Resumen del contenido incluido en la página 1
CAM6.6T-S1 System
6-Zone, 6-Source
AM/FM Receiver and
UNO-S1 Smart Keypads
INSTRUCTION MANUAL
Resumen del contenido incluido en la página 2
IMPORTANT SAFEGUARDS 9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 10.Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11.Grounding or Polarization - Precaution should be taken so that the WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, grounding or polarizatio
Resumen del contenido incluido en la página 3
TABLE OF CONTENTS USER SECTION Product Introduction ............................................................................................................6 Component Guide CAM6.6 Controller...............................................................................................................7 UNO-S1 Keypad ..................................................................................................................8 UNO-S2 Keypad (Optional)......................................
Resumen del contenido incluido en la página 4
TABLE OF CONTENTS Source IR Input Connections ..............................................................................................30 Common IR Input Connection .............................................................................................31 Speaker Connections ........................................................................................................32 Zone Fixed/Variable Audio Output...........................................................................
Resumen del contenido incluido en la página 5
P U E T IN O PWR VID UNO DVD TV LOCAL SOURCE CONTROL 1 2 3 4 5 6 7 8 9 MUTE 0 ENTER LAST VOL SLEEP CH INPUT GUIDE XI SELECT F MENU F1 F2 1 2 3 4 INPUT 56 7 8 T E S USER SECTION Component Guides Explains front panel features of the CAM6.6 controller, UNO-S1 keypad, optional UNO-S2 keypad and UNO-LRC1 remote control. Operation Step-by-step outline of the system's normal operation, plus a look at adjustable features available through the User Menu. 5
Resumen del contenido incluido en la página 6
PRODUCT INTRODUCTION ® Thank you for choosing the Russound CAM6.6T-S1 System to enhance your home with distributed audio. This system’s state-of-the-art features and components blend seamlessly with your unique lifestyle and preferences. Besides distributing and controlling six audio sources to six rooms (zones), your CAM6.6T-S1 System offers many features that increase your enjoyment of living. Here are several that you may find partic- ularly beneficial. Internal Source The CAM6.6T includes a
Resumen del contenido incluido en la página 7
USER COMPONENT GUIDE CAM6.6 Controller-Front Panel 2 1 1 MAIN POWER SWITCH - Supplies power to the CAM6.6 ROOM LED ON/OFF INDICATORS - Indicates when a room is on (green) or off (red) 2 Main Power and Zone Status The power switch for the CAM6.6 controller is “on” in the up position. Any active room (1-6) is indicated on the front of the controller by a green LED, which shows red when the room is inactive. In most basic installations, all functions and room set- tings are controlled through the
Resumen del contenido incluido en la página 8
USER COMPONENT GUIDE UNO-S1 Keypad 1 102.5 2 6 3 5 4 1 LCD PANEL - 5-character backlit display shows status of the room, source, volume, and more 2 SOURCE SELECT BUTTON - Scrolls through the sources directly connected to the CAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. 3 VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room 4 IR RECEIVER - Receives IR signals and passes them to the controller and source equip- ment. Also used when operating the UNO
Resumen del contenido incluido en la página 9
USER COMPONENT GUIDE Optional UNO-S2 Keypad 1 7 CD PLAYER 1 2 6 3 5 4 1 LCD PANEL - 12-character backlit display shows status of the room, source, volume, and more 2 SOURCE SELECT BUTTON - Scrolls through the sources directly connected to the CAM6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. 3 VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room 4 IR RECEIVER - Receives IR signals and passes them to the controller and source equip- ment. Also used when
Resumen del contenido incluido en la página 10
USER COMPONENT GUIDE UNO-LRC1 Remote Control 3 2 4 1 LOCAL DEVICE BUTTONS - Select local source to be controlled by UNO-LRC1. 2 SETUP - Use for programming UNO-LRC1 using 1 the built-in library or by learning-in codes. 3 UNO SOURCE BUTTON - Selects UNO Keypad for control by UNO-LRC1. 4 ROOM ON/OFF - Turns room on and off while in the UNO mode. 5 NUMBER BUTTONS - Buttons (0-9) for direct selection of channels or tracks. 5 6 INPUT - Scrolls through sources connected to the CAM6.6 while in the UNO
Resumen del contenido incluido en la página 11
USER OPERATION UNO-S1 Keypad Zone On/Off Press and release to turn on the UNO used to enter the User Menu with a press and System Keypad. This also turns on the corre- hold action. (See next page for User Menu) sponding CAM6.6’s room, and any presets previ- Volume Up/Down Buttons ously assigned will be activated, including set- The room’s audio output is adjusted using . tings for bass, volume, last source selected, Command Keys etc. Press and release to turn off the UNO The command keys allow
