLE [p. 32] E INPUT( / ) [p. 13, 20, Panneau d'affichage 24, 26] 9 Front cover TUNER → TAPE → CD 2 Remote control sensor Couvercle avant ↑↓ Capteur de télécommande AUX/MD ← VCR ← VIDEO 0 / [p. 20, 22] 3 TIMER F HOUR [p. 10, 37] A A/B/C/D/E [p. 22] 4 STANDBY [p. 13] G MIN [p. 10, 37] B PRESET/TUNING/BAND 5 B. BOOST [p. 32] [p. 20] H DISPLAY [p. 10, 37] 6 PROGRAM [p. 35] C VOLUME [p. 32] I MEMORY [p. 21, 22] TIME ADJ [p. 10] 7 PHONES
Resumen del contenido incluido en la página 8
Remote control Telecommande 1 POWER POWER 7 1 2 3 1 2 3 E 2 1 2 3 1 2 3 4 5 6 4 5 6 4 5 6 4 5 6 7 8 9 7 8 9 7 8 7 8 + 0 TUNER I0 0 + 0 TUNER I0 9 G PRESET PRESET 9 PRESET PRESET TIME PROG R.TIME TIME PROG R.TIME N F A B C 3 I A B C EDIT DISC SKIP MODE EDIT DISC SKIP MODE M H D E D E J J CD K CD / / L DIRECTION TAPE REC/ PAUSE TEST S 4 CENTER/ 6 — LEVEL REAR/ DELAY DIRECTION 5 Q PROGRAM MUSIC A B P P SLEEP INPUT TAPE REC/ PAUSE TEST 8 D O R CENTER/ C — LEVEL REAR/ DE
Resumen del contenido incluido en la página 9
Amplifier/tuner Amplificateur/tuner 1 Transmission window 7 POWER [p. 13] Fenêtre de transmission 8 SLEEP [p. 38] [p. 5] 9 PRESET ( / ) [p. 20, 22] 2 Numeric buttons Touches numériques 0 TUNER [p. 20] [p. 22] A PROGRAM [p. 35] 3 A, B, C, D, E [p. 22] B MUSIC [p. 33] 4 TEST [p. 11] C VOLUME [p. 32] 5 CENTER/REAR/DELAY [p. 36] D INPUT [p. 13, 20, 24, 26] 6 LEVEL (–/+) [p. 36] TUNER → TAPE → CD ↑↓ AUX/MD ← VCR ← VIDEO CD player Lecteur de disque compact E Numeric buttons H MODE [p. 14]
Resumen del contenido incluido en la página 10
English Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product. Contents Precautions....................................... 1 Recording ....................................... 26 Basic recording ................................................. 26 Features ............................................ 4 Recording from CDs utilizing the EDIT
Resumen del contenido incluido en la página 11
English Precautions: Read this before operating your system n To assure the finest performance, please read this manual n The voltage to be used must be the same as that specified on carefully. Keep it in a safe place for future reference. this system. Using this system with a higher voltage than specified is dangerous and may result in a fire or other types of n Choose the installation location of this system carefully. Avoid accidents causing damage. YAMAHA will not be held placing it in direc
Resumen del contenido incluido en la página 12
Precautions: Read this before operating your system WARNING This system is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this system To reduce the risk of fire or electric shock, do not expose this itself is turned off. This state is called the standby mode. system to rain or moisture. In this state, this system is designed to consume a certain amount of power. To avoid electric shock, do not open the cabinet. Refer servicing to qualified perso
Resumen del contenido incluido en la página 13
English Precautions: Read this before operating your system NOTES ABOUT DISCS • Discs are not affected by small particles of dust or fingerprints To prevent a malfunction of this on their playing surface, but even so they should be kept clean. system: Wipe by using a clean, dry cloth. Do not wipe with a circular • Do not use any nonstandard shaped disc motion; wipe straight outward from the center. (heart etc.) available on the market because it might damage the system. • Do not use a disc with
Resumen del contenido incluido en la página 14
Features General CD Player • 5-Speaker Multi-Channel Audio System (Two • 3-Disc Carousel Type CD Changer Front, One Center and Two Paralleled Rear • PLAYXCHANGE Speakers) Disc changing while playing • High Power Output • 20-Track Random Access Programming Front L, R: 80W + 80W (6Ω) RMS, 0.9% THD, 1 kHz • Repeat Play for Single Track/Entire Disc/All Center: 80W (6Ω) RMS Output Power, 0.9% Discs THD, 1 kHz • Random Sequence Play Rear: 25W (6Ω) RMS Output Power, 0.9% THD, 1 kHz Tape Deck • 4 Extern
Resumen del contenido incluido en la página 15
English 30° Preparations and connections Installing batteries in the remote control 1 Turn the remote control over and remove the battery compartment cover by sliding it in the direction of the mark. 2 Insert the batteries (AA, R6, UM-3 type) according to the polarity markings on the inside of the battery compartment. 1 3 Attach the battery compartment cover. 3 Notes 2 • Be sure the polarities are correct. (see the illustration inside the battery compartment.) • Remove the batteries if the remo
Resumen del contenido incluido en la página 16
Preparations and connections Setting up the speakers n 4 channel 5 speaker configuration Front L Center Front R This system employs a 5 speaker configuration: 2 front speakers, 2 rear paralleled speakers and a center speaker. Dialogue The front speakers are used for outputting main source sound. The rear speakers are for effect and surround sounds when the sound field program PRO LOGIC or HALL is selected. The center speaker is for center sounds (dialogue etc.) when the sound field program PRO
Resumen del contenido incluido en la página 17
English Preparations and connections 60 mm n Mounting the rear speakers Mount the rear speakers on a shelf, rack or on the floor, or hang them on the wall. To mount the rear speakers by using commercially available speaker stands The provided mounting bracket has 1 pair of screw holes (at an interval of 60 mm). They are for mounting the speaker on a speaker stand. * These screw holes can be used with M4 screws only. Note Mounting bracket It is recommended that you connect the speaker cords to th
Resumen del contenido incluido en la página 18
Preparations and connections Connections Never plug the AC supply lead of this system into the AC outlet until all connections are completed. Subwoofer system (not included in this system) Center speaker Rear speaker Rear speaker L R INPUT SPEAKERS SEE OWNER'S MANUAL FOR CONNECTION. REAR R CENTER L REAR SUBWOOFER VIDEO SIGNAL OUT Front speakers MONITOR OUT R L L R OUT VCR CENTER:6 MIN./SPEAKER IN REAR: 12 MIN./SPEAKER VIDEO OUT MAINS AUX/MD IN R FRONT L 6 MIN./SPEAKER SPEAKERS To AC outle
Resumen del contenido incluido en la página 19
English Preparations and connections n Antenna connection (1) ANTENNA (1) Supplied FM antenna FM GND AM Connect the FM antenna wire to the corresponding terminal and direct it to the direction where the strongest signal can be received. 75 UNBAL. (2) Supplied AM loop antenna Connect the AM loop antenna wires to the corresponding terminals. Position the AM loop antenna for optimum reception. ANTENNA FM GND AM Notes 75 UNBAL. • When static is still heard even after adjusting the position of th
Resumen del contenido incluido en la página 20
Preparations and connections Setting the clock 1 While the power is on, press DISPLAY to display time. DISC1 DISC2 DISC3 DISC CHANGE OPEN/CLOSE 2 While holding down TIME ADJ, press HOUR and set the hour. DIGITAL AUDIO 3–DISC CD CHANGER * Press HOUR once to advance the time by 1 hour. Press and STANDBY PROGRAM B.BOOST MUSIC hold to advance continuously. STANDBY /ON TIMER VOLUME 3 While holding down TIME ADJ, press MIN and set the minute. INPUT PRESET/TUNING/BAND A/B/C/D/E / UP * Press MIN once