Resumen del contenido incluido en la página 12
USER USER MENU SETTINGS UNO-S1 User Menu Operation The User Menu allows the user to adjust the Party Mode command from affecting this room. audio properties and control functions of a par- When another UNO Systems Keypad selects the ticular room. same source, a DND message will scroll on the the LCD panel, alerting the user the source is in To enter or exit the User Menu, press and hold during normal operation. The following keys Do Not Disturb mode. are used to navigate and make changes whil
Resumen del contenido incluido en la página 13
USER OPERATION Optional UNO-S2 Keypad Zone On/Off Press and release to turn on the UNO used to enter the User Menu with a press and System Keypad. This also turns on the corre- hold action. (See next page for User Menu) sponding CAM6.6’s room, and any presets previ- Volume Up/Down Buttons ously assigned will be activated, including set- The room’s audio output is adjusted using . tings for bass, volume, last source selected, F1 and F2 Buttons etc. Press and release to turn off the UNO The a
Resumen del contenido incluido en la página 14
USER USER MENU SETTINGS Optional UNO-S2 User Menu Operation The User Menu allows the user to adjust the 7. DO NOT DSTRB - On or Off (default) audio properties and control functions of a par- Do Not Disturb means do not disturb this room ticular room. or selected source. This stops pages from The following keys are used to navigate and being sent to this room, stops an “All Off," "All make changes while using the User Menu: On" or Party Mode command from affecting this room. To enter the User
Resumen del contenido incluido en la página 15
USER INTERNAL SOURCE - AM/FM TUNER UNO-S1 Keypad Control Selecting the desired frequency UNO-S1 Keypad Control of Tuner Selecting the tuner Press and hold or to activate manual On the UNO-S1 keypad, press to select the tuning. Once active, press or to scroll AM/FM tuner by choosing the tuner’s preas- through frequencies. The frequency will scroll signed source number (1). twice on the keypad then stop and display the station’s first 5 characters. 1 TUNER SELECTION - Select source number assigne
Resumen del contenido incluido en la página 16
USER INTERNAL SOURCE - AM/FM TUNER UNO-S2 Keypad Control of six called banks, and there are six banks. UNO-S2 Keypad Control of Tuner Selecting the tuner Each preset and each bank can be given a cus- tom name of your choice. On the UNO-S2 keypad, press to select the To select a bank, press and hold for bank AM/FM tuner by choosing the tuner’s preas- up or for bank down. The bank’s name will signed source number (1). be temporarily displayed on the UNO-S2. Banks Selecting the desired band and me
Resumen del contenido incluido en la página 17
USER INTERNAL SOURCE - AM/FM TUNER UNO-S2 Keypad Control 1 6 92.5 MHz FM 5 2 4 3 1 4 SCAN - (press and hold) Scans through tuned sta- TUNER SELECTION - Select source number tions with 5-second preview before next station assigned to AM/FM TUNER (1) 5 MUTE - Mutes/unmutes tuner audio output 2 TUNE UP/DOWN - Used for manual station selection 6 BANK SELECT - (press and hold) Used for bank selection 3 SELECT - Selects AM or FM band 6 MEM UP/DOWN - (press) Scrolls through memory 4 SEEK - (press) Se
Resumen del contenido incluido en la página 18
USER INTERNAL SOURCE - AM/FM TUNER UNO-LRC1 Remote Control Frequency Scan UNO-LRC1 Control of Tuner Selecting the tuner To scan, press and hold then release . The To select the tuner, push and choose the tuner scans through tuned stations with a 5-second source number preassigned to the AM/FM tuner (1), preview before moving to the next station. To end or use the UNO numeric source inputs at the bottom scanning, press again. of the UNO-LRC1. Selecting a Bank Selecting the desired band To sele
Resumen del contenido incluido en la página 19
USER INTERNAL SOURCE - AM/FM TUNER UNO-LRC1 Remote Control 1 POWER - Power managed by CAM6.6 UNO SELECTION - UNO must be the selected source for control of the 2 NUMERIC INPUT - (press) Number buttons for CAM6.6 and any connected compo- direct input of frequency, preset, bank nents. Select UNO before sending UNO-LRC1 remote commands. 2 MEMORY PRESETS - (press and hold) Number buttons (1-6) for saving memory presets 3 TUNE UP/DOWN - Incrementally scrolls through 1 tuned stations 4 TUNE UP/DOWN
Resumen del contenido incluido en la página 20
CAUTION Do not connect the controller's main power feed until all other connections have been made and verified. Live connection or removal of the keypad wiring or other wiring when the system is powered can cause communication problems in the network. Double-check terminations during each phase of the installation to prevent accidental damage. Incorrect wiring is the number one cause for non-warranty product damage. 20
